|
Fragmatic posted:Does partizan count? Why, yes, yes it does.  I actually just got a set of MARPAT in today, I'm curious to see how it does this weekend.
|
| # ? Mar 5, 2010 02:33 |
|
|
|
| # ? May 25, 2013 22:06 |
|
|
Quick question: I've got an Echo1 M8A3 (just a plain M4 clone) with a 14mm adapter at the end of the barrel, where the RIS ends. I don't really like the look of just removing the barrel and adding a suppressor onto the end. What are my options? Is it possible to find a birdcage adapter for a suppressor or do I have to get a different barrel extension? On a side note - I got a Condor/OETech plate carrier in the mail on Tuesday and it's awesome. Really sturdy build quality. Now I need to buy a bunch of mag pouches for it.
|
| # ? Mar 5, 2010 06:34 |
|
|
MJP posted:Related to that big Chinese government crackdown that supposedly hit A&K and Cyma? I didn't know they were hit that hard; they seem to be getting prototypes out to AirsoftGI for review and whatnot. Rumor has it that Ares tried importing a whole bunch of new guns and they've been sitting at customs for awhile now. This is pushing back the date at which I have an Ares LMG slung from my pack and I am not happy. Railoc posted:That sucks, but to be fair, the guns DIDN'T have the orange tips like they should have. Forums user Buff Butler has told me a parable about Chinese manufacturers that I love retelling. He says "[In my experience] if you tell a Chinese manufacturer to ship a product and write 'this and this and that' on the box, they will literally write, 'write this and this and that on the box.'" cuntrageous fucked around with this message at Mar 5, 2010 around 12:05 |
| # ? Mar 5, 2010 11:54 |
|
|
anuj posted:Quick question: I've got an Echo1 M8A3 (just a plain M4 clone) with a 14mm adapter at the end of the barrel, where the RIS ends. I don't really like the look of just removing the barrel and adding a suppressor onto the end. What are my options? Is it possible to find a birdcage adapter for a suppressor or do I have to get a different barrel extension? I don't know why you would have to remove the barrel? You can just get a QD suppressor if you have an M16/M4 style flash hider on it. It clamps into the round grooves on the back of the flash hider. The downside is you need to ave some space between the ris and the flash hider because it sits 2-3in back from the front of the barrel.
|
| # ? Mar 5, 2010 12:05 |
|
|
cuntrageous posted:I don't know why you would have to remove the barrel? Yeah, I worded my first post wrong. So I'd need to get something like this?
|
| # ? Mar 5, 2010 22:15 |
|
|
anuj posted:Yeah, I worded my first post wrong. So I'd need to get something like this? Yeah or like the madbull gemtech qds. They all basically work the same.
|
| # ? Mar 6, 2010 00:07 |
|
|
cuntrageous posted:Yeah or like the madbull gemtech qds. They all basically work the same. Alright, thanks for your help. I noticed the flash hider has a hex screw which came out pretty easily, but there is some sort of secondary tiny roll pin that won't come out. Do I have to cut that out or what?
|
| # ? Mar 6, 2010 00:35 |
|
|
Curse you New Zealand semi-auto only laws! http://www.youtube.com/watch?v=Xwnk...feature=related http://vimeo.com/6126893 (Strafer MK 4, 7000 rounds, 150 rounds per second)
|
| # ? Mar 8, 2010 05:29 |
|
|
Basilson posted:Curse you New Zealand semi-auto only laws! All their stuff is really cool, but it they are far too ridiculous to use in a normal game. No one in their right mind would ever go up against one in a game. From a technical aspect they are cool as hell, but thats about it.
|
| # ? Mar 8, 2010 09:47 |
|
|
I'm thinking about getting into airsofting, a friend invited me to join his group that does it and I need to buy a gun. I also have a huge hardon for AK47s. Does anyone know of a good AK47 replica for someone new to the sport?
|
| # ? Mar 9, 2010 00:01 |
|
|
Reportedly, CYMA make decent AKs for pretty drat cheap. drat good starter guns. That's what I heard anyway.
|
| # ? Mar 9, 2010 00:14 |
|
|
Forti posted:Reportedly, CYMA make decent AKs for pretty drat cheap. Thanks for the lead 
|
| # ? Mar 9, 2010 00:16 |
|
|
Forti posted:Reportedly, CYMA make decent AKs for pretty drat cheap. err, not really. If you want a starter gun, look at echo 1 or JG. CYMA is one of the lowest end chinese clone companies. If you start getting into airsoft more you're gonna wish you bought something better than the CYMA. Buy cheap, buy twice
|
| # ? Mar 9, 2010 01:49 |
|
|
From what I'm beginning to gather, the supposed quality of chinese guns depends entirely on how the underpaid chinese slave who happens to be working on your gun, feels that day. Having owned three JGs, I can attest to this. CYMA do the best clone M14s from what I've heard and a range of pretty impressive AKs. I'd consider one of these myself. http://www.airsoftgi.com/product_in...roducts_id=4738
|
| # ? Mar 9, 2010 02:23 |
|
|
cyma is actually pretty great quality as far as cheapos go.
|
| # ? Mar 9, 2010 02:37 |
|
|
Forti posted:Reportedly, CYMA make decent AKs for pretty drat cheap. These are both two awesome starter AKs available through my wholesaler, and probably mid-range AKs even in my opinion. 135 US + shipping http://www.vertexairsoft.com/JG-Jin...A4-p/jg1010.htm 118 US + shipping http://www.vertexairsoft.com/product-p/cm028s.htm I got a JG clone of the Tokyo Marui AK Beta Spetsnaz except in AK pistol form with no stock and 3 mags for 75 dollars + shipping through the same guy I was really happy with as well. I'd recommend a version of that gun with the folding stock or full stock as a great starter platform AK as well. Pretty Little Rainbow fucked around with this message at Mar 9, 2010 around 07:38 |
| # ? Mar 9, 2010 07:35 |
|
|
I snagged a Cybergun wood and metal AK out of the Kapowwe boneyard, gave it a little TLC, ran a Deans connector up to the receiver cover, and used some GooGone to remove the Kalashnikov logo poo poo. End result is a rather stunning and rock solid brand new gun for about 100 bucks. It definitely needed a little love and some tightening of the screws but the basic gun is quite, quite impressive. Also, PLR, the Skorpion rail is held on with a little bolt that screws into the front underside of the gun, to resurrect a long dead question.
|
| # ? Mar 9, 2010 17:39 |
|
|
what is the best way to oil a gun? i have my 100% silicon lube i know that much. should i just put a drop or two in the barrel and the feed from the clip and let it sit for awhile. or should i do the above and then fire some bb's. this gun, my KWA Mk36c is my first expensive AEG and i want it to last
|
| # ? Mar 9, 2010 19:54 |
|
|
Balphazar posted:what is the best way to oil a gun? i have my 100% silicon lube i know that much. Shoot a quick spray up through the mag well into the feed nozzle. Also, put a little into your mags, then run a about 100 rounds through the gun or until the bb's stop flying erratically. Thats about all you can do without getting into the gearbox. If you know how, i'd recommend taking the barrel/hopup unit apart and running a patch to clean the barrel out, but that won't hurt anything.
|
| # ? Mar 9, 2010 20:03 |
|
|
INTERNETRACECAR posted:I snagged a Cybergun wood and metal AK out of the Kapowwe boneyard, gave it a little TLC, ran a Deans connector up to the receiver cover, and used some GooGone to remove the Kalashnikov logo poo poo. Thanks, I figured as much after reading a review. Theres no place to put a screw in that part of the gun in reality without modifying my lower receiver so I'm going to have to come up with another design.
|
| # ? Mar 9, 2010 20:28 |
|
|
airsoffffffff tit's accurate to about 5 gfeet.
|
| # ? Mar 10, 2010 00:23 |
|
|
Crunkjuice posted:Shoot a quick spray up through the mag well into the feed nozzle. Also, put a little into your mags, then run a about 100 rounds through the gun or until the bb's stop flying erratically. Thats about all you can do without getting into the gearbox. If you know how, i'd recommend taking the barrel/hopup unit apart and running a patch to clean the barrel out, but that won't hurt anything. thanks for the advice, i'll look up a more detailed instruction on taking my gun apart if the need arises.
|
| # ? Mar 10, 2010 01:18 |
|
|
Has anyone had problems with striping the pinion gear out of systema motors? It was on so tight that I had to grind it off, I may have killed the shaft in the process.
|
| # ? Mar 14, 2010 06:27 |
|
|
Crash74 posted:Has anyone had problems with striping the pinion gear out of systema motors? It was on so tight that I had to grind it off, I may have killed the shaft in the process. They red loctite the everloving poo poo out of the set screw, so you've gotta burn it out or soften it up before you can even put the hex key in there. You can probably still make it work, though.
|
| # ? Mar 14, 2010 12:38 |
|
|
I need to sell a delicious ICS Galil ARM for $310: http://forums.somethingawful.com/sh...hreadid=3279770 It has some mechbox issues; the motor spins but it doesn't actually fire. Hence the low price. It's awaiting repair in the queue at my local shop so if you want, it can be yours for $310 + cost of repairs, or you can snag it at the bargain price if you want to take a look at it yourself. Help me afford tuition!
|
| # ? Mar 15, 2010 14:26 |
|
|
cuntrageous posted:airsoffffffff  
|
| # ? Mar 15, 2010 15:38 |
|
|
Is that glock a springer or something? Do you have to rack it forward like some kind of reverse shotgun?
|
| # ? Mar 15, 2010 20:51 |
|
|
Full auto AEP man. If money allows, it will be fitted with a rail and a rail-to-rail adaptor so we can stick it on permenantly.
|
| # ? Mar 15, 2010 21:37 |
|
|
Forti posted:Full auto AEP man. AEPs own. It's so very tempting to go balls-out on one of my Skorpions so they push 350 fps at a zillion bbs/sec, but bigger guns take precedence.
|
| # ? Mar 15, 2010 21:43 |
|
|
Forti posted:Full auto AEP man. It should be a springer with 6mm paint ball BB's 
|
| # ? Mar 15, 2010 22:10 |
|
|
Just in case anyone has any interest before I put this on eBay, I'm selling all of my gear. It's pretty much impossible to own this crap in NYC since just driving with it is a big deal, so it has to go. All this stuff is in excellent condition, literally never taken to a game. Perfect if you want to get into the game and don't feel like buying everything separately.   
|
| # ? Mar 15, 2010 23:53 |
|
|
How much for the Pistol and Chest Rig? E: Got it, you can remove it now. \/\/\/ Magnum1371 fucked around with this message at Mar 16, 2010 around 00:44 |
| # ? Mar 16, 2010 00:24 |
|
|
The pistol is a Socom Gear MEU and comes with 4 mags, silencer and Madbull barrel. The chest rig is a King Arms Wasatch and comes with a belt rig with dump pouch and a 1911 Serpa for the MEU. I would really like to sell both as a package, but I don't want to clutter this thread.
The Worst fucked around with this message at Mar 16, 2010 around 02:35 |
| # ? Mar 16, 2010 00:34 |
|
|
Question: I used to play airsoft, and I'm now starting to get into small game hunting and a lot of air rifles have caught my eye. However, I can totally see myself hooking up with old friends to play some airsoft again. Are there any BB or air guns that fire both .177" bb/pellet rounds and .12/.20g plastic airsoft rounds? Probably not 
|
| # ? Mar 16, 2010 01:35 |
|
|
Magnum1371 posted:How much for the Pistol and Chest Rig? I was under the impression from other posts you've made that you lived in Australia where airsoft is outright banned? Curious cos I used to live there (now in more airsoft friendly NZ) and just wondering if they've relaxed the rules a bit or what? Also, not a stalker.
|
| # ? Mar 16, 2010 02:28 |
|
|
Got another gun on the selling block - TM P90 RDV with Private Parts M4 magwell adapter, three P90 mags, TM velocity reducer, and battery. Looking to get $260 shipped. http://forums.somethingawful.com/sh...hreadid=3280436
|
| # ? Mar 17, 2010 02:06 |
|
|
Basilson posted:I was under the impression from other posts you've made that you lived in Australia where airsoft is outright banned? I do, I'm having it sent to my Home address in the care of family.
|
| # ? Mar 17, 2010 03:59 |
|
|
So did you buy the MEU/rig already? I PM'd The Worst and he said they were still available but he hasn't replied since.. :[
|
| # ? Mar 17, 2010 17:28 |
|
|
Anyone know of some ammo pouches that will hold two G36 mags fitted together?
|
| # ? Mar 18, 2010 00:52 |
|
|
|
| # ? May 25, 2013 22:06 |
|
|
cuntrageous posted:Anyone know of some ammo pouches that will hold two G36 mags fitted together? I don't know from experience, but if it can hold 3 ak mags in a single shingle, i'd imagine it could hold 2xg36 mags. http://redwolfairsoft.com/redwolf/a..._OD_CORDURA.htm Maybe some other sort of utility/medic/canteen pouch would fit them better, you'd have to find a bunch and try em out.
|
| # ? Mar 18, 2010 01:20 |
|
