|
most of them hold up pretty good considering how badly people who don't fit neatly into one of the like two preapproved sexual roles can get treated by folks with more malignant sexual hangups. vive la difference is what I say
|
#
?
Mar 29, 2015 07:12
|
|
|
|
| # ? Apr 25, 2024 18:33 |
|
|
I still need to pee.
|
|
#
?
Mar 29, 2015 07:13
|
|
|
agreed, op.
|
|
#
?
Mar 29, 2015 07:14
|
|
|
stfu op.
|
|
#
?
Mar 29, 2015 07:15
|
|
|
i'm so horny all the time that even when i discuss philosophy i have to figure out how to work dongs and pussies into my worldview
|
|
#
?
Mar 29, 2015 07:16
|
|
|
A Wizard of Goatse posted:most of them hold up pretty good considering how badly people who don't fit neatly into one of the like two preapproved sexual roles can get treated by folks with more malignant sexual hangups. vive la difference is what I say world is pretty bad for many people i just cant respect anyone in the 1st world who ponders day and night about their gender and ways to acquire illegal horse hormones imo its a stupid problem to have or worry about
|
|
#
?
Mar 29, 2015 07:18
|
|
|
JebanyPedal posted:I still need to pee. very well
|
|
#
?
Mar 29, 2015 07:18
|
|
|
Top City Homo posted:world is pretty bad for many people consider how many people just in the part of the first world that is this forum ponder cartoons day and night gotta think about something
|
|
#
?
Mar 29, 2015 07:23
|
|
|
A Wizard of Goatse posted:consider how many people just in the part of the first world that is this forum ponder cartoons day and night everything that anyone thinks about here is incredibly stupid, but especially in GBS.
|
|
#
?
Mar 29, 2015 07:24
|
|
|
would censored to ensure no namedrops
|
|
#
?
Mar 29, 2015 07:24
|
|
|
Well, I think that... :iamafag:
|
|
#
?
Mar 29, 2015 07:24
|
|
|
I'm regretting eating those Kit-Kat bars, not because they're bad for me, but because I should have spent my last calories on something that didn't taste like crap.
|
|
#
?
Mar 29, 2015 07:25
|
|
|
LeoMarr posted:would It's like Mr. Spock grew Breasts.
|
|
#
?
Mar 29, 2015 07:25
|
|
|
so much wasted human potential even our idiot military cant help these people
|
|
#
?
Mar 29, 2015 07:25
|
|
|
Top City Homo posted:so much wasted human potential [shakes my drat Head at the whole gay system]
|
|
#
?
Mar 29, 2015 07:27
|
|
|
Thats not very nice. Please stop posting my pics. Seriously. 
|
|
#
?
Mar 29, 2015 07:27
|
|
|
But on the other hand I can't think of what I could have eaten otherwise. There's roast beef, but gently caress that, there was kefir but I don't think liquid would have been satisfying either. There was some chocolate but it looked like grody cheap stuff. I guess Kit-Kats are too but like, I knew they wouldn't kill me.
|
|
#
?
Mar 29, 2015 07:28
|
|
|
JebanyPedal posted:But on the other hand I can't think of what I could have eaten otherwise. There's roast beef, but gently caress that, there was kefir but I don't think liquid would have been satisfying either. kit kats are bad chocolate i recommend twix two for me none for you lol
|
|
#
?
Mar 29, 2015 07:29
|
|
|
Top City Homo posted:kit kats are bad chocolate Don't have those, we had some of those candied chocolate eggs but I don't eat them because they're like crack and I can't stop.
|
|
#
?
Mar 29, 2015 07:31
|
|
|
Some trans ppl are good some are very bad
|
|
#
?
Mar 29, 2015 07:32
|
|
|
Mange Mite posted:Some trans ppl are good some are very bad
|
|
#
?
Mar 29, 2015 07:36
|
|
|
Mange Mite posted:Some trans ppl are good some are very bad the ones in prison keep clean cells no joke
|
|
#
?
Mar 29, 2015 07:37
|
|
|
JebanyPedal posted:Don't have those, we had some of those candied chocolate eggs but I don't eat them because they're like crack and I can't stop. thats good poo poo i loving love 
|
|
#
?
Mar 29, 2015 07:39
|
|
|
dide o ficlomg ;pve a trasm,ossopm
|
|
#
?
Mar 29, 2015 07:57
|
|
|
Top City Homo posted:kit kats are bad chocolate this reminds me of the coffee flavored twix which I haven't seen in years 
|
|
#
?
Mar 29, 2015 07:59
|
|
|
Transmission (mechanics) From Wikipedia, the free encyclopedia For other uses, see Transmission_(disambiguation). "Gearbox" redirects here. For the video game developer, see Gearbox Software. For the transmission component, see gear train. Gears from a five-speed + reverse gearbox from the 1600 Volkswagen Golf (2009). A machine consists of a power source and a power transmission system, which provides controlled application of the power. Merriam-Webster defines transmission as an assembly of parts including the speed-changing gears and the propeller shaft by which the power is transmitted from an engine to a live axle.[1] Often transmission refers simply to the gearbox that uses gears and gear trains to provide speed and torque conversions from a rotating power source to another device.[2][3] In British English, the term transmission refers to the whole drivetrain, including clutch, gearbox, prop shaft (for rear-wheel drive), differential, and final drive shafts. In American English, however, the term refers more specifically to the gearbox alone, and the usage details are different.[note 1] The most common use is in motor vehicles, where the transmission adapts the output of the internal combustion engine to the drive wheels. Such engines need to operate at a relatively high rotational speed, which is inappropriate for starting, stopping, and slower travel. The transmission reduces the higher engine speed to the slower wheel speed, increasing torque in the process. Transmissions are also used on pedal bicycles, fixed machines, and where different rotational speeds and torques are adapted. Often, a transmission has multiple gear ratios (or simply "gears"), with the ability to switch between them as speed varies. This switching may be done manually (by the operator), or automatically. Directional (forward and reverse) control may also be provided. Single-ratio transmissions also exist, which simply change the speed and torque (and sometimes direction) of motor output. In motor vehicles, the transmission generally is connected to the engine crankshaft via a flywheel and/or clutch and/or fluid coupling, partly because internal combustion engines cannot run below a particular speed. The output of the transmission is transmitted via driveshaft to one or more differentials, which in turn, drive the wheels. While a differential may also provide gear reduction, its primary purpose is to permit the wheels at either end of an axle to rotate at different speeds (essential to avoid wheel slippage on turns) as it changes the direction of rotation. Conventional gear/belt transmissions are not the only mechanism for speed/torque adaptation. Alternative mechanisms include torque converters and power transformation (for example, diesel-electric transmission and hydraulic drive system). Hybrid configurations also exist. Single stage gear reducer. Contents [hide] 1 Explanation 2 Uses 3 Simple 4 Multi-ratio systems 4.1 Automotive basics 4.2 Manual 4.3 Non-synchronous 4.4 Automatic 4.5 Semi-automatic 4.6 Bicycle gearing 5 Uncommon types 5.1 Dual clutch transmission 5.2 Continuously variable 5.3 Infinitely variable 5.4 Electric variable 6 Non-direct 6.1 Electric 6.2 Hydrostatic 6.3 Hydrodynamic 7 See also 8 Notes 9 References 10 Further reading 11 External links Explanation[edit] Transmission types Manual Sequential manual Non-synchronous Preselector Automatic Manumatic Semi-automatic Electrohydraulic Saxomat Dual-clutch Continuously variable Bicycle gearing Derailleur gears Hub gears v t e Interior view of Pantigo Windmill, looking up into cap from floor—cap rack, brake wheel, brake and wallower. Pantigo Windmill is located on James Lane, East Hampton, Suffolk County, Long Island, New York. Early transmissions included the right-angle drives and other gearing in windmills, horse-powered devices, and steam engines, in support of pumping, milling, and hoisting. Most modern gearboxes are used to increase torque while reducing the speed of a prime mover output shaft (e.g. a motor crankshaft). This means that the output shaft of a gearbox rotates at a slower rate than the input shaft, and this reduction in speed produces a mechanical advantage, increasing torque. A gearbox can be set up to do the opposite and provide an increase in shaft speed with a reduction of torque. Some of the simplest gearboxes merely change the physical rotational direction of power transmission. Many typical automobile transmissions include the ability to select one of several different gear ratios. In this case, most of the gear ratios (often simply called "gears") are used to slow down the output speed of the engine and increase torque. However, the highest gears may be "overdrive" types that increase the output speed. Uses[edit] Gearboxes have found use in a wide variety of different—often stationary—applications, such as wind turbines. Transmissions are also used in agricultural, industrial, construction, mining and automotive equipment. In addition to ordinary transmission equipped with gears, such equipment makes extensive use of the hydrostatic drive and electrical adjustable-speed drives. Simple[edit] The main gearbox and rotor of a Bristol Sycamore helicopter The simplest transmissions, often called gearboxes to reflect their simplicity (although complex systems are also called gearboxes in the vernacular), provide gear reduction (or, more rarely, an increase in speed), sometimes in conjunction with a right-angle change in direction of the shaft (typically in helicopters, see picture). These are often used on PTO-powered agricultural equipment, since the axial PTO shaft is at odds with the usual need for the driven shaft, which is either vertical (as with rotary mowers), or horizontally extending from one side of the implement to another (as with manure spreaders, flail mowers, and forage wagons). More complex equipment, such as silage choppers and snowblowers, have drives with outputs in more than one direction. The gearbox in a wind turbine converts the slow, high-torque rotation of the turbine into much faster rotation of the electrical generator. These are much larger and more complicated than the PTO gearboxes in farm equipment. They weigh several tons and typically contain three stages to achieve an overall gear ratio from 40:1 to over 100:1, depending on the size of the turbine. (For aerodynamic and structural reasons, larger turbines have to turn more slowly, but the generators all have to rotate at similar speeds of several thousand rpm.) The first stage of the gearbox is usually a planetary gear, for compactness, and to distribute the enormous torque of the turbine over more teeth of the low-speed shaft.[4] Durability of these gearboxes has been a serious problem for a long time.[5] Regardless of where they are used, these simple transmissions all share an important feature: the gear ratio cannot be changed during use. It is fixed at the time the transmission is constructed. For transmission types that overcome this issue, see Continuously Variable Transmission, also known as CVT. Multi-ratio systems[edit] Tractor transmission with 16 forward and 8 backward gears Amphicar gearbox cutaway w/optional shift for water going propellers Many applications require the availability of multiple gear ratios. Often, this is to ease the starting and stopping of a mechanical system, though another important need is that of maintaining good fuel efficiency. Automotive basics[edit] The need for a transmission in an automobile is a consequence of the characteristics of the internal combustion engine. Engines typically operate over a range of 600 to about 7000 revolutions per minute (though this varies, and is typically less for diesel engines), while the car's wheels rotate between 0 rpm and around 1800 rpm. Furthermore, the engine provides its highest torque and power outputs unevenly across the rev range resulting in a torque band and a power band. Often the greatest torque is required when the vehicle is moving from rest or traveling slowly, while maximum power is needed at high speed. Therefore, a system is required that transforms the engine's output so that it can supply high torque at low speeds, but also operate at highway speeds with the motor still operating within its limits. Transmissions perform this transformation. A diagram comparing the power and torque bands of a "torquey" engine versus a "peaky" one The dynamics of a car vary with speed: at low speeds, acceleration is limited by the inertia of vehicular gross mass; while at cruising or maximum speeds wind resistance is the dominant barrier. Many transmissions and gears used in automotive and truck applications are contained in a cast iron case, though more frequently aluminium is used for lower weight especially in cars. There are usually three shafts: a mainshaft, a countershaft, and an idler shaft. The mainshaft extends outside the case in both directions: the input shaft towards the engine, and the output shaft towards the rear axle (on rear wheel drive cars. Front wheel drives generally have the engine and transmission mounted transversely, the differential being part of the transmission assembly.) The shaft is suspended by the main bearings, and is split towards the input end. At the point of the split, a pilot bearing holds the shafts together. The gears and clutches ride on the mainshaft, the gears being free to turn relative to the mainshaft except when engaged by the clutches. Types of automobile transmissions include manual, automatic or semi-automatic transmission. Manual[edit] Main article: Manual transmission Manual transmissions come in two basic types: A simple but rugged sliding-mesh or unsynchronized/non-synchronous system, where straight-cut spur gear sets spin freely, and must be synchronized by the operator matching engine revs to road speed, to avoid noisy and damaging clashing of the gears The now common constant-mesh gearboxes, which can include non-synchronised, or synchronized/synchromesh systems, where typically diagonal cut helical (or sometimes either straight-cut, or double-helical) gear sets are constantly "meshed" together, and a dog clutch is used for changing gears. On synchromesh boxes, friction cones or "synchro-rings" are used in addition to the dog clutch to closely match the rotational speeds of the two sides of the (declutched) transmission before making a full mechanical engagement. The former type was standard in many vintage cars (alongside e.g. epicyclic and multi-clutch systems) before the development of constant-mesh manuals and hydraulic-epicyclic automatics, older heavy-duty trucks, and can still be found in use in some agricultural equipment. The latter is the modern standard for on- and off-road transport manual and semi-automatic transmission, although it may be found in many forms; e.g., non-synchronised straight-cut in racetrack or super-heavy-duty applications, non-synchro helical in the majority of heavy trucks and motorcycles and in certain classic cars (e.g. the Fiat 500), and partly or fully synchronised helical in almost all modern manual-shift passenger cars and light trucks. Manual transmissions are the most common type outside North America and Australia. They are cheaper, lighter, usually give better performance, but the newest automatic transmissions, and CVTs give better fuel economy.[6][7] It is customary for new drivers to learn, and be tested, on a car with a manual gear change. In Malaysia and Denmark all cars used for testing (and because of that, virtually all those used for instruction as well) have a manual transmission. In Japan, the Philippines, Germany, Poland, Italy, Israel, the Netherlands, Belgium, New Zealand, Austria, Bulgaria, the UK,[8] Ireland, Sweden, Norway, Estonia, France, Spain, Switzerland, the Australian states of Victoria,[9] Western Australia and Queensland, Finland, Latvia,[10] Lithuania and the Czech Republic, a test pass using an automatic car does not entitle the driver to use a manual car on the public road; a test with a manual car is required.[citation needed] Manual transmissions are much more common than automatic transmissions in Asia, Africa, South America and Europe. Manual transmissions can include both synchronized and unsynchronized gearing. For example, reverse gear is usually unsynchronised, as the driver is only expected to engage it when the vehicle is at a standstill. Many older (up to 1970s) cars also lacked synchronisation on first gear (for various reasons—cost, typically "shorter" overall gearing, engines typically having more low-end torque, the extreme wear on a frequently used first gear synchroniser ...), meaning it also could only be used for moving away from a stop unless the driver became adept at double-declutching and had a particular need to regularly downshift into the lowest gear. Some manual transmissions have an extremely low ratio for first gear, called a creeper gear or granny gear. Such gears are usually not synchronized. This feature is common on pick-up trucks tailored to trailer-towing, farming, or construction-site work. During normal on-road use, the truck is usually driven without using the creeper gear at all, and second gear is used from a standing start. Some off-road vehicles, most particularly the Willy's Jeep and its descendants, also had transmissions with "granny first"s either as standard or an option, but this function is now more often provided for by a low-range transfer gearbox attached to a normal fully synchronized transmission. Non-synchronous[edit] Main article: Non-synchronous transmissions Some commercial applications use non-synchronized manual transmissions that require a skilled operator. Depending on the country, many local, regional, and national laws govern operation of these types of vehicles (see Commercial Driver's License). This class may include commercial, military, agricultural, or engineering vehicles. Some of these may use combinations of types for multi-purpose functions. An example is a power take-off (PTO) gear. The non-synchronous transmission type requires an understanding of gear range, torque, engine power, and multi-functional clutch and shifter functions. Also see Double-clutching, and Clutch-brake sections of the main article. Automatic[edit] Main article: Automatic transmission Epicyclic gearing or planetary gearing as used in an automatic transmission. Most modern North American and Australian and some European and Japanese cars have an automatic transmission that selects an appropriate gear ratio without any operator intervention. They primarily use hydraulics to select gears, depending on pressure exerted by fluid within the transmission assembly. Rather than using a clutch to engage the transmission, a fluid flywheel, or torque converter is placed in between the engine and transmission. It is possible for the driver to control the number of gears in use or select reverse, though precise control of which gear is in use may or may not be possible. Automatic transmissions are easy to use. However, in the past, automatic transmissions of this type have had a number of problems; they were complex and expensive, sometimes had reliability problems (which sometimes caused more expenses in repair), have often been less fuel-efficient than their manual counterparts (due to "slippage" in the torque converter), and their shift time was slower than a manual making them uncompetitive for racing. With the advancement of modern automatic transmissions this has changed.[citation needed] Attempts to improve fuel efficiency of automatic transmissions include the use of torque converters that lock up beyond a certain speed or in higher gear ratios, eliminating power loss, and overdrive gears that automatically actuate above certain speeds. In older transmissions, both technologies could be intrusive, when conditions are such that they repeatedly cut in and out as speed and such load factors as grade or wind vary slightly. Current computerized transmissions possess complex programming that both maximizes fuel efficiency and eliminates intrusiveness. This is due mainly to electronic rather than mechanical advances, though improvements in CVT technology and the use of automatic clutches have also helped. A few cars, including the 2013 Subaru Impreza[11] and the 2012 model of the Honda Jazz sold in the UK, actually claim marginally better fuel consumption for the CVT version than the manual version. For certain applications, the slippage inherent in automatic transmissions can be advantageous. For instance, in drag racing, the automatic transmission allows the car to stop with the engine at a high rpm (the "stall speed") to allow for a very quick launch when the brakes are released. In fact, a common modification is to increase the stall speed of the transmission. This is even more advantageous for turbocharged engines, where the turbocharger must be kept spinning at high rpm by a large flow of exhaust to maintain the boost pressure and eliminate the turbo lag that occurs when the throttle suddenly opens on an idling engine. Semi-automatic[edit] Main article: Semi-automatic transmission A hybrid form of transmission where an integrated control system handles manipulation of the clutch automatically, but the driver can still—and may be required to—take manual control of gear selection. This is sometimes called a "clutchless manual", or "automated manual" transmission. Many of these transmissions allow the driver to fully delegate gear shifting choice to the control system, which then effectively acts as if it was a regular automatic transmission. They are generally designed using manual transmission "internals", and when used in passenger cars, have synchromesh operated helical constant mesh gear sets. Early semi-automatic systems used a variety of mechanical and hydraulic systems—including centrifugal clutches, torque converters, electro-mechanical (and even electrostatic) and servo/solenoid controlled clutches—and control schemes—automatic declutching when moving the gearstick, pre-selector controls, centrifugal clutches with drum-sequential shift requiring the driver to lift the throttle for a successful shift, etc.—and some were little more than regular lock-up torque converter automatics with manual gear selection. Most modern implementations, however, are standard or slightly modified manual transmissions (and very occasionally modified automatics—even including a few cases of CVTs with "fake" fixed gear ratios), with servo-controlled clutching and shifting under command of the central engine computer. These are intended as a combined replacement option both for more expensive and less efficient "normal" automatic systems, and for drivers who prefer manual shift but are no longer able to operate a clutch, and users are encouraged to leave the shift lever in fully automatic "drive" most of the time, only engaging manual-sequential mode for sporty driving or when otherwise strictly necessary. Specific types of this transmission include: Easytronic, Tiptronic and Geartronic, as well as the systems used as standard in all ICE-powered Smart-MCC vehicles, and on geared step-through scooters such as the Honda Super Cub or Suzuki Address. A dual-clutch transmission alternately uses two sets of internals, each with its own clutch, so that a "gearchange" actually only consists of one clutch engaging as the other disengages—providing a supposedly "seamless" shift with no break in (or jarring reuptake of) power transmission. Each clutch's attached shaft carries half of the total input gear complement (with a shared output shaft), including synchronised dog clutch systems that pre-select which of its set of ratios is most likely needed at the next shift, under command of a computerised control system. Specific types of this transmission include: Direct-Shift Gearbox. There are also sequential transmissions that use the rotation of a drum to switch gears, much like those of a typical fully manual motorcycle.[12] These can be designed with a manual or automatic clutch system, and may be found both in automobiles (particularly track and rally racing cars), motorcycles (typically light "step-thru" type city utility bikes, e.g., the Honda Super Cub) and quadbikes (often with a separately engaged reversing gear), the latter two normally using a scooter-style centrifugal clutch. Bicycle gearing[edit] Shimano XT rear derailleur on a mountain bike Main articles: Bicycle gearing, Derailleur gears and Hub gear Bicycles usually have a system for selecting different gear ratios. There are two main types: derailleur gears and hub gears. The derailleur type is the most common, and the most visible, using sprocket gears. Typically there are several gears available on the rear sprocket assembly, attached to the rear wheel. A few more sprockets are usually added to the front assembly as well. Multiplying the number of sprocket gears in front by the number to the rear gives the number of gear ratios, often called "speeds". Hub gears use epicyclic gearing and are enclosed within the axle of the rear wheel. Because of the small space, they typically offer fewer different speeds, although at least one has reached 14 gear ratios and Fallbrook Technologies manufactures a transmission with technically infinite ratios.[13] Several attempts have been made to fit bicycles with an enclosed gearbox, giving obvious advantages for better lubrication, dirt-sealing and shifting. These have usually been in conjunction with a shaft drive, as a gearbox with a traditional chain would (like the hub gear) still have many of the derailleur's disadvantages for an exposed chain. Bicycle gearboxes are enclosed in a box replacing the traditional bottom bracket. The requirement for a modified frame has been a serious drawback to their adoption. One of the most recent attempts to provide a gearbox for bicycles is the 18 speed Pinion P1.18.[14][15][16] This gives an enclosed gearbox, but still a traditional chain. When fitted to a rear suspension bike, it also retains a derailleur-like jockey cage chain tensioner, although without the derailleur's low ground clearance. Causes for failure of bicycle gearing include: worn teeth, damage caused by a faulty chain, damage due to thermal expansion, broken teeth due to excessive pedaling force, interference by foreign objects, and loss of lubrication due to negligence. Uncommon types[edit] Dual clutch transmission[edit] Main article: Dual clutch transmission This arrangement is also sometimes known as a direct shift gearbox or powershift gearbox. It seeks to combine the advantages of a conventional manual shift with the qualities of a modern automatic transmission by providing different clutches for odd and even speed selector gears. When changing gear, the engine torque is transferred from one gear to the other continuously, so providing gentle, smooth gear changes without either losing power or jerking the vehicle. Gear selection may be manual, automatic (depending on throttle/speed sensors), or a 'sports' version combining both options. Continuously variable[edit] Main article: Continuously variable transmission The continuously variable transmission (CVT) is a transmission in which the ratio of the rotational speeds of two shafts, as the input shaft and output shaft of a vehicle or other machine, can be varied continuously within a given range, providing an infinite number of possible ratios. The CVT allows the driver or a computer to select the relationship between the speed of the engine and the speed of the wheels within a continuous range. This can provide even better fuel economy if the engine constantly runs at a single speed. The transmission is, in theory, capable of a better user experience, without the rise and fall in speed of an engine, and the jerk felt when changing gears poorly. CVTs are increasingly found on small cars, and especially high-gas-mileage or hybrid vehicles. On these platforms, the torque is limited because the electric motor can provide torque without changing the speed of the engine. By leaving the engine running at the rate that generates the best gas mileage for the given operating conditions, overall mileage can be improved over a system with a smaller number of fixed gears, where the system may be operating at peak efficiency only for a small range of speeds. CVTs are also found in agricultural equipment; due to the high-torque nature of these vehicles, mechanical gears are integrated to provide tractive force at high speeds. The system is similar to that of a hydrostatic gearbox, and at 'inching speeds' relies entirely on hydrostatic drive. German tractor manufacturer Fendt pioneered the technology, developing its 'Vario [1]' transmission. Infinitely variable[edit] The IVT is a specific type of CVT that includes not only an infinite number of gear ratios, but an "infinite" range as well. This is a turn of phrase, it actually refers to CVTs that are able to include a "zero ratio", where the input shaft can turn without any motion of the output shaft while remaining in gear. Of course, the gear ratio in that case is not "infinite" but is instead "undefined". Most (if not all) IVTs result from the combination of a CVT with an epicyclic gear system with a fixed ratio. The combination of the fixed ratio of the epicyclic gear with a specific matching ratio in the CVT side results in zero output. For instance, consider a transmission with an epicyclic gear set to 1:−1 gear ratio; a 1:1 reverse gear. When the CVT side is set to 1:1 the two ratios add up to zero output. The IVT is always engaged, even during its zero output. When the CVT is set to higher values it operates conventionally, with increasing forward ratios. In practice, the epicyclic gear may be set to the lowest possible ratio of the CVT, if reversing is not needed or is handled through other means. Reversing can be incorporated by setting the epicyclic gear ratio somewhat higher than the lowest ratio of the CVT, providing a range of reverse ratios. Electric variable[edit] The Electric Variable Transmission (EVT) combines a transmission with an electric motor to provide the illusion of a single CVT. In the common implementation, a gasoline engine is connected to a traditional transmission, which is in turn connected to an epicyclic gear system's planet carrier. An electric motor/generator is connected to the central "sun" gear, which is normally un-driven in typical epicyclic systems. Both sources of power can be fed into the transmission's output at the same time, splitting power between them. In common examples, between one-quarter and half of the engine's power can be fed into the sun gear. Depending on the implementation, the transmission in front of the epicyclic system may be greatly simplified, or eliminated completely. EVTs are capable of continuously modulating output/input speed ratios like mechanical CVTs, but offer the distinct benefit of being able to also apply power from two different sources to one output, as well as potentially reducing overall complexity dramatically. In typical implementations, the gear ratio of the transmission and epicyclic system are set to the ratio of the common driving conditions, say highway speed for a car, or city speeds for a bus. When the drivers presses on the gas, the associated electronics interprets the pedal position and immediately sets the gasoline engine to the RPM that provides the best gas mileage for that setting. As the gear ratio is normally set far from the maximum torque point, this set-up would normally result in very poor acceleration. Unlike gasoline engines, electric motors offer efficient torque across a wide selection of RPM, and are especially effective at low settings where the gasoline engine is inefficient. By varying the electrical load or supply on the motor attached to the sun gear, additional torque can be provided to make up for the low torque output from the engine. As the vehicle accelerates, the power to the motor is reduced and eventually ended, providing the illusion of a CVT. The canonical example of the EVT is Toyota's Hybrid Synergy Drive. This implementation has no conventional transmission, and the sun gear always receives 28% of the torque from the engine. This power can be used to operate any electrical loads in the vehicle, recharging the batteries, powering the entertainment system, or running the air conditioning. Any residual power is then fed back into a second motor that powers the output of the drivetrain directly. At highway speeds this additional generator/motor pathway is less efficient than simply powering the wheels directly. However, during acceleration, the electrical path is much more efficient than engine operating so far from its torque point.[17] GM uses a similar system in the Allison Bus hybrid powertrains and the Tahoe and Yukon pick-up trucks, but these use a two-speed transmission in front of the epicyclic system, and the sun gear receives close to half the total power. Non-direct[edit] Electric[edit] Main article: Diesel-electric transmission Electric transmissions convert the mechanical power of the engine(s) to electricity with electric generators and convert it back to mechanical power with electric motors. Electrical or electronic adjustable-speed drive control systems are used to control the speed and torque of the motors. If the generators are driven by turbines, such arrangements are called turbo-electric transmission. Likewise installations powered by diesel-engines are called diesel-electric. Diesel-electric arrangements are used on many railway locomotives, ships, large mining trucks, and some bulldozers. In these cases, each driven wheel is equipped with its own electric motor, which can be fed varying electrical power to provide any required torque or power output for each wheel independently. This produces a much simpler solution for multiple driven wheels in very large vehicles, where drive shafts would be much larger or heavier than the electrical cable that can provide the same amount of power. It also improves the ability to allow different wheels to run at different speeds, which is useful for steered wheels in large construction vehicles. Hydrostatic[edit] See also Continuously variable transmission > Hydrostatic CVTs Hydrostatic transmissions transmit all power hydraulically, using the components of hydraulic machinery. They are similar to electrical transmissions, but hydraulic fluid as the power distribution system rather than electricity. The transmission input drive is a central hydraulic pump and final drive unit(s) is/are a hydraulic motor, or hydraulic cylinder (see: swashplate). Both components can be placed physically far apart on the machine, being connected only by flexible hoses. Hydrostatic drive systems are used on excavators, lawn tractors, forklifts, winch drive systems, heavy lift equipment, agricultural machinery, earth-moving equipment, etc. An arrangement for motor-vehicle transmission was probably used on the Ferguson F-1 P99 racing car in about 1961. The Human Friendly Transmission of the Honda DN-01 is hydrostatic. Hydrodynamic[edit] If the hydraulic pump and/or hydraulic motor make use of the hydrodynamic effects of the fluid flow, i.e. pressure due to a change in the fluid's momentum as it flows through vanes in a turbine. The pump and motor usually consist of rotating vanes without seals and are typically placed in close proximity. The transmission ratio can be made to vary by means of additional rotating vanes, an effect similar to varying the pitch of an airplane propeller. The torque converter in most automotive automatic transmissions is, in itself, a hydrodynamic transmission. Hydrodynamic transmissions are used in many passenger rail vehicles, those that are not using electrical transmissions. In this application the advantage of smooth power delivery may outweigh the reduced efficiency caused by turbulence energy losses in the fluid. See also[edit] Chain drive Epicyclic gearing Clutch Hydraulic transmission Manual transmission Motorcycle transmission Transfer case Notes[edit] Jump up ^ (In American English, a gearbox can be any housing containing a gear train, even just one pair of bevel gears; a transmission is a type of gearbox that can be "shifted" to dynamically change the speed-torque ratio such as in a vehicle; and automatic transmissions are usually called by that name only, although manual transmissions are often called gearboxes). References[edit] Jump up ^ "Merriam-Webster definition of '''transmission'''". Merriam-webster.com. 2012-08-31. Retrieved 2014-04-29. Jump up ^ J. J. Uicker; G. R. Pennock; J. E. Shigley (2003). Theory of Machines and Mechanisms (3rd ed.). New York: Oxford University Press. ISBN 9780195155983. Jump up ^ B. Paul (1979). Kinematics and Dynamics of Planar Machinery. Prentice Hall. Jump up ^ Stiesdal, Henrik (August 1999), The wind turbine: Components and operation, retrieved 2009-10-06 Jump up ^ Musial, W.; Butterfield, S.; McNiff, B. (May 2007), Improving Wind TurbineGearbox Reliability, National Renewable Energy Laboratory, retrieved July 2, 2013 Jump up ^ "Experts predict nine-, 10-speed transmissions to dominate in North America". Autoweek. May 13, 2013. Jump up ^ "Ford, GM work together on new nine-, 10-speed transmissions". Autoweek. April 15, 2013. Jump up ^ "Practical Driving Test FAQs". Dvtani.gov.uk. 2009-10-04. Retrieved 2014-04-29. Jump up ^ "Victorian restrictions on probationary drivers". Vicroads.vic.gov.au. 2014-01-14. Retrieved 2014-04-29. Jump up ^ "Transportlīdzekļu vadītāja tiesību iegūšanas un atjaunošanas kārtība un vadītāja apliecības izsniegšanas, apmaiņas, atjaunošanas un iznīcināšanas kārtība" (in Latvian). Likumi.lv. Retrieved 2014-04-29. Jump up ^ "2013 Subaru Impreza Wagon AWD". http://www.fueleconomy.gov. Retrieved No
|
|
#
?
Mar 29, 2015 08:05
|
|
|
goons in E/N posted:Child rape isn't that bad. The real crime is misgendering
|
|
#
?
Mar 29, 2015 08:09
|
|
|
yeesh
|
|
#
?
Mar 29, 2015 08:20
|
|
|
Transgender people are not exclusive to the first world and it's pretty dumb to say or think so.
|
|
#
?
Mar 29, 2015 10:14
|
|
|
LeoMarr posted:dide o ficlomg ;pve a trasm,ossopm SAME
|
|
#
?
Mar 29, 2015 10:16
|
|
|
People believe that trans people are a first world thing because they don't actually know anything about other people's cultures or their own for that matter. They're just making an assumption that further justifies their rhetoric. There are lots of impoverished trans third worlders.
|
|
#
?
Mar 29, 2015 10:16
|
|
|
psyopmonkey posted:Thats not very nice. im getting tons of mileage from my lovely photoshop skills 
|
|
#
?
Mar 29, 2015 10:18
|
|
|
Psyopmonkey please stop cavorting around with that loser you can do way better
|
|
#
?
Mar 29, 2015 10:20
|
|
|
psyopmonkey posted:Well, I think that... no you loving dont
|
|
#
?
Mar 29, 2015 10:21
|
|
|
When every man, woman, and child can transform into a super hot babe, the world will know equality.
|
|
#
?
Mar 29, 2015 10:27
|
|
|
i have transpired
|
|
#
?
Mar 29, 2015 10:27
|
|
|
if you ignore them they go away?
|
|
#
?
Mar 29, 2015 10:49
|
|
|
i dont dislike transpeople but i've unironically never met one that wasn't at least a little weird in an undesirable way (i mean, aside from the given abnormality of being trans) and by proxy that makes it easier to simply not deal w/ them if I have the choice between doing so and not
|
|
#
?
Mar 29, 2015 10:58
|
|
|
psyopmonkey posted:Thats not very nice. A good way to ensure this happens is to not post pictures of yourself making stupid faces all over gbs for years
|
|
#
?
Mar 29, 2015 11:16
|
|
|
|
| # ? Apr 25, 2024 18:33 |
|
|
Sometimes I put makeup on and tuck my weiner back and dance around a little
|
|
#
?
Mar 29, 2015 11:18
|
|