|
You can get a cheap windows 7 key, and use that to activate windows 10, just in case anyone wants a cheap os.
|
# ¿ May 24, 2016 17:52 |
|
|
# ¿ Apr 28, 2024 10:49 |
|
knox_harrington posted:I'm planning on this for my thin-ITX build, do you know if a Windows 7 Pro gives a Windows 10 Pro activation MS say yes, should work fine.
|
# ¿ May 24, 2016 22:55 |
|
I've read that the thermaltake core x1 can fit a 400mm rad in the top, does anyone have any experience of this?
|
# ¿ Jun 3, 2016 17:55 |
|
buffbus posted:I have that case and have not tried a rad that big but I very much doubt it. The case is nearly a perfect cube and if you look up some pictures of it, that front fan is a 200mm and occupies much of the width. A 200x200 could probably fit on the top or front with a little custom work but not a 200x400. How are you liking the case? GRINDCORE MEGGIDO fucked around with this message at 08:21 on Jun 5, 2016 |
# ¿ Jun 4, 2016 02:55 |
|
NihilCredo posted:Then you have the Core V1, same as I do, where indeed a 400mm radiator isn't going to fit anywhere. Even to fit a 240mm you'd need to mod it (it's great for 140 or 120mm ones, though). Yep that's it. It can fit 2 x 200mm fans at the top, but I was wondering if the additional size of the rad would be a problem. Looking at measurements for it, I think a 200 x 400mm rad should fit.
|
# ¿ Jun 5, 2016 04:27 |
|
Water cooling is great if you go big and overclock a lot. For plain quiet, you can do better with air.
|
# ¿ Jun 16, 2016 00:27 |
|
I'm impressed with the Asus z170i pro gaming board. No problems running ddr4 at 4000, it's reasonably cheap, and seems happy running my 6600k at decent clocks (4.5 right now). Plus it has 3 fan headers, and bios options to switch fans off if the systems temperature is low enough. So my box is 100% silent while idling and surfing. The only slight fly in the ointment is the Atheros wireless card is not great. I just used one for a mitx build intended for vr and work, and would recommend it. GRINDCORE MEGGIDO fucked around with this message at 07:24 on Jun 25, 2016 |
# ¿ Jun 25, 2016 07:20 |
|
Coming from a sandy bridge - there's a lot of overclock options... I ended up using xmp settings to start with, with adaptive vcore. Trying normal offset it overvolted it by quite a bit but adaptive did what it was told. It does seem very overvolt happy so watch out for auto settings, ie user agent voltage and vccio. E- stay away from prime 95 also modern BIOS 's can get off my lawn. I had the asrock board as my number one, mostly because of the success of memory overclocks.... so I was happy to get this stable at ddr4000 so I didn't regret it(!). I did at first until I got it down. Both great boards I think. GRINDCORE MEGGIDO fucked around with this message at 16:22 on Jun 25, 2016 |
# ¿ Jun 25, 2016 16:16 |
|
Sri.Theo posted:You might be a bit hosed by the pound crashing, things are already increasing in price. I'm really glad my new PC arrived a couple of days before brexit. Those stupid fuckers.
|
# ¿ Jul 9, 2016 18:51 |
|
I've honestly never considered cutting down a graphics card to fit a case (I can understand totally removing the shroud, if its just decorative) and losing the warranty and resale value, when I could have instead chosen a different card or a fractionally larger case. Is it really a thing? GRINDCORE MEGGIDO fucked around with this message at 16:29 on Jul 23, 2016 |
# ¿ Jul 23, 2016 16:26 |
|
Trip report on the core x1 - it's way too big for sff goons to like it, but it's vented enough that my CPU / psu and graphics card fans only switch on when it's loaded, and the mobo is horizontal.
|
# ¿ Aug 7, 2016 03:43 |
|
Scott Forstall posted:I also really like the thermaltake core v1, but it has a window and I think windows on cases are dumb af. Yea, it's a shame they don't sell a mesh panel to replace the window on that. I hate them too. They do sell them for some other cases.
|
# ¿ Aug 7, 2016 14:54 |
|
Palladium posted:That's only if you assume most people are intelligent enough to do actual research instead of falling for the "OMG ITX it muz be gud" memetic marketing. I bought it because I had a mitx board in a m itx Lian li case, a 400mm rad, some 200mm fans, and a bunch of hard drives. I probably won't bother with the rad after realising how quiet good air cooling is, though.
|
# ¿ Aug 9, 2016 07:44 |
|
snuff posted:My Mini-ITX build I have the same board and chip. Have you tried clocking using adaptive vcore / with the UA and VCCIO set to something sensible, like 1.15 v or so? At default, mine wouldn't clock at all either without excessive heat until I set those three voltages. My settings for this averageish chip are 4.4Ghz, LLC level 4, adaptive voltage @ 1.28V, user agent / VCCIO @ 1.2v (for 3733 Ram). It indicates around 1.26V vcore when loaded. quote:The Core V1 does have filtered intake though, it has a gigantic foam filter for the 200mm fan. GRINDCORE MEGGIDO fucked around with this message at 16:33 on Aug 9, 2016 |
# ¿ Aug 9, 2016 16:11 |
|
Cinara posted:If anyone is using a non-modular PSU with an ITX build I feel very very sorry for them. Oh I don't know, a non modular PSU with modded cables + extra cables removed should take up even less space.
|
# ¿ Feb 28, 2017 09:28 |
|
On modular supplies, the plugs generally take up some space. We're not talking about adding sockets + cable plugs to them.
GRINDCORE MEGGIDO fucked around with this message at 14:54 on Feb 28, 2017 |
# ¿ Feb 28, 2017 14:43 |
|
If it's at stock clocks, would be worth undervolting it.
|
# ¿ Mar 6, 2017 03:33 |
|
Thermaltake core series maybe worth a look. They are cheap, have reasonable to brilliant fan options, build quality is only reasonable, but they hold up well. I like well ventilated cases.
|
# ¿ Mar 8, 2017 22:42 |
|
The core v1 supports heatsinks up to 140mm in height. I'm sure there some good ones that size. I wish they made a Core X0.5 with the same top panel radiator options but shorter. GRINDCORE MEGGIDO fucked around with this message at 02:55 on Mar 9, 2017 |
# ¿ Mar 9, 2017 02:42 |
|
Someone mentioned a while ago about the nzxt h200. Mine arrived today, I'm impressed with it a lot. It's a fully sick case for the money, and building in it is absolute cake.
|
# ¿ Jul 12, 2018 04:18 |
|
Front panel is a bastard to get off, isn't it? Hah you put a 1080 in it. Nice. I also used an evga supernova 850, that's passive until it draws ~420w or so, which it won't. I like the cutout behind the motherboard, I can get to the m2 drive without pulling the board out. I can't use it yet, lol. My 2700x doesn't arrive until Monday. GRINDCORE MEGGIDO fucked around with this message at 04:03 on Jul 16, 2018 |
# ¿ Jul 12, 2018 12:39 |
|
SalTheBard posted:If I didn't have a 3.5inch 4tb HDD at the bottom of my case I would totally get some cable extensions like those. I think they are beautiful looking. You can get braided coloured cables made for some psus, straight swap if they're modular.
|
# ¿ Jul 13, 2018 02:18 |
|
Itx: removing the graphics card to reset the CMOS. (No back panel reset button sucks Asrock, you cheap bastards) I bought 3 jumper cables and made the bios reset remote. Heres my h200. The be quiet aio is excellent. GRINDCORE MEGGIDO fucked around with this message at 14:35 on Sep 15, 2018 |
# ¿ Jul 18, 2018 19:06 |
|
Sup! this is the h200 without RGB. I only want the Red blinkenlights of the Fury. Motherboard temps sit at around 40C, CPU idle is 28C - about 65C loaded. This is a 2700x. It was hotter before I added the top exhaust fan with no filter. Both exhaust fans sit around 900rpm. I'm using an EVGA P2 850 ATX Psu. Unfortunately I can't fit the tubes behind the Red vanity bar. I'll get some short Red braided replacement PSU cables soon for it, like yours. GRINDCORE MEGGIDO fucked around with this message at 09:51 on Jul 27, 2018 |
# ¿ Jul 18, 2018 20:51 |
|
SalTheBard posted:Yep! I got a coupon with my motherboard for 20% of cable mod cables. Totally ideal for MITX. I had to run 2 x 8 pin VGA power cables and getting them to fit was a bitch. Many cable ties gave their lives But with these, can choose the length and they're flexible. https://store.cablemod.com/configurator/ GRINDCORE MEGGIDO fucked around with this message at 23:27 on Jul 18, 2018 |
# ¿ Jul 18, 2018 23:24 |
|
Any recommendations for a small itx, suitable for a 2400G? No windows or much plastic. It's for use at work. Maybe a SG13B? They're cheap and can reuse a spare Atx psu. GRINDCORE MEGGIDO fucked around with this message at 10:32 on Oct 28, 2018 |
# ¿ Oct 28, 2018 10:29 |
|
VulgarandStupid posted:https://www.amazon.com/WIN-150W-Mini-ITX-Black-BQ656T-AD150TB3/dp/B01LVV6WVU I've been looking at those. I had an old inwin case years ago and the build quality was great. I guess reusing an old Atx psu isn't as important as size. Thank you!
|
# ¿ Oct 28, 2018 11:05 |
|
Thinking about building a small computer I can use in the office at work. 2400g w/ stealth cooler Streacom F1C Evo WS Black ASRock AMD B450 ITX 970 evo 500GB 120W nanoPSU and AC/DC adapter block (Streacom) That look like it'll work? I've got 2x4GB of DDR4 already. The stealth cooler is the max height that fits that case. I wonder how much clearance it has between the top of the fan and the case top panel. I may use a Noctua low profile cooler instead. I just want a machine I can code on with a few browser windows open and basic poo poo like FTP clients. The APU should handle basic gaming OK, for the nights I'm in a hotel. GRINDCORE MEGGIDO fucked around with this message at 17:45 on Nov 4, 2018 |
# ¿ Nov 4, 2018 17:43 |
|
Wonder what the chance is of it hitting that speed. Might have less problem with flare x @c14 3200 for ryzen. But I'd check benchmarks for that game at the chosen Res before choosing a CPU. GRINDCORE MEGGIDO fucked around with this message at 02:23 on Nov 5, 2018 |
# ¿ Nov 5, 2018 02:19 |
|
Streacom da2 will 100% be in my future. Looks like a really nice case.
|
# ¿ Nov 5, 2018 23:30 |
|
buglord posted:The faux-Mac look of it is slick. That's probably where i'm going next, because the CPU cooler restrictions of the SG13 are being felt with my non-k i7 8700. I'm going to put my 2700x into it, with air cooling. And a water cooled gpu with a 140mm rad, if there's enough clearance with an Atx psu. The mounting system looks neat. Super flexible.
|
# ¿ Nov 7, 2018 01:49 |
|
What's the best air cooler, at or below 145mm height? Cryorig h7 plus? It's for a 2700x in a streacom da2. GRINDCORE MEGGIDO fucked around with this message at 22:37 on Feb 17, 2019 |
# ¿ Feb 17, 2019 22:29 |
|
HalloKitty posted:I can see the Streacom DA2 has a side panel with holes... a Noctua NH-C14S might be a good fit - pulling cold air directly from the side down onto the CPU Good call. That'll do it, ordered. Thank you!
|
# ¿ Feb 19, 2019 20:10 |
|
Volguus posted:Quick question about NZXT - H200 (White) Mini ITX Tower Case : what's with the white bar in the case? What's the purpose for it? I've seen it in a few cases, never had one myself. Is it just for show or does it have an actual practical purpose? Bling They're nice cases. I wish there was a mesh side panel.
|
# ¿ Apr 12, 2019 00:14 |
|
It'd support it fine, it's quite well secured.
|
# ¿ Apr 12, 2019 00:35 |
|
Streacom da2 review: Remove the fan filters, and it runs cool. Liberatingly easy to build in/ upgrade for a 20L case. 2700x and a U9S, MSI 2060 Gaming Z run at 60 / 65C loaded, with passive idle. Very quiet. I love it. GRINDCORE MEGGIDO fucked around with this message at 23:52 on May 23, 2019 |
# ¿ May 21, 2019 10:03 |
|
buglord posted:just saw this while on instagram. Unf
|
# ¿ May 28, 2019 09:01 |
|
JBark posted:I'm going to give the Hunter Duet a try pretty soon in my old Shuttle SZ77R5 case. It's about the only dual block AIO I've run across that will actually fit in a smaller case. No way it will handle high-end stuff with a massive overclock, but I'm planning on a 3700x to go with my 1070, and it should easily handle that, especially since I don't plan on overclocking. I really want to see that build.
|
# ¿ May 29, 2019 00:38 |
|
If anyone can help me find a specific discontinued case for sale, I'd appreciate it a ton. Cooltek w1 black no window. Also listed as Rosewill legacy w1 Jonsbro w1 Think there's no stock left anywhere, but goons do the impossible sometimes.
|
# ¿ Jul 7, 2019 16:39 |
|
|
# ¿ Apr 28, 2024 10:49 |
|
Rexxed posted:The only listing I could find that might be in stock is in Hanoi, VN. Also due to using google translate on the page I can't say if they have any for sure. I doubt they ship internationally but hey: Thank you. I'll message them.
|
# ¿ Jul 7, 2019 21:22 |