|
TraderStav posted:Many will disagree due to vendor lock-in and cost, but I went with UniFi and have absolutely loved their solution. What vendor lock in? I have their APs only and run the controller on a VM of my ESXi box. They're great and the price is right for enterprisy-ish stuff for SOHO. No issues with multiple SSIDs on multiple VLANs, handoff between APs, etc. It all just works seamlessly with the rest of the definitely not Ubiquiti switches and router.
|
# ? Feb 1, 2024 19:32 |
|
|
# ? Apr 29, 2024 15:07 |
|
Motronic posted:What vendor lock in? I have their APs only and run the controller on a VM of my ESXi box. They're great and the price is right for enterprisy-ish stuff for SOHO. No issues with multiple SSIDs on multiple VLANs, handoff between APs, etc. It all just works seamlessly with the rest of the definitely not Ubiquiti switches and router. I'm sorry, I maybe need to re-read the original message. I thought it was regarding NVR and camera solutions. I was speaking about the UniFi branded cameras specifically, none of the networking stuff.
|
# ? Feb 1, 2024 19:36 |
|
TraderStav posted:I'm sorry, I maybe need to re-read the original message. I thought it was regarding NVR and camera solutions. I was speaking about the UniFi branded cameras specifically, none of the networking stuff. Oh, you're right....I lost context switching between threads. In any case, their cameras work with anything as well (they can do an RTSP stream). And I believe their NVR can record RTSP streams, making it so any generic camera should work too.
|
# ? Feb 1, 2024 19:45 |
|
Motronic posted:Oh, you're right....I lost context switching between threads. In any case, their cameras work with anything as well (they can do an RTSP stream). And I believe their NVR can record RTSP streams, making it so any generic camera should work too. That's great to know, although I haven't felt the need to look at other NVRs or Cameras. Thanks for the correction.
|
# ? Feb 1, 2024 19:56 |
|
All my network stuff is unifi and I would gladly do their camera but $$ and honestly I don't really neeeeed it. But messing around with some cheap Wyze cams sounds good. csammis posted:I use https://github.com/mrlt8/docker-wyze-bridge for my Wyze 3 camera, works fine and the developer was very responsive when I was working on adding Wyze pan/tilt controls to Home Assistant a year ago Oh I never considered home assistant, always wanted to install it to see what it does. I read that docker bridge doesn't actually stop all the traffic from going to Wyze, is that true?
|
# ? Feb 1, 2024 20:01 |
|
I run Unifi as well and will never go back. My only irritation is their lack of 2.5/5/10GB networking gear for their low-mid level routers and switches, outside their Aggregation switches. I really want a Unifi Router with at least 1-2 10GB SFPs that isn't crazy expensive. CommieGIR fucked around with this message at 16:05 on Feb 2, 2024 |
# ? Feb 2, 2024 15:58 |
|
is there a self hosting mdm that can be setup for kids devices? im trying to figure out how to do web filtering on a mobile device that works on LTE
|
# ? Feb 2, 2024 22:08 |
|
Problem is my cheap setup at home for sharing peripherals/monitors might have me screwed. I have a gaming PC with dual monitors at home and my partner needs to use her work laptop at the same desk, so rather than purchasing an actual KVM switch, I just ended up getting a simple USB 3 peripheral switch (for keyboard/mouse/headset/microphone) and then setup a x2 HDMI to USB3 adapter into the secondary HDMI-out for each monitor. It works fairly well because after hitting the USB peripheral switch my monitor is pretty good at autodetecting the other display and generally switches to it (and if it doesnt its easy to switch on the monitor itself anyways). Neither of us work "between" both machines (i.e. she logs out end of day then I go use my PC) so never ran into any issues with needing faster switching or anything. But, now I got the mini-PC, but I really don't want to have to invest in a real KVM switch to share peripherals / monitors across the three machines. I have like an visceral aversion to any sort of cable management and testing peripherals so if I can avoid that it would be really great. Could I setup some kind of remote desktop hardlinked or over local network instead? Essentially access the server-PC as if it was a virtual machine setup on my gaming-PC? What are the drawbacks with this setup? edit: okay I'm obviously very confused. I've been planning my jellyfin setup as if it was another PC or server that I'd be installing Ubuntu on and spinning up docker containers for jellyfin or whatever. But, is something like TrueNAS or UnRaid what I actually should be looking at for my use-case? I.E. is it really that simple that if I install TrueNAS on the mini-PC I can access it remotely through my workstation PC? Or is TrueNAS just like any other OS and I have to setup a remote desktop situation? edit: im dumb, ive just been thinking about this all wrong. I'm setting up a NAS, I dont need to worry about peripherals. Oysters Autobio fucked around with this message at 16:25 on Feb 3, 2024 |
# ? Feb 3, 2024 15:47 |
|
Generally speaking most servers are administered remotely via SSH or a web interface so you shouldn't need to have it connected to a K+M outside of initial setup or if something goes horrible wrong. No real issue going Ubuntu or TrueNAS, the latter provides a nice web interface out of the box to do everything from so you'll probably find this easier. Plenty of guides around for both for Jellyfin etc.
|
# ? Feb 3, 2024 16:17 |
|
Yeah ignore my last post, it just dawned on me that I was approaching this whole thing as if this was just another PC I would switch peripherals on to operate on. Is a NAS literally just a machine with booted up specialty OS thats designed natively for media sharing and remote operation? Oysters Autobio fucked around with this message at 16:29 on Feb 3, 2024 |
# ? Feb 3, 2024 16:24 |
Oysters Autobio posted:Yeah ignore my last post, it just dawned on me that I was approaching this whole thing as if this was just another PC I would switch peripherals on to operate on. "Specialty OS" is optional but not mandatory, many of the mainstream OS's could be used to run a NAS as well. Some of the specialty ones focus around either optimization for minimal hardware requirements, or for utilization of random stacks of drives like Unraid. At its heart the bare minimum for a NAS would be to run a storage drive or drives, attach to a network and function as an accessible drive to other devices. Some people have their NAS just doing this function only, which is nice for very minimal power / lower hardware requirements. Others, because this is a device you will typically always leave on, use the NAS as a home server for other uses as well through things like having it run a separate VM, or using dockers etc to run other functions and services.
|
|
# ? Feb 3, 2024 16:38 |
|
Ya just on all the time serving files and apps. Some trying to look cute.
|
# ? Feb 3, 2024 16:42 |
|
At minimum anything with storage you can access via SMB or NFS or whatever. You can roll your own easily but the more purpose built OSs have the kinks worked out and often have nice quality of life features so you’re not having to go in and futz about nearly as often.
|
# ? Feb 3, 2024 17:21 |
|
I run trillium for notes but I've never really loved it. I saw notion in the play store and just from the screenshots it looks awesome. After some digging it looks like the most similar things I can self host are Appflowy https://github.com/AppFlowy-IO/AppFlowy Outline https://github.com/outline/outline Anytype https://tech.anytype.io/how-to/self-hosting Anyone got any experience with em?
|
# ? Feb 3, 2024 17:26 |
|
Resdfru posted:I run trillium for notes but I've never really loved it. I saw notion in the play store and just from the screenshots it looks awesome. After some digging it looks like the most similar things I can self host are There's a low volume thread about notes. https://forums.somethingawful.com/showthread.php?threadid=3990615 I'm personally part of the Obsidian cult. Electron client with local markdown files that you then sync to other locally held obsidian instances. I run a copy in a docker container with vnc in case I really don't have access to my desktop, my mac, my ipad, my iphone, etc...
|
# ? Feb 3, 2024 18:45 |
|
Notion is too close system for my liking. I have also joined the Obsidian camp, but if you stick with any that supports .md then you can easily transfer to any solution.
|
# ? Feb 3, 2024 19:44 |
|
Yea, same with notion. Looks cool but I don't wanna be locked into anyone else's thing. I just looked into those 3 things I posted and I'm too lazy for that. I'll try obsidian and see how it goes
|
# ? Feb 3, 2024 19:53 |
|
Resdfru posted:I run trillium for notes but I've never really loved it. I saw notion in the play store and just from the screenshots it looks awesome. After some digging it looks like the most similar things I can self host are There's Joplin as well (you can self-host the sync server)
|
# ? Feb 3, 2024 20:31 |
Tamba posted:There's Joplin as well (you can self-host the sync server) You can also just use any existing webdav server for your sync too. I use my nextcloud instance to sync my joplin clients and it works great. No additional service required.
|
|
# ? Feb 3, 2024 20:55 |
|
Obsidian is great barring the face you can’t really sync your poo poo to your infra if you’re using a phone or iPad at any point. That said, you sure can just rsync it out of iCloud if you’re using a Mac laptop or the like. I think you can do some git nonsense as well but I never got around to looking into it.
|
# ? Feb 4, 2024 04:22 |
|
From what I've read (really quick Google search) this should work on ios https://github.com/vrtmrz/obsidian-livesync I installed it earlier but haven't had a chance to try it out yet
|
# ? Feb 4, 2024 04:36 |
|
That looks really interesting. Not sure if it's interesting enough to expose a DB on my network to the internet writ large but still interesting. I'm a bit surprised they didn't just use postgres or the like, I've never heard of CouchDB before.
|
# ? Feb 4, 2024 05:42 |
|
Warbird posted:That looks really interesting. Not sure if it's interesting enough to expose a DB on my network to the internet writ large but still interesting. I'm a bit surprised they didn't just use postgres or the like, I've never heard of CouchDB before. I just have my phone connected via VPN to my home network at all times. Also another vouch for livesync, works great for me.
|
# ? Feb 4, 2024 11:02 |
|
Yea i use tailscale, nothing on my network is exposed. I finally got live sync working last night. Spent like an hour troubleshooting my reverse proxy and couchdb thinking I did something wrong. But the problem was that I thought in the live sync config where it said to put database name and it said it will create it if it doesn't exist I misinterpreted that as leave it blank to get a random one. So yea I put a dB name and everything worked. Loloops It's great though, does exactly what it says it will.
|
# ? Feb 4, 2024 16:17 |
|
Quick portainer syntax question. I have a directory on my NAS with two words in the name. Portainer seems to be having difficulty with mounting this for my Plex docker despite trying a few things I've googled to get the spaces in with ASCII/etc. What is the correct way to do this? For context, the Plex is hosted on a NUC and has mounted the drives from my NAS on my Unraid machine in /media as shown below. All of them work properly when accessing through the terminal and as you can see for some that have two words in the name I mounted them with underscores to get around this. The 'Family Videos' in question is a subdirectory so I cannot change the path for that.
|
# ? Feb 4, 2024 16:55 |
|
Hm. This actually brushed up against something I’ve been meaning to finally learn how to do for a bit now but don’t fully understand. My LAN has something like a couple dozen services sitting behind a reverse proxy with 99% of them restricted to intranet only access via Access Control Profiles. That lets me use DNS names and have real SSL (not necessary, I know, but I like not being bothered by the browser’s complaining) on local services while keeping them off the internet writ large. Two of those services are WireGuard servers (one on the router, one on a RasPi off somewhere for redundancy’s sake and the router’s server software being eeh). Despite having left the VPN on at times and forgetting without a noticeable degradation of performance, I don’t really want to have it always on for everything when out and would prefer the service specific apps I have to just use a VPN tunnel in and everything else stay free range. My understanding is that you can achieve this sort of thing via split tunneling. Is that on the money? E: ^^^^^ Iirc the way to go about this is code:
Warbird fucked around with this message at 17:00 on Feb 4, 2024 |
# ? Feb 4, 2024 16:58 |
|
I haven't used portainer much but generally you would wrap the entire path in quotes or you can try escaping the spaces with backslashes Yea split tunneling is how you would make it so only VPN specific traffic uses the VPN. I believe tailscale (and possibly wire guard?) work that way by default unless you enable the use of an exit node Resdfru fucked around with this message at 17:04 on Feb 4, 2024 |
# ? Feb 4, 2024 17:02 |
|
Sorry to cross post but not quite sure yet where the media server / Plex megathread and the self host megathread discussion borders are at. Just wanted to crosspost my followup on what to do with a mistaken purchase for new NAS server setup. I figured because it's mainly hardware oriented that folks here might have other expertise/advice. See here edit: Can be ignored, looks like my choice has been made cause the used prebuild isnt working anyways so had to initiate refund. I'm going to take another poster's advice and do what I should've done from the start and just build this from an atx tower with cheaper parts. I won't get the small form factor which would be nice, but I'm not completely short of space where it makes sense given the cost difference with micro-ATX / mini-ITX. It gives me plenty of space to expand as well as flexibility in re-purposing older parts I might upgrade on my gaming PC (for example, already have 16GB RAM I could use). Oysters Autobio fucked around with this message at 02:05 on Feb 5, 2024 |
# ? Feb 4, 2024 18:14 |
Looking into tailscale/headscale some more. While I still don't need it for myself, I did discover this neat trick for linuxserver.io container images that lets you drop in the vpn into the container itself without the need for a whole new dockerfile and ci/cd pipline to publish a modified image. https://tailscale.dev/blog/docker-mod-tailscale Would be useful to join together specific containers to a vpn or join offsite hosted stuff together without altering the underlying host server.
|
|
# ? Feb 4, 2024 18:17 |
Oysters Autobio posted:A lot of struck through about NAS
|
|
# ? Feb 5, 2024 14:48 |
|
Bit of a long-shot, hoping to get some direction on how to resurrect this issue with dockers on my Unraid. I replaced a failing parity drive and upon reboot, all of my Dockers and VMs disappeared. I used the Previous Apps function to restore all my dockers and all of them fired back up with no concerns except Nextcloud/Swag/MariaDB. Originally was complaining about not being able to access the database, but that error went away. Seems as if my docker network wasn't preserved and after recreating the connection between Nextcloud/Swag it still does not work. Getting 404 on Nextcloud WebUI when accessing internally and 502 externally. Logs not showing much and all of the .conf files are preserved as they were before. I used the Spaceinvader One 2022 set up videos for this if that helps. I am at a loss for next steps or what to even google. Almost ready to nuke and re-set up Nextcloud from scratch again, but that is not a trivial thing with all the users/shares/etc. Thanks in advance for any help or direction!
|
# ? Feb 9, 2024 16:29 |
|
Why would a "parity drive" replacement cause anything to disappear? That sounds insane. Edit: In the interest of trying to be useful: you pretty much need to read logs to figure out what is going on. I don't think anyone will be able to help because there's too little info to work with. Are requests reaching the Nextcloud container or not? If not, it's a traffic routing issue. If traffic is coming through, then it's a Nextcloud issue. Personally, I'd start out with checking if Nextcloud has gone into maintenance mode. Keito fucked around with this message at 20:39 on Feb 9, 2024 |
# ? Feb 9, 2024 20:34 |
|
The differing error codes between internal and external makes me think you might have an incorrect routing configuration on whatever’s directing traffic to the containers (Traefik or nginx I’m guessing). 404 would be the equivalent of “I don’t know what you’re asking for” whereas 502 is “I’m trying to send you to that service but it’s not responding.” I’d start by looking at that part of the stack. Also check the NextCloud logs to see if it’s healthy and is getting any traffic, but the problem is likely before that point.
|
# ? Feb 10, 2024 00:08 |
There's a lot of stuff that could be wrong with that setup. Your database could have gotten disconnected from nextcloud and the nextcloud config file could be pointing to an internal docker network IP that no longer exists. Or there could be something in the config that is causing it to reboot over and over again. You really just need to look at the logs to see what is causing an issue.
|
|
# ? Feb 10, 2024 00:24 |
|
Thanks all for the responses and apologies for asking a question and going dark. The dockers and such disappearing after drive swap apparently happens enough that there's discussions on the unraid forums for it. I couldn't sort out the connection. I found that the biggest issue was the deletion of that docker network and no matter how many times I rebuilt and changed settings I just couldn't get nextcloud to boot up even internally. For what I use it for, I either don't understand how it all works well enough or it's too buggy to use going forward. I need reliability so just going back to Google drive for it. Separately, I'm having an issue with updating dockers on my NUC running Ubuntu that only hosts portainer and Plex. Got everything working perfect but when I stop Plex to update the container or make any other changes I get an Error 500 and cannot restart it. Rebooting the server it fires right back up so it's as if something with the port assignments or something are conflicting. I'm about to set up watchtower for auto updates but want to get it working manually before automating it. Google not really helping here. With such a straightforward and simple stack here, I am scratching my head. Any thoughts?
|
# ? Feb 16, 2024 19:40 |
Can you post your compose file (with any secrets you might have redacted of course)?
|
|
# ? Feb 16, 2024 19:47 |
|
TraderStav posted:Separately, I'm having an issue with updating dockers on my NUC running Ubuntu that only hosts portainer and Plex. Got everything working perfect but when I stop Plex to update the container or make any other changes I get an Error 500 and cannot restart it. Rebooting the server it fires right back up so it's as if something with the port assignments or something are conflicting. I'm about to set up watchtower for auto updates but want to get it working manually before automating it. Google not really helping here. Every time I've gotten a 500 from Portainer it was because the entrypoint. Duplicate/Edit, delete enterypoint field, deploy. May not be what you're running into, but it's probably worth a try.
|
# ? Feb 16, 2024 20:05 |
|
Motronic posted:Every time I've gotten a 500 from Portainer it was because the entrypoint. Duplicate/Edit, delete enterypoint field, deploy. May not be what you're running into, but it's probably worth a try. Yup, that did it! Thank you! Nitrousoxide posted:Can you post your compose file (with any secrets you might have redacted of course)? Where do I locate this in Portainer, been looking and cannot see where to find it. I like these solutions but they do obfuscate this kind of stuff and I want to understand it all more so I can really appreciate the full benefits of docker.
|
# ? Feb 16, 2024 20:15 |
|
What is everyone doing for their monitoring stacks? I realized the other day that I had been losing a docker host to OOM errors off and on for a bit now and usually not noticing for a bit because my Kuma instance was on that host as well. I’ve migrated my Grafana/Prometheus/Kuma stuff onto a different host VM and put memory limits on my container stacks, but I need to get an actual factual monitoring setup going. I really need to get visibility on the containers themselves, the container hosts, and some sort of log aggregation solution. That sounds like “Actually lean and use Grafana” and “Setup Loki” to me. Is that more or less in line?
|
# ? Feb 17, 2024 20:51 |
|
|
# ? Apr 29, 2024 15:07 |
|
Warbird posted:What is everyone doing for their monitoring stacks? I realized the other day that I had been losing a docker host to OOM errors off and on for a bit now and usually not noticing for a bit because my Kuma instance was on that host as well. I’ve migrated my Grafana/Prometheus/Kuma stuff onto a different host VM and put memory limits on my container stacks, but I need to get an actual factual monitoring setup going. For system and application monitoring, I use Telegraf feeding to InfluxDB with dashboards and such in Grafana. For log aggregation I have Graylog being fed from several inputs depending on the source:
|
# ? Feb 18, 2024 01:52 |