|
I couldn't find an appropriate thread for my question, so please oust me if I'm in the wrong place. What's the general consensus on where to get, and what kind of wallmount brackets to use for putting components in a closet? I have a closet fairly close to my TV that was just mounted and I wanted to get rid of everything. We use the closet for shoes (hence the need to have off the ground) and for coats and such also so want to position the components just right. Monoprice has some things, but they seem to be oriented around building a shelf into a TV mount. I have an Xbox360, HTPC (full atx case), Onkyo receiver, and a U-verse box.
|
# ? Aug 1, 2012 17:51 |
|
|
# ? Apr 19, 2024 23:17 |
|
Probably get a wall mount rack + shelves? Monoprice has cheap shelves, but their wall mount racks would be too small. Something like: Shelf ($18/ea): http://www.monoprice.com/products/product.asp?p_id=8629 Rack ($110): (can be assembled as 8u/12u/22u, your choice): http://www.newegg.com/Product/Product.aspx?Item=N82E16816228075 Edit: or spend a little more and get one that swivels away from the wall so you can access cabling easier. Will of course require more space when swiveling. This is what I have and it's convenient (I need to swap out that ghetto wooden shelf still) falz fucked around with this message at 18:06 on Aug 1, 2012 |
# ? Aug 1, 2012 18:00 |
|
TraderStav posted:I couldn't find an appropriate thread for my question, so please oust me if I'm in the wrong place. What's the general consensus on where to get, and what kind of wallmount brackets to use for putting components in a closet? I have a closet fairly close to my TV that was just mounted and I wanted to get rid of everything. We use the closet for shoes (hence the need to have off the ground) and for coats and such also so want to position the components just right. Monoprice has some things, but they seem to be oriented around building a shelf into a TV mount. I have an Xbox360, HTPC (full atx case), Onkyo receiver, and a U-verse box. What's your budget? Rack mount is the sexiest, but it's also expensive. e:beaten
|
# ? Aug 1, 2012 18:02 |
|
Legdiian posted:What's your budget? Rack mount is the sexiest, but it's also expensive. Good question, I'm in the scoping out phase at the moment. I was thinking of racks as it'd be a way to preserve the floor for shoes, as it is now, as well as the coats in the closet. There's the shelf that the coats hang from that could be used to stack the components, but will need to negotiate that with the wife first! Looking at the sizes of what I would need, I think I'm going to be hard pressed to find a solution for all 4 boxes that will work within my constraints. If there were simple shelves I could bolt right into the walls and position where I want, that'd be one thing but I'm not seeing that as a solution. I'm going to measure out that rack unit though, as I'd be willing to spend a couple hundred to do it right instead of getting a piece of furniture to hide it all in. Do the shelves that were link just bolt right into that rack? How many shelves can that rack support? Any best practices/products on IR transmitters? My receiver and cable box will need that for sure. I feel like I'd miss knowing what level the volume was at, in your experiences is that something you get over? I have all the audio passing through the TV and into the receiver, so the only function I use on it is on/off and volume.
|
# ? Aug 1, 2012 18:08 |
|
The monoprice shelves could also be directly screwed in to a wall. I wouldn't think they'd line up with 16" studs, you may have to attach plywood. paint it, then attach them. For IR, I just use these cheap X10 things. They work mostly OK. The reason I use those is because I already had some RCA versions of them and they were compatible. Monoprice has some stuff like this as well + wired IR. Volume has never been an issue for me, I rely on my ears for that. Some newer receivers will do OSD over HDMI output as well.
|
# ? Aug 1, 2012 18:15 |
|
falz posted:The monoprice shelves could also be directly screwed in to a wall. I wouldn't think they'd line up with 16" studs, you may have to attach plywood. paint it, then attach them. That's good to know, I'll do some measuring and see if that'll work. Putting some wood behind it wouldn't be an issue for me I don't think. I'll check out the IR options, wiring isn't a problem for me. Basement is right below and the closet can easily be accessed from down there also.
|
# ? Aug 1, 2012 18:24 |
|
falz posted:Probably get a wall mount rack + shelves? Monoprice has cheap shelves, but their wall mount racks would be too small. Something like:
|
# ? Aug 2, 2012 01:26 |
|
Can I put my Onkyo receiver on its side or does it have to sit horizontally?
|
# ? Aug 2, 2012 02:21 |
|
falz posted:Probably get a wall mount rack + shelves? Monoprice has cheap shelves, but their wall mount racks would be too small. Something like:
|
# ? Aug 2, 2012 04:09 |
|
Unsure the brand of the rack, I snagged it off of the wall of a company that went out of business a few years back. There's a few 50' HDMI runs (monoprice) and one is 65' or so using this hdmi extender which surprisingly works fine. That rack runs a few TVs. Looks like I missed the extender in the diagram below when I created it- oh well.
|
# ? Aug 2, 2012 04:19 |
|
TraderStav posted:Can I put my Onkyo receiver on its side or does it have to sit horizontally? I never tried, but I think it should work. There are no moving parts, right? Just make sure there is plenty of room for hot air to escape out the vents in the top.
|
# ? Aug 2, 2012 12:47 |
|
I have a boner. What's the "coupler"? Did you have to fiddle with your DTV box IR channels to not get interference from each other? And does your DTV box pass signal over HDMI and component simutaneously? (i.e. watch tv on basement projector and patio at the same time?)
|
# ? Aug 2, 2012 21:25 |
|
dreesemonkey posted:I have a boner. If I had to change something, I would swap out my 4x2 HDMI switch for the 4x4 HDMI switch and eliminate the component run and the 1x2 splitter. Since I have four sources and four TVs, I could watch any source on any TV, or all simultaneously (would be awesome for a Super Bowl party). The 4x2 splitter does allow the same features, just fewer outputs. I drew up that image to help me visualize how the hell to hook everything up. It definitely helped.
|
# ? Aug 2, 2012 21:42 |
|
All this is doing is making me want to re-wire my townhouse Thanks for the pictures and diagram falz
|
# ? Aug 2, 2012 22:22 |
|
falz posted:Yes, it outputs component and HDMI simultaneously. The coupler is this thing- I have no idea how it works, but it does work just fine. There's no IR issues, the DirecTV DVRs allow at least two (but maybe four?) unique IR "channels". Thanks for the explanation. I guess you need to have harmonies and IR repeaters in each location to be able to switch signals? That 4x4 switch is pretty awesome, I don't think I'd need something as complex as that but might as well for the price. I think the most helpful thing for me would be getting another satellite box so we could at least watch two separate things wherever we wanted in the house. Centralizing this stuff seems to make a lot of sense, plus it's freaking super cool!
|
# ? Aug 3, 2012 14:48 |
|
dreesemonkey posted:Thanks for the explanation. I guess you need to have harmonies and IR repeaters in each location to be able to switch signals? That 4x4 switch is pretty awesome, I don't think I'd need something as complex as that but might as well for the price. If you are thinking of going with the 4x4 HDMI switch, you can also control it via the serial port using a null modem cable and a computer.(I could never find a ir solution that actually worked.) Monoprice provides Windows software with the switch. However you need to make a custom cable for that to work. I made a website using asp and c# so I can switch inputs/ outputs from anywhere by using ios/android/laptop. If anyone is interested I could make a thread with my code and what is needed to get it up and running. ssspy007 fucked around with this message at 16:42 on Aug 3, 2012 |
# ? Aug 3, 2012 16:38 |
|
I'm in the process of turning a spare bedroom into a bit of a music-listening room, so with a little inspiration from the Vintage/Turntable thread, I got a Marantz 2226B receiver, Kyocera DA-310CX CD player, dug out my Technics SL-B10 turntable, and KEF C30 speakers. My current problem is deciding what to put these things on. It's a smallish room (about 9.5 x 11) and needs to have other stuff in there (bookcases, a secretary desk), but I'd like to give it a bit of a retro style to live out my Greg Brady fantasies. I haven't really found anything I like more than this console: The main problem I have with it is its height - only 17.5" high, which seems on the low side for comfortable turntable queuing. I thought about trying to put some legs on it, but it's made out of MDF with lacquer. Any insight on whether screwing (and/or gluing) some legs onto this thing? Terrible idea to do with MDF? This thing's already kind of expensive for fake-wood ($500), so I'd rather not have it collapse. This is another console I like the look of - at least it's real wood - but still fairly short at 19". Any guidance on this or good record storage solutions would be appreciated. Only have about 60 records at the moment, so I don't need a giant tower, but something other than IKEA Expedits or these from Gothic Cabinet Craft might be nice.
|
# ? Aug 3, 2012 16:56 |
|
Dont get something with open cabinets. Components are ugly.
|
# ? Aug 3, 2012 17:21 |
|
Don Lapre posted:Dont get something with open cabinets. Components are ugly. There are some components that I would proudly display in the open. The Marantz 6006, some of the Emotiva stuff.
|
# ? Aug 3, 2012 18:09 |
|
dreesemonkey posted:Thanks for the explanation. I guess you need to have harmonies and IR repeaters in each location to be able to switch signals? That 4x4 switch is pretty awesome, I don't think I'd need something as complex as that but might as well for the price. The best thing about them is the component select buttons such as DVD, TV, etc. Quick press to tell the remote to control that device, long press to execute a macro. As long as your macros are proper, all of my stuff is wife friendly in that long press on 'DVD' will send a macro to switch to discrete input for DVD, send discrete power on, etc etc. It does take a few seconds, but if anything is ever screwed up you simply hold the button again. Programming can be complex so I created a google doc spreadsheet to help remind me if I ever have to do it. To me that's worth saving $100 for each viewing location in the house or carrying one fancy remote all over the place. poo poo now I think I'm going to pick up a RM-VLZ620 for $25 to see if it's as good since they added a few more buttons. I dislike almost everything Sony makes now except their budget-ish remotes.
|
# ? Aug 3, 2012 22:28 |
|
falz posted:I do have IR repeaters in all locations, but not fancy remotes. I have Sony RM-VL600's in every room. There's a few newer versions of it now (RM-VLZ620) but for ~$20, it can control everything nicely. Yea I had heard their universal remotes were extremely nice for the price. I have a mid-range harmony for our living room and I like it, but the sony's sound tempting for other locations as we add them down the line.
|
# ? Aug 6, 2012 15:50 |
|
I can't wait to post before and after pictures of my set up. Previously had my new 60" LG Plasma on an Ikea stand, with the components below and Bose 701 towers on each side (center on the stand). I've since mounted the TV, bought a sound bar, which will soon be mounted under the TV (with this clever device: http://www.amazon.com/Soundbar-Brackets-Universal-Bracket/dp/B0036UTT4E/ref=sr_1_1?ie=UTF8&qid=1344264821&sr=8-1&keywords=soundbar+mount ) and I'm waiting for cable extensions to run all my components to a nearby closet which will be controlled with a Logitech IR repeater that will work with my Uverse box. The only thing that will be visible will be the subwoofer for the soundbar. Appreciate the feedback from this thread so far, haven't taken it word-for-word, but it's been invaluable.
|
# ? Aug 6, 2012 15:54 |
|
MrEnigma posted:Finally got my basement finished. Here are some photos of the home theater setup. Nice setup. What kind of speakers are those?
|
# ? Aug 8, 2012 02:55 |
|
TV: Samsung UN55D6000 Receiver: Sony STR-DH820 Record Player: Sony PS-LX250H Speakers: Pioneer SP-FS51 (front), SP-C21 (center), SP-BS21 (surrounds) The DVR is whatever Verizon gives out with FIOS. And a PS3 for games, blurays and Netflix. Somebody fucked around with this message at 18:21 on Aug 13, 2012 |
# ? Aug 13, 2012 01:11 |
|
Wasn't sure of the best place to post this question, but this seemed the most logical. I'm nearing completion of my 'move components to the closet' project, and wanted to find out if the Xbox 360 was dependent on the HDMI high-speed cables. I have it set up now, with them and it's working just fine with my other components (10 foot high speed coupled with a 15 foot, pushing the barrier) and am considering grabbing a 25 footer to swap out where they connect to hook it up to my basement TV when I feel like playing down there rather moving everything down. I imagine it SHOULD work if it's not dependent on the high-speed. Also, I'm not sure if this is a result of the cable setup, but I was playing COD:MW3 last night and in two occasions the TV went to black for a second and returned. Ideas? Thanks in advance!
|
# ? Aug 14, 2012 16:34 |
|
Moved house. Bought new furniture and topped off the system with a Velodyne subwoofer. Sony KDL46HX800 Sony STRDH820 Magnat Monitor Speakers Velodyne SPL800i Sony PS3 120GB Xbox 360 Quad Core PC
|
# ? Aug 15, 2012 12:45 |
|
I like the decal on your macbook pro. Where's it from?
|
# ? Aug 16, 2012 04:27 |
|
Timage posted:Moved house. Bought new furniture and topped off the system with a Velodyne subwoofer. Sweet! Thanks for sharing!
|
# ? Aug 16, 2012 07:14 |
|
Electric Bugaloo posted:I like the decal on your macbook pro. Where's it from? No idea sorry, it was a gift. Edit: Found it http://www.amazon.com/Yadda-Yadda-Design-Co-Apple-Evolution/dp/B007ZVTW3S Or google search 'Evolution of apple decal' Timage fucked around with this message at 11:16 on Aug 16, 2012 |
# ? Aug 16, 2012 10:57 |
|
Timage posted:Moved house. Bought new furniture and topped off the system with a Velodyne subwoofer. Posts like this make me so loving mad. I wish I had a sense of style.
|
# ? Aug 16, 2012 13:51 |
|
Timage posted:Moved house. Bought new furniture and topped off the system with a Velodyne subwoofer. Nice pad. Congrats.
|
# ? Aug 16, 2012 14:28 |
|
TraderStav posted:Posts like this make me so loving mad. I wish I had a sense of style. A lot of people with bad looking living areas(in my opinion) seem to just not get the 'less is more' concept, or complimentary colors.
|
# ? Aug 16, 2012 14:54 |
|
The Dave posted:A lot of people with bad looking living areas(in my opinion) seem to just not get the 'less is more' concept, or complimentary colors. My problem isn't too much, it's the wrong choices and I never seem to be able to piece anything clever together or unique. All generic crap, but that may also because I'm a tightwad living in a generic suburban area. I'm still about it though.
|
# ? Aug 16, 2012 14:55 |
|
falz posted:Unsure the brand of the rack, I snagged it off of the wall of a company that went out of business a few years back. There's a few 50' HDMI runs (monoprice) and one is 65' or so using this hdmi extender which surprisingly works fine. That rack runs a few TVs. Looks like I missed the extender in the diagram below when I created it- oh well.
|
# ? Aug 16, 2012 23:32 |
|
The range on the controllers is pretty decent. The 360 is pretty much always being used either in the basement/projector room where it's nearby, or the living room which is directly above. At worst it's about 20' away through two walls and has never been problematic at all. MS did a good job using whatever RF tech they're using.
|
# ? Aug 17, 2012 16:05 |
|
That's pretty awesome. When I finally own a house/condo/whatever I've gotta really consider running HDMI.
|
# ? Aug 17, 2012 19:40 |
|
falz posted:Unsure the brand of the rack, I snagged it off of the wall of a company that went out of business a few years back. There's a few 50' HDMI runs (monoprice) and one is 65' or so using this hdmi extender which surprisingly works fine. That rack runs a few TVs. Looks like I missed the extender in the diagram below when I created it- oh well. So does this fancy little extender get past that 25' limit to the High Speed HDMI?
|
# ? Aug 17, 2012 19:43 |
|
I'm not familiar with High Speed HDMI, I think my stuff is HDMI 1.3 mostly though.
|
# ? Aug 17, 2012 20:05 |
|
falz posted:I'm not familiar with High Speed HDMI, I think my stuff is HDMI 1.3 mostly though. Apparently it's needed to preserve 1080p, all I want is 1080p.
|
# ? Aug 17, 2012 20:08 |
|
|
# ? Apr 19, 2024 23:17 |
|
TraderStav posted:So does this fancy little extender get past that 25' limit to the High Speed HDMI? I don't know anything about the extender he uses, but I have 2 separate runs of HDMI in my house one of 35' and one 50' and I have no problem at all with them. 1080p and never drops signal or anything. They are just decent gauge monoprice cables, nothing fancy, plugged into my Yamaha receiver. 1.4 something revision I believe, although I don't use any of the newer features like ARC or Ethernet. emocrat fucked around with this message at 20:13 on Aug 17, 2012 |
# ? Aug 17, 2012 20:09 |