|
Wrar posted:It's true. One dial for temp, one for fan speed, one for the blend door position. You only need two buttons. One for AC and one for recirc. My non premium 16 is sort of like this. Its a lot uglier with a smaller screen but the physical buttons make sense and I don’t have to worry about fingerprints.
|
# ? Mar 27, 2018 13:51 |
|
|
# ? Apr 23, 2024 18:17 |
|
Yeah if it's non premium you get hard buttons. If it's premium you get to deal with the Sync bullshit for most climate controls, which is an example of the exact problem carplay/android auto was built to solve. Car manufacturers loving suck at designing interfaces.
|
# ? Mar 27, 2018 17:47 |
|
My biggest complaint with sync 3 is that there's no way to default to Bluetooth for audio. The HVAC is fine. Set to auto, adjust up/down as needed. The screen is no big deal if you really need to adjust more than that. Easy enough to press HVAC select the zone and turn the fan up.
|
# ? Mar 27, 2018 17:58 |
|
H2SO4 posted:Yeah if it's non premium you get hard buttons. If it's premium you get to deal with the Sync bullshit for most climate controls, which is an example of the exact problem carplay/android auto was built to solve. Car manufacturers loving suck at designing interfaces. One problem I’m running into with Sync 1 is that it doesn’t do anything as fast as when it was new with my iPhone 6s. It used to index my music quickly and was a breeze to navigate quickly with the physical buttons, which is what I wanted when I bought it. Now it takes 5 seconds to register an input and if I try more than one input during that five seconds it eventually pauses in a tantrum and I have to try again. There is no fast track skipping whatsoever without going back into the menu, which may take another 5 seconds. Is there a way to update or reset the car software?
|
# ? Mar 27, 2018 18:04 |
|
I ended up turning CarPlay off. The now playing screen looks like garbage imo. All I want to do is play music via USB and make calls via Bluetooth.
|
# ? Mar 27, 2018 18:11 |
|
My uncle has sync in his car and its complete SH*T, It takes forever to do anything with it. I had a basic cd player radio w/ BT for a long time and I bought an Pioneer AVH-2300NEX receiver and its AMAZING! it does everything you guys want a radio to do w/o any of the bullsh**. It did take me a long time to figure out the wiring, and now I even have a backup camera. Everything is up and running, but the cam is in my trunk. I am still scared to drill a hole in the trunk. I really need to do this in the next day or so.
|
# ? Mar 27, 2018 18:24 |
|
I dont know why these are so cheap but someone should buy them. I 100% would if they were 17s. https://www.ebay.com/itm/Set-of-4-W...uNW7Ncx&vxp=mtr
|
# ? Mar 27, 2018 19:15 |
|
its for sale direct for the same price, so its a legit price. https://shop.afswheels.com/Mach-1-Wheels_c11.htm however, to me it seems the popular new edge style wheels are Rovos Wheels, I am seeing those everywhere now, its like the Cobra / Saleen / Bullitt / & FR500 wheels are played out.
|
# ? Mar 27, 2018 20:15 |
|
kalvick posted:My uncle has sync in his car and its complete SH*T, It takes forever to do anything with it. Dude, you can cuss here, it's okay. ilkhan posted:The HVAC is fine. Set to auto, adjust up/down as needed. The screen is no big deal if you really need to adjust more than that. Easy enough to press HVAC select the zone and turn the fan up. I'd like to like auto, but sometimes my feet get hot even in auto and I want to specifically cool them off for a few minutes, and if you're in CarPlay that's not "easy enough" imo. I want a big fat blend select button like my '12 has
|
# ? Mar 27, 2018 22:08 |
|
Rolo posted:One problem I’m running into with Sync 1 is that it doesn’t do anything as fast as when it was new with my iPhone 6s. It used to index my music quickly and was a breeze to navigate quickly with the physical buttons, which is what I wanted when I bought it. So after some research it turns out my car is several versions/years behind and that you can update it via usb. The newest one addresses exactly what I’ve been whining about so fingers crossed I can see some improvements when I update this weekend.
|
# ? Mar 28, 2018 02:21 |
|
The SCARIEST thing I have ever done to my Mustang but the camera just got installed.
|
# ? Mar 28, 2018 14:42 |
|
Well done! Even with the pics I couldn’t find it, so good placement.
|
# ? Mar 28, 2018 15:32 |
|
Nice job kalv. So today I learned what a qvale mangusta is, and that the interior is a bizarro sn95. The rest of it is . Want that steering wheel though. edit: that speedo Cage fucked around with this message at 15:54 on Mar 28, 2018 |
# ? Mar 28, 2018 15:50 |
|
Only 161 in miles per hour That interior is so jarring thebigcow fucked around with this message at 05:06 on Mar 29, 2018 |
# ? Mar 29, 2018 05:02 |
|
thebigcow posted:Only 161 in miles per hour
|
# ? Mar 29, 2018 05:09 |
|
Cage posted:Ohhhhhhhhhhhhh km/h. That makes a lot more sense than a stock 4v 4.6 going 250mph. I'm an idiot. We're all idiots here. This is the Mustang thread.
|
# ? Mar 29, 2018 06:34 |
|
kalvick posted:Upon inspection of my Mustang I have noticed that the headlights have gone completely foggy again. I called up another body shop and explained how just 6 months ago before I put the car away into storage I had the lenses polished and they looked great. Consider picking up a set of depo replacements instead of tyc. I've had the chance to handle a multitude of tyc products and a depo headlight that was shipped to me by mistake. They're pretty much universally bad. You can definitely feel a difference in the quality of the materials. Hell, even cheap rear end spyder aftermarket assemblies are better quality than tyc.
|
# ? Mar 29, 2018 08:14 |
|
My 04 GT has a weird rattle/whining noise coming from somewhere on the right side, and it’s driving me insane on the Autostrada. It doesn’t manifest on lower speeds, and I have no good idea how to look for it.
|
# ? Mar 29, 2018 08:23 |
|
Vahakyla posted:My 04 GT has a weird rattle/whining noise coming from somewhere on the right side, and it’s driving me insane on the Autostrada. It doesn’t manifest on lower speeds, and I have no good idea how to look for it. My 16 does this at highway speeds. Sounds like a bit of loose heat shielding or something but I haven’t gotten a chance to peek at it.
|
# ? Mar 29, 2018 12:31 |
|
Vahakyla posted:My 04 GT has a weird rattle/whining noise coming from somewhere on the right side, and it’s driving me insane on the Autostrada. It doesn’t manifest on lower speeds, and I have no good idea how to look for it. With the car in park and the engine on, open the hood and pull the throttle linkage that will simulate the higher speed and you can maybe see where the rattle is coming from if its an engine issue? the only things that could rattle on that side that i can immediately think of... is the air filter or pipe to the throttle body loose? is the belt slipping/old? is the idler pulley needing to be replaced? thats my go to guess. squeak diagnostic = https://www.youtube.com/watch?v=AEUe6uKxTv8 http://i.fixya.net/uploads/images/180d9b6.gif = here is an engine pulley/belt diagram. link to replace idle pulley https://lmr.com/item/LRS-8678C/96-04-Mustang-46L-Smooth-Upper-Idler-Pulley link to replace tensioner https://lmr.com/item/LRS-49293/Goodyear-Mustang-Belt-Tensioner-00-04 kalvick fucked around with this message at 15:34 on Mar 29, 2018 |
# ? Mar 29, 2018 15:18 |
|
Is the fake brake ducting peeling away?
|
# ? Mar 29, 2018 15:20 |
|
Elmnt80 posted:Consider picking up a set of depo replacements instead of tyc. I've had the chance to handle a multitude of tyc products and a depo headlight that was shipped to me by mistake. They're pretty much universally bad. You can definitely feel a difference in the quality of the materials. Hell, even cheap rear end spyder aftermarket assemblies are better quality than tyc. (2000 Mustang GT Coupe, for reference.) Yay, came home to this: Why are people so crappy? Krakkles fucked around with this message at 22:53 on Mar 29, 2018 |
# ? Mar 29, 2018 22:23 |
|
Order guide for 2019s is out. Bullitt included. 480 HP. I want one. 😞
|
# ? Mar 29, 2018 22:45 |
|
ilkhan posted:Order guide for 2019s is out. Bullitt included. I'm still salty about rev matching.
|
# ? Mar 29, 2018 23:08 |
|
Why? It's a good thing?
|
# ? Mar 29, 2018 23:25 |
|
Finally got my stupid sync to start an update. The Ford site specifically tells you to use a 32GB exFat drive, which will not work. Fat32 and 2gb, however, did.
|
# ? Mar 30, 2018 15:09 |
|
ilkhan posted:Order guide for 2019s is out. Bullitt included. Makes me wonder how far they are from 100hp/L in the standard GT. Pretty sure that would be an all time first for a truly standard production American V8 that isn't some sort of special edition thing.
|
# ? Mar 30, 2018 16:10 |
|
ilkhan posted:Why? It's a good thing? Salty that they're adding it to 2019's after I bought a 2018.
|
# ? Mar 30, 2018 16:43 |
|
opengl128 posted:Salty that they're adding it to 2019's after I bought a 2018. Lol
|
# ? Mar 30, 2018 20:50 |
|
O M F G TYC headlights LITERALLY O M F G You guys are right. They are terrible. Actually the light part of it seems to be perfectly fine, every single part of the manufacturing process must have been from a child using Google 3d studio and ms paint to 3d print this thing. With some of the weather stripping pulled back, you can see there is gaps into the headlight and a ton of extra glue all over the place. There are these bits of seran wrap like tape that is melted to the weather stripping. The weather stripping is not long enough to go around the corner of the head light. When I took it out of the box it looked fine. The light bulb aim adjuster is literally half an inch away from the bracket, the screwdriver has to go in at an angle to adjust. the drivers side adjuster is in the correct location for reference. The weather stripping is not long enough to go around the corner of the head light. When I took it out of the box it looked fine. There is a huge hairline piece of plastic scratch on the inside side of the head light. You cant see it unless the sun is directly shining on it. kalvick fucked around with this message at 22:06 on Mar 30, 2018 |
# ? Mar 30, 2018 21:58 |
|
Opinions on shiftknobs, I have a white ball for a B&M shifter. I want something new and cool, but I dont want a shift pattern or a brand logo on it. it also needs to have a 1/2-20 thread. I am thinking a red #3 pool ball or something would be kinda cool. but whatever ---- recommendations.
|
# ? Mar 31, 2018 00:27 |
|
kalvick posted:Opinions on shiftknobs, I have a white ball for a B&M shifter. I want something new and cool, but I dont want a shift pattern or a brand logo on it. it also needs to have a 1/2-20 thread. Chrome skull.
|
# ? Mar 31, 2018 00:47 |
|
I have the stock shift knob from the mach 1 hanging around if you want it, I think the pattern is lightly engraved on the top though. edit:
|
# ? Mar 31, 2018 01:05 |
|
Hahaha the loving Crowd Wrecker. That’s so amazing.
|
# ? Mar 31, 2018 02:57 |
|
Cage posted:I have the stock shift knob from the mach 1 hanging around if you want it, I think the pattern is lightly engraved on the top though. If I had one, would buy it in a heartbeat.
|
# ? Mar 31, 2018 22:20 |
|
It's adorable how optimistic putting "crowd" up in 4th is.
|
# ? Apr 1, 2018 01:29 |
|
Beautiful day out today so I got my summer wheels on and cleaned off some of the winter dirt thats been on there for months. I need to paint my tailpipes...
|
# ? Apr 14, 2018 20:57 |
|
Oxford white is just the best on S550's and that stance is perfect. Looks amazing!
|
# ? Apr 15, 2018 03:32 |
|
One year ago today
|
# ? Apr 20, 2018 17:17 |
|
|
# ? Apr 23, 2024 18:17 |
|
indeed. What was the black car next to your Mustang? Is that a Pontiac G8?
|
# ? Apr 20, 2018 21:32 |