|
kimbo305 posted:Seeing that makes me want to consider updating to 46 or 50t. Just in case.
|
# ? Jul 27, 2020 03:05 |
|
|
# ? Apr 23, 2024 08:00 |
|
CopperHound posted:I don't know about you, but I think I'd have to shift down to my 40t chainring to make it up that hill <> oh yeah, what front ring.
|
# ? Jul 27, 2020 03:15 |
|
rope kid posted:EDIT: gently caress, that desert ramble route. The elevation cyclist has logged on.
|
# ? Jul 27, 2020 03:26 |
|
Yeah after I looked at the total distance it seems less wild.
|
# ? Jul 27, 2020 03:36 |
|
nah that's not too bad. 100/mi is when you start getting into hellish territory. All the TN/GA mountains are well over that and it's brutal after a few days of riding all day.
|
# ? Jul 27, 2020 03:41 |
|
For my Romeo build, I'm using 26" wheels with Rat Trap Passes as the main tires. What would be some good knobby tires for bikepacking in muddy conditions? When I did Tour de Chequamegon a couple of years ago my slick 650b 42mm Babyshoe Pass tires floated over a lot of stuff but they absolutely sucked if I was in any significant amount of mud. I know of a lot of 650b options for that bike but I'm not that familiar with touring-oriented 26" knobbies/semi-knobbies.
|
# ? Jul 27, 2020 22:51 |
|
What's the max tire clearance? You think you could fit 2.5? https://surlybikes.com/parts/extraterrestrial These are still on the fast rolling end, but they're supposed to be excellent at shedding mud. Have not ridden them in the mud, but decently fast on the road.
|
# ? Jul 27, 2020 23:29 |
|
rope kid posted:For my Romeo build, I'm using 26" wheels with Rat Trap Passes as the main tires. What would be some good knobby tires for bikepacking in muddy conditions? Are you going tubeless? Thunder Burts are popular- they would give you a little bite but still roll pretty well. I have Ikons on my off road wheelset and while I haven't used them in a while the sidewalls have survived a lot of pokes. If you want a true mountain tire then you might ask that thread. Not even sure if they make them in 26" but avoid tanwalls for bikepacking. You need that rubber on the sidewalls.
|
# ? Jul 27, 2020 23:48 |
|
kimbo305 posted:What's the max tire clearance? You think you could fit 2.5? The Wiggly Wizard posted:Are you going tubeless? Thunder Burts are popular- they would give you a little bite but still roll pretty well. I have Ikons on my off road wheelset and while I haven't used them in a while the sidewalls have survived a lot of pokes. If you want a true mountain tire then you might ask that thread. The RTPs have tan sidewalls. (not mine)
|
# ? Jul 28, 2020 00:42 |
|
Gravelking SK+ 26x2.1?
|
# ? Jul 28, 2020 01:23 |
|
I have 26x2.5" extra terrestrial tires on my troll. I'm a bit of a tire snob and they are about the limit of what I would put up in terms of tire stiffness. I highly recommend them if you are looking for an expedition tire, but since you were using rat trap passes, I imagine you might want something more... supple for shorter trips.rope kid posted:I think I'm going tubeless but this will be my first tubeless setup. Is changing tires a hassle with tubeless? E: In case you are looking for some point of reference, The ETs rolled so much nicer than the marathon mondial tires I had originally put on the bike. CopperHound fucked around with this message at 02:24 on Jul 28, 2020 |
# ? Jul 28, 2020 02:20 |
|
Clearing out my phone and found a pic of the box with all my gear, labeled for TSA convenience. I think next time, I might try to get everything onto the flight.
|
# ? Jul 31, 2020 02:26 |
|
is that iso fuel? didn't think you could even check that
|
# ? Jul 31, 2020 20:31 |
|
Bottom Liner posted:is that iso fuel? didn't think you could even check that Nothing that looks round is a fuel canister. The most round thing is just a water bottle (with stuff inside; I didn't waste space!).
|
# ? Jul 31, 2020 20:48 |
|
my people if i had gotten furloughed in march like i wanted, i'd be a hobo right now i rode from austin to san salvador in 2013-4 and it was very fun and cool and i almost died about four times, more if you count dengue, surgery, and cartels my route, roughly: 1983 trek 520, no drop bars, road gearing. i walked my bike up about 100 miles of hills lol posting for leftist rep, i lived on a commune for a week and it was great i stayed with a baker in matehuala. we traded recipes; he taught me tres leches and here he is showing off his very first apple pie in clonclusion: go be a bike hobo you're probably not gonna regret it unless you die
|
# ? Aug 3, 2020 03:09 |
|
i say swears online posted:i almost died about four times, more if you count dengue, surgery, and cartels well this demands a story time goddamn
|
# ? Aug 3, 2020 03:11 |
|
That's incredibly awesome.
|
# ? Aug 3, 2020 03:57 |
|
Well I just got back from tour myself! I biked up from Montreal along the Route Verte for a day and a half, then crossed over to the Gatineau River valley and headed down near Ottawa via my home mountain roads. The last leg was a return to Montreal via rural Ontario and the Ottawa River. 660km altogether over five days. I usually tour in the autumn and I was amazed by how many daylight hours of cycling there are in the high summer! I picked wild raspberries and ate my favourite Dutch-oven baked beans in Kazabazua, found great dirt roads and beautiful places to hang my hammock to sleep along the long cycling trails. The Route Verte is superb in many parts, many rest areas and water all along in every town (and sometimes mountain springs), I highly recommend it. The Gatineau River trails are a bit more simple, without water fountains and with crummy loose gravel in places but with varied and beautiful terrain. I rode maybe 75km on the Prescott-Russel trail in Ontario and I'd avoid it in the future and just use the country roads, it's badly finished and incredibly boring with barely any amenities. After 201km on the Route Verte Some bits of my route were very nicely paved, some were beautiful lanes. Not pictured: lovely loose gravelly parts cause it was a slog.
|
# ? Aug 3, 2020 04:21 |
|
i say swears online posted:my people Love it! I admire those that have the spirit for the bike hobo experience.
|
# ? Aug 3, 2020 04:23 |
|
SimonSays posted:660km altogether over five days. I usually tour in the autumn and I was amazed by how many daylight hours of cycling there are in the high summer! I've only wild camped once, but it'd be so tempting right now. If you're fresh in the deep afternoon, there's still 2-3 hours of riding left.
|
# ? Aug 3, 2020 05:20 |
|
Bottom Liner posted:well this demands a story time pick a spot on my map and i'll tell you something weird coolest spots were the mountains in the chihuahua desert, matehuala, the huasteca, i had surgery in veracruz, working as a conman at a mezcal distillery in oaxaca, staying with a missionary/landlord in guatemala city, and living on a dairy farm in quetzaltquetepe el salvador for a month i say swears online fucked around with this message at 09:08 on Aug 3, 2020 |
# ? Aug 3, 2020 08:49 |
|
i've never been on a bike road and they always make me jealous. i'd love to do the eurovelo stuff someday
|
# ? Aug 3, 2020 08:51 |
|
https://www.twitch.tv/hitch my dude trevor is a hitchhiker who livestreams catching rides all around the world. covid destroyed both his livelihood and his ability to pursue his passion and instead he's headed across canada on bike. I use my free amazon prime sub on him and you should too, he's a good guy. he's live pretty much all north american daylight hours at the moment
|
# ? Aug 3, 2020 09:15 |
|
i posted this at the end of the old thread so I'm gonna go ahead and post it at the beginning of this new one! i biked across the US with my friend Lucas in 2016. Lucas is an adventurer, ski instructor, climber, cyclist, and all-around cool dude. he also has one underdeveloped arm, which has done nothing to slow him down. Lucas and two other physically challenged athletes are undergoing a challenge to start at the lowest altitude point of every continent and make it to the highest altitude point entirely by human power. so they'll be cycling, hiking, scrambling, and climbing their way all over the world for the foreseeable future. they already finished south america! follow along https://www.instagram.com/lowesthighest/
|
# ? Aug 11, 2020 00:37 |
|
Found the old pics of the template I used to have a frame bag made. I can't remember which company gave the basic instructions, but it's pretty intuitive -- label everything where a strap can't go: Between pictures and having the template on hand, should be able to sew a bag to the right dimensions. At this point, I was talking to an acquaintance who was trying her hand at making bikepacking equipment (her day job is a camping gear engineer), and I thought I would get more out of a custom bag. We thought of making a radical bulge out front to increase volume. I was confident my knees would clear it. It worked -- fit was a little short toward the BB, but pretty drat good elsewhere. I have a pretty small 3 season sleeping bag, and it fits nicely into the bulge. I'll discuss that fork swap on my touring bike later.
|
# ? Aug 11, 2020 18:52 |
|
Ugh... fine, I'll say it: Nice Bulge Sewing 3d curves is not something I've managed to wrap my head around. What are the loops at the end of the zippers for? Is there another slide that we can't see in the pictures?
|
# ? Aug 11, 2020 19:36 |
|
CopperHound posted:What are the loops at the end of the zippers for? Is there another slide that we can't see in the pictures? I think they're just meant to hold while you zip closed? Tbh, that's one of my annoyances with the bag, as they tickle my calf a bit if they're not perfectly tucked tight. You can see it in the top-down shot.
|
# ? Aug 11, 2020 19:40 |
|
I'm probably getting a Soma Saga frame to build up (with the outsized assistance of a friend), and I'm giddy. :3
|
# ? Aug 13, 2020 09:37 |
|
my frame is almost 40 years old and rusty so i'm saving for a new one. i have good wheels and some other components. is there a reason not to look for a long haul trucker frame? my main purpose is touring but most of my time on the bike is neighborhood rides and i need at least a little agility. is the crosscheck the surly frame most comparable to a trek 520? is there another brand i should consider? $525 for a new frame seems reasonable for the LHT since i'll likely keep it for twenty years
|
# ? Aug 15, 2020 06:44 |
|
The closest frame to a trek 520 is an LHT. I'd get the disc trucker though, disc are really much better and honestly in 20 years, if not now, easier to get and fix. I'd stick to cable v. hydro for touring. I've always found light touring bikes too much of a compromise if you plan on typical 4 pannier fully loaded touring. My salsa vaya was a wobbly mess loaded. Watch out for surly's sizing, other than the LHT, they run very long and low, which is not really ideal for touring if you buy in size. A lot of really stupid bike stores cut surly steerers too short on the display floor and they never fit right. Surlys are supposed to have a huge stack of spacers, they literally market their forks as having steers that are strong enough to run any amount of spacers. Somas can be good as well. Comedy option if the rust is only surface rust is to get it stripped and powdercoated. I got my old trek done for $200 and that was with paying extra for bass boat purple v a simpler color.
|
# ? Aug 15, 2020 07:09 |
|
thank you for that, it's informative! i didn't realize how big the 520 was; when i bought it, i thought it was a 720 which i guess is even bigger?? if a LHT handles like a 520 (assuming they haven't changed the geometry since '83) i'm good to go there; i feel pretty agile unloaded and it's very stable with four panniers looks like some dork kept a u-lock strapped there for awhile. you said you got a strip and coat for $200? i thought it'd be closer to $400 and that changes things. the problem is that the rust seems like it's in a sensitive area of the frame. it has not progressed in the seven years i've owned it, i just want to be sure of myself if i go be a hobo again
|
# ? Aug 15, 2020 07:35 |
|
Having ridden both a LHT and a number of Treks of that vintage, I'll say the LHT will be much stiffer than the old Treks. Especially noticeable when unloaded. I used my LHT for years as a commuter and over time I came to realize it's not a great ride for around the town stuff. Sure it is capable but just not all that fun. On the other hand LHTs will have room for much wider tires, more cage mounts, and the option for disc brakes which is really nice.
|
# ? Aug 15, 2020 13:15 |
|
Yeah maybe I'm asking too much out of a frame. I really am happy with my current bike, I just wish it wasn't damaged
|
# ? Aug 15, 2020 18:29 |
|
One of our local bike manufacturer (Ventana in Rancho Cordova, CA) will do powdercoats for that. Powdercoats do limit you to certain colors. Wet paint will look better, particularly on lugged, but powdercoat will cost way less and at least protect the bike. I would recommend sticking to people who do a lot of bikes as you want someone who can treat it well. You can likely replace all the decals through velocals if you care about that. If you have a metal headbadge, make sure you keep that or have the powdercoater take it off before stripping. I think a headbadge with some experience on a freshly painted vintage frame looks great. I do think those old treks are totally worth saving. edit: I got my powdercoat 4-5 years ago, so it might cost a touch more now.
|
# ? Aug 15, 2020 18:46 |
|
i say swears online posted:I really am happy with my current bike, I just wish it wasn't damaged If you go the powder coat route, get your frame faced before reassembly. You should do that anyway if you buy a bare surly frame because they leave thick powder coat everywhere. CopperHound fucked around with this message at 18:53 on Aug 15, 2020 |
# ? Aug 15, 2020 18:51 |
|
Most of the traditional 4-pannier touring bike frames will use cheaper tubing that’s stiff and will only ride nicely with the extra load. I went with a Jamis Aurora Elite because it was sturdier than the LHT.
|
# ? Aug 15, 2020 18:52 |
|
^^^^^^ Even if it high end steel, it is generally going to be thicker and stiffer than a regular frame simply because of the necessary compromises to keep the bike from being a flexible flyer when loaded. CopperHound posted:I can't be a great judge from a picture, but it just looks like surface rust to me. Q is so bad at QC. You should also make sure the frame straight. A good bike powdercoater should face as a matter of course, but when you assume you make an rear end out of u and me.
|
# ? Aug 15, 2020 18:58 |
|
i say swears online posted:my frame is almost 40 years old and rusty so i'm saving for a new one. i have good wheels and some other components. is there a reason not to look for a long haul trucker frame? my main purpose is touring but most of my time on the bike is neighborhood rides and i need at least a little agility. is the crosscheck the surly frame most comparable to a trek 520? is there another brand i should consider? $525 for a new frame seems reasonable for the LHT since i'll likely keep it for twenty years Trek still makes a 520 model and a 520 disc now. Framesets and complete
|
# ? Aug 15, 2020 23:13 |
|
if i get my old frame powder coated, do they blast off the old paint and rust or do i do that first? i don't care about the decals (or if so i'd order a new set) but i'd keep the headplateThe Wiggly Wizard posted:Trek still makes a 520 model and a 520 disc now. Framesets and complete weird, the framesets come with an aluminum fork. iunno how to feel about that or whether it matters all that much
|
# ? Aug 15, 2020 23:26 |
|
|
# ? Apr 23, 2024 08:00 |
|
i say swears online posted:weird, the framesets come with an aluminum fork. iunno how to feel about that or whether it matters all that much They do have engineers designing the things, and while aluminum forks might see more fatigue than aluminum frames, it should be good enough for however long Trek thinks you’ll own it, which is a high bar for the 520.
|
# ? Aug 15, 2020 23:37 |