|
Scythe Fuma 2 is the cooler to get for the NR200. I don't think it fits if you plan to use the glass panel though
|
# ? Oct 15, 2020 17:12 |
|
|
# ? Apr 25, 2024 13:13 |
|
Butterfly Valley posted:Fuma 2 blocks the back top case fan, which isn't the worst thing in the world but something to consider. This is going to depend on a) motherboard socket placement and b) which direction you install the cooler. I've seen pictures of people getting a top fan over it on gigabyte mbs (which are sort of a worst case scenario) as long as they have installed such that there isn't room for a fan on the back: https://www.reddit.com/r/sffpc/comments/i8xq9p/fuma_2_in_nr200_fits_with_2x_120_fans_on_top/ Then again tolerances might be so tight it varies from unit to unit. It's something I'm going to try so I'll report back I guess.
|
# ? Oct 15, 2020 18:06 |
|
abraham linksys posted:amazon isn't giving me that option in their little return wizard, probably because it's not a great move to leave packages sitting on your porch here, sadly. hopefully by the end of january we're either over our inevitable second wave of covid or so in-the-midst-of-it i can convince amazon to grant an extension, though I think the return options it gives you depends on the reason for return. I usually pick "item defective" and just give whatever lame reason. Amazon can afford to take care of your return for you. You can say the case was too big or you have fans that don't fit in it or something lmao.
|
# ? Oct 15, 2020 21:08 |
|
I've been wanting to downsize my ATX Mid Tower (eVGA 1080ti w/ watercool block, core i9 with water cooling AIO) and I'm ok giving up the water cool block for case size. Looks like the NR200 is pretty popular, but I'm wondering what the goto goon recommended options are for case and for motherboard/power supplies in this space?
|
# ? Oct 16, 2020 00:20 |
|
Gyshall posted:I've been wanting to downsize my ATX Mid Tower (eVGA 1080ti w/ watercool block, core i9 with water cooling AIO) and I'm ok giving up the water cool block for case size. SFX/SFX-L only unless you wanna 3d print the atx power supply bracket I think it can fit an matx motherboard but it's not officially supported
|
# ? Oct 16, 2020 00:41 |
|
https://www.newegg.com/white-grey-cooler-master-masterbox-nr200p-white-small-form-factor-mini-itx/p/N82E16811119404 The White NR200P seems to be in stock at Newegg currently. I am holding off on building something, but have been staring at this thing. Edit: Black in stock too. https://www.newegg.com/black-cooler-master-masterbox-nr200p-small-form-factor-mini-itx/p/N82E16811119403
|
# ? Oct 16, 2020 00:46 |
|
Question about the NR200 - if you attach a 3.5" to the PSU cage, can you still fit in a 2x120 AIO? What about with the 3D printed ATX PSU cage?
|
# ? Oct 16, 2020 01:06 |
|
Moey posted:https://www.newegg.com/white-grey-cooler-master-masterbox-nr200p-white-small-form-factor-mini-itx/p/N82E16811119404 Almost ordered that when I saw a UK option, until I realised they still ship from the US and it basically doubled the price, noooope.
|
# ? Oct 16, 2020 01:43 |
Ordered a NR200p off of newegg
|
|
# ? Oct 16, 2020 13:38 |
|
CyberPingu posted:Ordered a NR200p off of newegg Same here, picking it up for a spare computer that my fiance wants to use for VR. 4790k will live on!
|
# ? Oct 16, 2020 18:05 |
|
Managed to snag an SF750 from micro center today. huzzah. Now I just need to buy a cpu and wait for my case to come in. (Well, and my ram/ssd, but those will come before the case)
|
# ? Oct 16, 2020 21:08 |
|
Update for anyone considering ShopBLT.com for an SF750. I ordered one on Sep 2nd and it was eventually delivered today after several emails pushing the delivery date back. So it took a while but it did get there.
|
# ? Oct 17, 2020 03:09 |
|
NoDamage posted:Update for anyone considering ShopBLT.com for an SF750. I ordered one on Sep 2nd and it was eventually delivered today after several emails pushing the delivery date back. So it took a while but it did get there. Got mine in yesterday, as well, after ordering it around the same time as you. Looks like BLT was on to something with their queue system, given all the other high profile launches lately!
|
# ? Oct 17, 2020 13:46 |
|
CaptainPsyko posted:Managed to snag an SF750 from micro center today. huzzah. Hey, the hard part is done at least, unless you're also searching for a 3080.
|
# ? Oct 18, 2020 17:19 |
|
Warmachine posted:Hey, the hard part is done at least, unless you're also searching for a 3080. Little old me looking to get an NR200, 3080 FE, 5900X, and SF750.
|
# ? Oct 18, 2020 17:47 |
|
ijyt posted:Little old me looking to get an NR200, 3080 FE, 5900X, and SF750. Pretty much the same build I'm going for except the FE part. Got the nr200 and the sf750, hopefully dell won't gently caress me on my 3080 order (they will). Then I get to decide whether to spend $240 on A12x25s or roll the dice on fan noise with arctic p12s. I'm so dumb this is gonna cost like a million dollars if I can even get a gpu. Why do I want a computer built entirely from unobtanium?
|
# ? Oct 18, 2020 18:39 |
|
A12x25 all day.
|
# ? Oct 18, 2020 18:44 |
|
VorpalFish posted:Got the nr200 Where are you planning on putting 8 fans in the nr200
|
# ? Oct 18, 2020 18:47 |
|
Butterfly Valley posted:Where are you planning on putting 8 fans in the nr200 Whoops, I can't do math - would be $200ish for 6 after tax.
|
# ? Oct 18, 2020 18:50 |
|
ijyt posted:Little old me looking to get an NR200, 3080 FE, 5900X, and SF750. Yeah this is me but Ncase M1, at least I got the 3080.
|
# ? Oct 18, 2020 21:11 |
|
I'm also strongly considering the ASUS Crosshair Impact over the Strix X570-I just for that flashback (and admittedly better organised cable terminations).
|
# ? Oct 18, 2020 21:25 |
|
Warmachine posted:Hey, the hard part is done at least, unless you're also searching for a 3080. The 3080 has been sitting in a box on my bookshelf for 3 weeks now.
|
# ? Oct 18, 2020 23:28 |
|
ijyt posted:Little old me looking to get an NR200, 3080 FE, 5900X, and SF750. Check (tempered glass version of course), check, not sure yet but I am waiting for the reviews, says 10/26 for the warehouse to actually get which would be fine. Duck and Cover fucked around with this message at 00:04 on Oct 19, 2020 |
# ? Oct 18, 2020 23:56 |
|
Duck and Cover posted:Check (tempered glass version of course), check, not sure yet but I am waiting for the reviews, says 10/26 for the warehouse to actually get which would be fine. I'm not super worried about the case and PSU, as I've got my full tower and ATX one to use in the meantime, but lordy do I wish I had the 3080 in-hand so I wouldn't have two recently released components to worry about.
|
# ? Oct 19, 2020 00:54 |
|
Finally started ordering stuff for my CPU upgrade The item I thought would take the longest to ship arrived today, the ID-COOLING IS-60 CPU cooler. Waiting on a Noctua NF-A12x15 to replace the stock cooler's and RAM currently, and will be taking a trip to a Microcenter in November to save like $65 over the online options for a 3700X + Gigabyte B550I Aorus Pro
|
# ? Oct 19, 2020 02:55 |
|
HappyCapybaraFamily posted:Finally started ordering stuff for my CPU upgrade The item I thought would take the longest to ship arrived today, the ID-COOLING IS-60 CPU cooler. Waiting on a Noctua NF-A12x15 to replace the stock cooler's and RAM currently, and will be taking a trip to a Microcenter in November to save like $65 over the online options for a 3700X + Gigabyte B550I Aorus Pro Just one thing wïh the is-60, the mounting bracket isn't Noctua quality, you can't just screw all the way. It's a decent hsf otherwise though, best I could find in that height. HalloKitty fucked around with this message at 09:45 on Oct 19, 2020 |
# ? Oct 19, 2020 09:38 |
NR200P arrived But Corsair havnt shipped my PSU yet So in the mean time...what is the "optimal" fan placement for this case?
|
|
# ? Oct 19, 2020 15:20 |
|
Most arrangements work and the difference is a couple of degrees between different configurations, but from watching a lot of people way more meticulous than me testing these things, 2x exhaust fans on top, cpu cooler exhausting out the back, extra fans as intake on the bottom if you want. This top video channel goes into way more detail than you'd ever need and the guy has a weird voice but he's meticulous in his testing https://www.youtube.com/watch?v=HcZxU_wlhB0 This video shows that most builds are generally fine https://www.youtube.com/watch?v=8k1B2tai1yg Butterfly Valley fucked around with this message at 15:33 on Oct 19, 2020 |
# ? Oct 19, 2020 15:29 |
Butterfly Valley posted:Most arrangements work and the difference is a couple of degrees between different configurations, but from watching a lot of people way more meticulous than me testing these things, 2x exhaust fans on top, cpu cooler exhausting out the back, extra fans as intake on the bottom if you want. Cheers, Im torn on what to put in it. I currently have a H100i SE 280mm AIO, so if i put that in i would probably have 2 exhaust at the top. Then potentially put the fans that came with the case on the bottom, or one on the bottom and 1 on the rear (bottom one as intake, rear as outtake). The other option is to use the AMD Ryzen stock cooler and just have the two fans one exhaust on top and 1 rear
|
|
# ? Oct 19, 2020 15:56 |
|
The rear fan mount is only 90mm and the two fans that come with the nr200p are 120mm so that's out. I think 280mm AIOs have to go on the side panel, so you could do that with the two case fans as a bottom intake and top exhaust.
|
# ? Oct 19, 2020 16:01 |
Butterfly Valley posted:The rear fan mount is only 90mm and the two fans that come with the nr200p are 120mm so that's out. I think 280mm AIOs have to go on the side panel, so you could do that with the two case fans as a bottom intake and top exhaust. Yeah the only annoying thing about that is id have to commit to the side mount. Which im not sure about as ive not settled on if i want the mesh or the glass panel yet. I might buy a 90mm fan from somewhere. Eh. Yeah i think the 280mm AIO is a bit too big for what i want to do. Looks like another part to sell off. Gonna try initially with the stock Ryzen with a 92mm on the back as exhaust and 2 exhausts on top and see how that goes. Or rather, initially have no back exhaust and just have the two on top. Oh, the AIO i have is a 240mm, not a 280 CyberPingu fucked around with this message at 17:05 on Oct 19, 2020 |
|
# ? Oct 19, 2020 16:05 |
Still. I think I might air cool this case. The insane amount of cables on the aio might make cable mgmt a nightmare
|
|
# ? Oct 19, 2020 17:22 |
|
Buy a case with no side window. Problem solved.
|
# ? Oct 19, 2020 17:32 |
Romes128 posted:Buy a case with no side window. Problem solved. I have a case with no side window....the NR200p has the option of a perforated window or a tempered glass But I can't be dealing with lovely cable management
|
|
# ? Oct 19, 2020 17:34 |
|
CyberPingu posted:I have a case with no side window....the NR200p has the option of a perforated window or a tempered glass I was just joshing I got a SM580 and I can still see through the perforations so I cable managed the heck out of it. As best as can be done with that case anyway.
|
# ? Oct 19, 2020 17:52 |
Romes128 posted:I was just joshing Ah I see. Id posted a reem of nonsense so the original post might have been missed
|
|
# ? Oct 19, 2020 18:11 |
|
I have my node 202 on a shelf that's about 11-12 inches deep - it fits just enough so that it won't topple over and kill me. It also burns with the heat of a thousand suns only kept in check by aggressive undervolting. Is there a case out there that can fit on the shelf? It seems like every case is obsessed with fitting a 3090 so they're all a bit too long to fit. Do I have to rotate this sumbitch?
|
# ? Oct 19, 2020 18:35 |
|
Kunabomber posted:I have my node 202 on a shelf that's about 11-12 inches deep - it fits just enough so that it won't topple over and kill me. Sliger CL530 has similar dimensions to the 202 and can fit a triple slot card.
|
# ? Oct 19, 2020 18:48 |
|
HalloKitty posted:Just one thing wïh the is-60, the mounting bracket isn't Noctua quality, you can't just screw all the way. It's a decent hsf otherwise though, best I could find in that height. Ah cool, thanks for the heads up. I guess just screw it in so that it's tight but the motherboard isn't bending under the tension?
|
# ? Oct 19, 2020 18:50 |
|
|
# ? Apr 25, 2024 13:13 |
|
Kunabomber posted:I have my node 202 on a shelf that's about 11-12 inches deep - it fits just enough so that it won't topple over and kill me. https://docs.google.com/spreadsheets/d/1AddRvGWJ_f4B6UC7_IftDiVudVc8CJ8sxLUqlxVsCz4/edit This spreadsheet is handy for these sorts of questions; Use a custom filter view to exclude taboo (do this by excluding any cases hilighted in blue, unless you're cool with the sketchiest of sketchy Chinese offerings), and then sort by case length; anything under 300 mm ought to work out for you?
|
# ? Oct 19, 2020 20:48 |