|
Klyith posted:Completely wrong in every single way. Bullshit you've invented in your head.
|
# ? Mar 19, 2021 15:00 |
|
|
# ? Apr 23, 2024 14:33 |
|
If the pm I received is to be believed, yes. It is. And y'all called me the audiophile!
|
# ? Mar 19, 2021 15:02 |
|
My first raspi project has been a camera for my bird feeder. Someone I showed it to expressed interest in the code, so I cleaned it up and made it public, and I figured I'd share it here, too. Camera: https://github.com/jdpdev/birbcam Web server/interface: https://github.com/jdpdev/birbserver There's still a bit of work to do to get it to set-and-forget v1, but it runs real well. Right now I'm focused on getting v1 done, but next on the list is adding machine learning to identify the bird; I've done some tests with tensor flow and a model someone's published, just need to get it integrated to the camera. HQ camera with the standard 16mm lens, and a case from Ardufruit that I paid someone to print for me. I have ideas for improving the case, but that's for later. And some action shots. That last one was taken with an Arducam lens which requires a different camera calibration (thus the tint), but fortunately I have a lead on fixing that without having to recompile raspicam. [Edit] And the debug console that shows what's going on
|
# ? Mar 19, 2021 15:49 |
|
evil_bunnY posted:I thought Opus was specifically dev'ed for voice coding? Opus has two encoding algorithms, SILK and CELT. The SILK part is a speech codec, and pre-existed Opus (it's what Skype uses and was developed by Skype and MS). The CELT part is a general audio encoder that's suitable for everything. Opus can do a neat trick where it uses both of these at the same time at low (16-24kbps) bitrate, which makes speech sound much better than the telephone sound of pure speech codecs. That still isn't good for music, but produces very transparent audio for speech. But above 32 kbps is uses only CELT, which again is not a speech-oriented codec. The main thing that Opus was specifically developed for was low encoding latency, which was an issue for all other high-quality encoders (mp3, vorbis, aac). Low latency is good for communication & live streams. They also focused most of their attention with CELT on high quality at lower bitrates, but that doesn't mean it's worse at higher bitrates. The general trend in psychoacoustic encoders has been that improving low bitrates improves everything. One downside of Opus is that it is frequency-locked to 48khz. Most music audio is in 44.1khz (if you're getting it from CD). Resamplers are essentially perfect these days, but some people don't like that it does that. Laserface posted:If the pm I received is to be believed, yes. It is.
|
# ? Mar 19, 2021 16:34 |
|
dupersaurus posted:My first raspi project has been a camera for my bird feeder. Someone I showed it to expressed interest in the code, so I cleaned it up and made it public, and I figured I'd share it here, too. This rips, thank you!
|
# ? Mar 19, 2021 17:18 |
|
Since you're all talking about Bluetooth compression - I have a pair of JBL headphones and the specs don't say much other than that they support BT 4.0. However, when I connect them to my phone or my PC via cable, they sound a little better than they do via Bluetooth (and yes, it's in A2DP / music playback mode, not in headset mode). Is there an app that can tell me which codec it's using / which codec it can support?
|
# ? Mar 19, 2021 17:47 |
|
dupersaurus posted:My first raspi project has been a camera for my bird feeder. Someone I showed it to expressed interest in the code, so I cleaned it up and made it public, and I figured I'd share it here, too. This is awesome... I’m quoting so I can follow up later. I’ve been looking into DeepStack to do AI image recognition of cars and people but I’m only starting out.
|
# ? Mar 19, 2021 18:33 |
|
dupersaurus posted:My first raspi project has been a camera for my bird feeder. Someone I showed it to expressed interest in the code, so I cleaned it up and made it public, and I figured I'd share it here, too. that's cool as poo poo
|
# ? Mar 19, 2021 18:36 |
Hey can you guys talking about audio codecs be nicer somehow? I find this really interesting and I’m learning a lot. Also birbcam is loving awesome.
|
|
# ? Mar 19, 2021 18:41 |
|
NihilCredo posted:Since you're all talking about Bluetooth compression - I have a pair of JBL headphones and the specs don't say much other than that they support BT 4.0. Android has an easy status display for which bluetooth codec is being used, but win10 makes this insanely hard. So if you have a phone that you use them with, I'd check there first -- if the phone says SBC, it's almost certainly because the headphones only do SBC. If you have an intel wifi+BT chip this package can easily tell you via a notification when you connect. (grab the msi the guy rehosted on github in the top comment, it's apparently good for all of them and you don't need the whole wifi driver package with old drivers.) Otherwise it is a massive pain in the rear end involving collecting special logs and then deciphering them in ways that quickly zoom into not worth it effort. As MikusR said on the previous page, a small increase in volume gets interpreted by your brain as sounds better. And volume through the wire is gonna be different from volume over bluetooth even if you have the two set at the same windows volume level. So I'd also do your comparison test again but make sure the bluetooth sound was set a bit quieter than the wire level. Supposedly this was a super common trick by guys selling hifi sets back in the day: they'd upsell you on speakers by switching between the two and rolling the volume up a notch on the more expensive ones. "So much better, isn't it?" tuyop posted:Hey can you guys talking about audio codecs be nicer somehow? I find this really interesting and I’m learning a lot. If cats & dogs were the ones buying hifi sets they'd be amazing snobs about it, and probably wouldn't be fooled by raising the volume a click.
|
# ? Mar 19, 2021 20:55 |
|
Anyone have hands on for a solar power unit for the Pi? The bird cam sounds like a fun project but I couldn’t reasonably run power over to our feeder.
|
# ? Mar 19, 2021 21:35 |
|
Warbird posted:Anyone have hands on for a solar power unit for the Pi? The bird cam sounds like a fun project but I couldn’t reasonably run power over to our feeder. I’d be interested in that too. I do have an outlet I could reach but so far I’ve been using battery packs
|
# ? Mar 19, 2021 22:12 |
|
I feel like it would be a pretty large array, like, more than a foot by a foot
|
# ? Mar 20, 2021 01:45 |
|
dupersaurus posted:My first raspi project has been a camera for my bird feeder. Someone I showed it to expressed interest in the code, so I cleaned it up and made it public, and I figured I'd share it here, too. You should post this in the stickied CCircus thread, its more interesting than all the watercooled PCs getting posted currently
|
# ? Mar 20, 2021 09:08 |
|
Stumbled on this while trying to get Chromium Media Edition to play Netflix in TwisterOS: Pi now has official widevine (Netflix in browser) support: https://www.linuxuprising.com/2021/03/raspberry-pi-os-gets-official-widevine.html This worked for me on a fresh install of the latest raspbian or whatever the gently caress they're calling it now. Edit: If anyone gets Netflix running on their pi with a non-shite vsync please tell me ur secrets Super Nintendo 64 fucked around with this message at 06:25 on Mar 21, 2021 |
# ? Mar 21, 2021 04:08 |
|
Hey guys, just wanted some quick advice. I'm wanting to play PC/emulator games with one of my kids on the TV and thinking that a cheaper option than a console of some sort would be a Raspberry Pi streaming my Steam games via the steamlink app. Firstly is this is just basically a good solution and secondly what are all the bits and pieces I would need to get for the system, with the plan being 2-4 xbox controllers (bluetooth), wifi streaming (I can maybe go wired if it's going to be essential for latency or other reasons), HDMI output.. anything else I might be forgetting or overlooking. I guess thirdly, is there a good Australian shop for Pi stuff and maybe a solid case recommendation since the toddler might go around dribbling on things. Thanks in advance to any responders.
|
# ? Mar 22, 2021 00:09 |
|
i use a pi 3b for steamlink and it works great. you'll want to used a wired connection, though- the wifi won't cut it. i never did get the xbox controller working wirelessly on the pi because it uses a usb dongle instead of a native bluetooth connection and i couldn't get it to cooperate so i just run it straight off the pc since they're in the same room. i've heard PS4 controllers have better compatibility but i'm not sure.
|
# ? Mar 22, 2021 00:51 |
|
Chadzok posted:
https://core-electronics.com.au/raspberry-pi.html is the cheapest store in aus for rpi
|
# ? Mar 22, 2021 01:17 |
|
Chadzok posted:Firstly is this is just basically a good solution and secondly what are all the bits and pieces I would need to get for the system, with the plan being 2-4 xbox controllers (bluetooth), wifi streaming (I can maybe go wired if it's going to be essential for latency or other reasons), HDMI output.. anything else I might be forgetting or overlooking. brains posted:i use a pi 3b for steamlink and it works great. you'll want to used a wired connection, though- the wifi won't cut it. i never did get the xbox controller working wirelessly on the pi because it uses a usb dongle instead of a native bluetooth connection and i couldn't get it to cooperate so i just run it straight off the pc since they're in the same room. i've heard PS4 controllers have better compatibility but i'm not sure. I use the same 3B and wired ethernet setup here, except I use a Steam controller with the USB dongle. I highly recommend wired over wifi. One thing to note is that with Steam controllers, Bluetooth Low Energy pairing doesn't work on the Pi Steam Link app. Their support page has a more detailed list of what types of controllers are supported and in which mode.
|
# ? Mar 22, 2021 01:38 |
|
Is there any advantage to the pi 4 or should I just get the 3b for this specific purpose?
|
# ? Mar 22, 2021 03:00 |
|
Chadzok posted:Is there any advantage to the pi 4 or should I just get the 3b for this specific purpose? With the chip shortage and 2020 stuff, I’d get whichever you can. My microcenter has been out of everything except the 2gb 4b for months I got a hearty eye roll for asking when the 3b might be restocked.
|
# ? Mar 22, 2021 03:04 |
|
The Pi 4 does gigabit ethernet if your chain supports it, the 3 B+ tops out at 300Mbps and shares bandwidth with the usb ports. Since other people are using a 3 without problem this probably doesn't matter. The 4 also needs a relatively substantial heatsink or active cooling.
|
# ? Mar 22, 2021 03:45 |
|
Ok, thanks team. Just bought this cart full of fun, hopefully the xbox controllers I just bought play nice as well.. I'll keep the packaging just in case I need to switch them for something else.code:
|
# ? Mar 22, 2021 04:23 |
|
I'm not sure what RetroPie's requirements are specifically, but the 8GB model is probably overkill for this. If it were just for Steam Link, even 1 gig of RAM is good enough. As stated earlier, I would favor the 4B over the 3B/B+ for ethernet bandwidth reasons, especially if you're using any sort of USB storage. Also, if you're using the 64-bit Raspberry Pi OS (instead of 32-bit), I don't think Steam Link works on it yet. Least I couldn't get it to work on mine.
|
# ? Mar 22, 2021 05:00 |
|
So what’s going on with the chips exactly? I assume production lag due to Covid?
|
# ? Mar 22, 2021 06:07 |
|
covid, the economic depression, the cold war with china, etc etc
|
# ? Mar 22, 2021 06:10 |
|
Centrist Committee posted:covid, the economic depression, the cold war with china, etc etc I think there's also a drain on raw materials due to crypto draining everything to make more graphics cards.
|
# ? Mar 22, 2021 09:00 |
|
gamers rise up when
|
# ? Mar 22, 2021 12:09 |
|
Fantastic Foreskin posted:The 4 also needs a relatively substantial heatsink or active cooling.
|
# ? Mar 22, 2021 13:16 |
|
Wireless xbox one controllers work well with the pi as long as you install a kernel module for them. For the newer bluetooth pads it's https://github.com/atar-axis/xpadneo and for the official wireless usb dongle it's https://github.com/medusalix/xow - I've had some wireless reception problems with the built in bluetooth and the usb dongle worked better
|
# ? Mar 22, 2021 15:59 |
|
Warbird posted:So what’s going on with the chips exactly? I assume production lag due to Covid? Started with production loss during the big covid outbreak, but chip fabs are pretty much the ideal factory that can keep working during a pandemic. (Cleanroom environment means people are already wearing masks and gloves, the air is filtered, and there aren't a lot of workers per sq ft in the first place.) Mostly that demand is way way way up. Everyone stuck at home over the last year bought entertainment gizmos, but sales of non-gizmo stuff that needs chips like cars and robots was down so it evened out. Now the non-gizmos are rebounding and gizmos are still hot, so there's a supply crunch. Also Texas's AR FREEDUMS power grid shutdown killed another couple fabs for a month, so it's only gotten worse. Bug Squash posted:I think there's also a drain on raw materials due to crypto draining everything to make more graphics cards. Crypto by and large is not a big mover for the whole world market for silicon, but it certainly don't help. The crypto deal is that video cards are just as constrained in supply as everything else. The last time crypto boomed and there was a GPU shortage, nvidia and AMD boosted their production a fuckton to fill it. This time they can't.
|
# ? Mar 22, 2021 16:23 |
|
Hey thread, I'm looking to replace my old Pi 3B with a 4. If I mostly want to use it as a lightweight PC/emulation system is there a reason to get a regular Pi 4 instead of a 400 given with the stuff I'd need the 400 is about £20 cheaper?
|
# ? Mar 23, 2021 22:13 |
|
You can get the Pi 4 with 8GB RAM, 400 is 4GB only if that's a dealbreaker
|
# ? Mar 23, 2021 22:21 |
|
From reading reviews and such I feel like 8gb is a bit overkill for the stuff I want it for, hence mostly price comparing the 4gb version of the regular Pi as well. The main other thing giving me pause is the lack of a 3.5mm jack but getting an adaptor for that isn't exactly expensive. Also I'm not gonna lie, as someone who grew up in the later part of the UK's microcomputer era the idea of a whole modern computer inside a keyboard appeals to me. njsykora fucked around with this message at 22:44 on Mar 23, 2021 |
# ? Mar 23, 2021 22:42 |
|
njsykora posted:From reading reviews and such I feel like 8gb is a bit overkill for the stuff I want it for, hence mostly price comparing the 4gb version of the regular Pi as well. The main other thing giving me pause is the lack of a 3.5mm jack but getting an adaptor for that isn't exactly expensive. You don't want the audio that comes out of a Pi's analog jack in the first place, so the loss of it does not matter.
|
# ? Mar 23, 2021 22:56 |
|
njsykora posted:From reading reviews and such I feel like 8gb is a bit overkill for the stuff I want it for, hence mostly price comparing the 4gb version of the regular Pi as well. The main other thing giving me pause is the lack of a 3.5mm jack but getting an adaptor for that isn't exactly expensive.
|
# ? Mar 23, 2021 23:56 |
|
Alucard posted:Go for it, chummer https://www.youtube.com/watch?v=guGffGw3uDg
|
# ? Mar 24, 2021 00:23 |
|
OK I bought the 400, finally I will have a slightly less painful way to emulate an Atari ST. Now I need to find a new side thing to do with the 3B.
|
# ? Mar 24, 2021 00:51 |
|
I’m looking to play around with a Pi and setup a pihole on my home network. I live in Canada and see that there’s a few kits available on Amazon.ca but some of them seem overkill. What’s the goon recommended build that will run on wifi and be protected from a cat that likes to smell/touch everything? Also, should I use Amazon.ca (I have a $25 gift card here still and Prime) or are there any decent shops in Canada that I can buy from? So far it looks like I need a Pi 3 or 4 with wifi, a power adapter, and some sort of case? My wifi network is 2 mesh deco m9 pucks so I could potentially plug into Ethernet directly if I buy a switch? I also have a tp link USB wifi dongle available if that makes things cheaper but I’m concerned about drivers. My main goal is to use this to block ads on an Nvidia shield tv and a fire stick 4K. Thanks in advance.
|
# ? Mar 26, 2021 22:18 |
|
|
# ? Apr 23, 2024 14:33 |
|
I think if you have the option, there's no downside plugging it in via ethernet.
|
# ? Mar 26, 2021 22:19 |