|
Lawnie posted:When I make pork tenderloin I usually sear the exterior of the whole thing then slice into thick medallions and sear those on both sides. I bet you could slice fully-cooked pork loin (not the same thing as tenderloin) from the SV and sear it in a hot pan then make a sauce from the resulting fond. If you don’t try it, I might sometime. This is what I had been doing as well. I treat it a lot like boneless skinless chicken breast, in a way. If you get the whole loin from a Costco or something, there usually is a bit of a fat cap on it that'll sear up nice. Otherwise when I'm searing, I try to get some sort of fat or oil into the pan to help with that. Although now that I say that, I can't help but wonder if I shouldn't be considering using the grill because it likely can get a lot hotter than the pan . . . .
|
# ? Mar 19, 2021 18:14 |
|
|
# ? Apr 19, 2024 17:01 |
|
Lawnie posted:Not really, I don’t think, it’s a very lean cut without a lot of connective tissue so it’s probably not very well-suited to the long cooking times of the smoker. Well now I have to look at the label of the one we bought yesterday since I’m probably gonna cook two of them, and make sure what they are because now I forget whether it’s pork loin or pork tenderloin. I’d not be opposed to making a sauce of some sort from the fond, in fact I’ve still got some bacon bits in the cast iron from last night’s butternut squash pasta that might lend their flavor too. Not sure exactly what else to add to it, though. Do they make pork broth? Zarin posted:This is what I had been doing as well. I treat it a lot like boneless skinless chicken breast, in a way. I don’t know, if you have a cast iron they can get pretty hot even on low settings—at least on a gas stove. In fact on a knob with 1-10 on it, at 2-3 low heat most oil reaches its smoke point in that thing, including avocado oil which is a staple in our home and the only thing I use for cooking aside from olive oil, which I don’t ever use in a cast iron given its relatively low smoke point. life is killing me fucked around with this message at 18:20 on Mar 19, 2021 |
# ? Mar 19, 2021 18:16 |
|
Lawnie posted:Not really, I don’t think, it’s a very lean cut without a lot of connective tissue so it’s probably not very well-suited to the long cooking times of the smoker. I smoke pork tenderloin all the time, and it turns out fine. You don't do a 12-hour smoke with it, because yeah it'll be dry, but a low smoke for a couple of hours works great and the smoke flavour is nice. I smoke from raw, but 30 mins at 225 for something post-SV would pick up a bunch of the flavour and colour without overcooking IMO. Otherwise I sear it after SV. Have never once successfully made a bag-juice sauce, but I'm sure it's possible!
|
# ? Mar 19, 2021 18:37 |
|
life is killing me posted:Well now I have to look at the label of the one we bought yesterday since I’m probably gonna cook two of them, and make sure what they are because now I forget whether it’s pork loin or pork tenderloin. A really easy sauce that’s good with pork: Deglaze with a cup of water or chicken stock/broth (pork stock is a thing but I’ve never seen it in the store), then whisk in half a cup of heavy cream followed by a tablespoon of Dijon mustard. Bring up to a simmer to thicken a bit, then remove from the heat and whisk in a pat of cold butter. The emulsion will probably be hard to start with just the water and cream, but adding the Dijon and butter really helps to stabilize the whole sauce. Obviously season to taste with salt and pepper before serving. E: Subjunctive posted:I smoke pork tenderloin all the time, and it turns out fine. You don't do a 12-hour smoke with it, because yeah it'll be dry, but a low smoke for a couple of hours works great and the smoke flavour is nice. I smoke from raw, but 30 mins at 225 for something post-SV would pick up a bunch of the flavour and colour without overcooking IMO. Good to know, I’ll have to try this sometime because I seemingly always have pork tenderloin on hand. Probably should have figured treating it like chicken would be pretty good on the smoker.
|
# ? Mar 19, 2021 18:39 |
|
Well it’s pork tenderloin, so does that change things re: smoking it? Might just sear it anyway, not sure I want the hassle of smoking it tonight.
|
# ? Mar 19, 2021 20:54 |
|
life is killing me posted:Well it’s pork tenderloin, so does that change things re: smoking it? Might just sear it anyway, not sure I want the hassle of smoking it tonight.
|
# ? Mar 19, 2021 21:05 |
|
Oh poo poo I forgot you put that on the recipe thread. I’m gonna have to play with the temp though...my wife definitely will not eat it if it looks pink
|
# ? Mar 19, 2021 21:18 |
|
I’m sorry to hear that, but I understand. It’s taken a while for me to retrain my family to judge doneness by muscle-fibre texture instead of colour.
|
# ? Mar 19, 2021 21:18 |
|
I went with 136 because that's what the Joule app recommended, you could go as high as 158 to eliminate pink. But you want that pink n juicy loin, lemme tell you.
|
# ? Mar 19, 2021 21:21 |
|
Subjunctive posted:I’m sorry to hear that, but I understand. It’s taken a while for me to retrain my family to judge doneness by muscle-fibre texture instead of colour. KOTEX GOD OF BLOOD posted:I went with 136 because that's what the Joule app recommended, you could go as high as 158 to eliminate pink. But you want that pink n juicy loin, lemme tell you. I got made fun of in the general questions thread for having the audacity to hope my wife would accept the time-temperature curve and get over the pink Alas, this was not the case
|
# ? Mar 19, 2021 22:52 |
|
life is killing me posted:I got made fun of in the general questions thread for having the audacity to hope my wife would accept the time-temperature curve and get over the pink This is Joule's visual doneness guide.
|
# ? Mar 19, 2021 23:09 |
|
KOTEX GOD OF BLOOD posted:Maybe you could show her this? I have the Joule and am using that recipe And I've tried that I've tried everything, time-temperature charts, food science articles She will not eat any white meat that is still pink due to some mental block and the fact her little brother got sick for days once after eating pink pork (she even admitted to me that he'd undercooked it but she still won't eat it pink) poo poo I even told her that ham is pink and so are parts of pulled pork
|
# ? Mar 19, 2021 23:40 |
Well that is nitrates. SV pork will still be good at 150 though, just not as good as it could be just like regular cooked pork.
|
|
# ? Mar 19, 2021 23:56 |
|
Some people just grew up eating a certain way and don't want to change. It is frustrating to feel limited by a spouse who is (in your mind, if not necessarily in the grand scheme of things) a picky eater. I know the feeling of "ugh I can only have this when we eat out/my spouse is out of town/has other dinner plans, because only I will eat it." I guess just remember that some people prefer the familiar and to them, we're the annoying ones trying to constantly feed them weird things. Part of it is how they grew up too. My wife won't eat chicken skin, "undercooked" red meat, spicy food, or shrimp (unless it's fried). This mirrors my MIL's own aversions and therefore what kind of food she ate and didn't as a kid.
|
# ? Mar 20, 2021 00:35 |
|
Well here it is, sous vide pork tenderloin. 158F for 1.5hrs. A little of the sauce goes a long way, but I think it turned out pretty good.
|
# ? Mar 20, 2021 01:41 |
|
life is killing me posted:I have the Joule and am using that recipe I weaned my wife from 155F pork down to 140F one degree at a time. Each time I made pork, I would turn it down one degree. Worked like a charm.
|
# ? Mar 20, 2021 02:43 |
|
Sportman posted:I weaned my wife from 155F pork down to 140F one degree at a time. Each time I made pork, I would turn it down one degree. Worked like a charm. So basically how you get a toddler to start falling asleep on their own Intriguing
|
# ? Mar 20, 2021 02:47 |
|
Yeah, I think I've done 138-140 in the past. I haven't tried smoking a sv loin, but from doing a quick smoke on other sv meats, yeah what Subjunctive said. I've also sliced & seared off the slices, but I like the presentation more of searing the whole thing & then slicing I guess. Also that gets messier if you're stuffing it. If it's just a matter of pan size, you could also just cut the loin in half & sear off the halves, then slice though. I've done the ad hoc fig & fennel jam loin as a sv tenderloin a few times and it's still some of the best pork I've ever had.
|
# ? Mar 20, 2021 06:08 |
|
life is killing me posted:So basically how you get a toddler to start falling asleep on their own She eventually figured it out, but by that point we were down like 10 degrees, and she kept commenting on how good the pork tasted.
|
# ? Mar 24, 2021 16:59 |
|
Sportman posted:She eventually figured it out, but by that point we were down like 10 degrees, and she kept commenting on how good the pork tasted. And I’m sure she also noticed how she never got sick from eating it either
|
# ? Mar 25, 2021 19:09 |
|
Been trying to do sous vide hollandaise for eggs benedict, but it never turns out right. I just tried anovas recipe and my sauce just always seems to break. Does anyone have any suggestions? I know it'll come out lumpy but even after immersion blending it comes out thin and broken and not at all thick like how I imagine hollandaise.
|
# ? Mar 28, 2021 23:11 |
|
Skyarb posted:Been trying to do sous vide hollandaise for eggs benedict, but it never turns out right. I just tried anovas recipe and my sauce just always seems to break. Does anyone have any suggestions? I know it'll come out lumpy but even after immersion blending it comes out thin and broken and not at all thick like how I imagine hollandaise. If that's not it, try boiling some water and adding like a Tbsp and whisking like a motherfuck/hit it with the blender. If that fixes it then your emulsion was either too cool or your eggs were low on lecithin. Comedy molecular/modernist option: buy a bag of lecithin powder and add a pinch to see if that helps.
|
# ? Mar 29, 2021 06:39 |
|
SubG posted:Is it breaking or is it just thin? If it's runny but not broken then it could just be the eggs are too old. If you get the same result from immersion blender mayo (1 cup oil, 1 egg, 1 Tbsp of mustard if that's how you roll), that's it. So I moved away from the sous vide and did Kenji Lopez's two minute hollandaise which consists of melting butter to 220F and then slowly pouring that into a cup with the yolk/water/lemon juice with an immersion blender constantly running and that absolutely did the trick, it came out beautifully. I also used about twice as much butter using this method.
|
# ? Mar 29, 2021 16:19 |
|
Skyarb posted:So I moved away from the sous vide and did Kenji Lopez's two minute hollandaise which consists of melting butter to 220F and then slowly pouring that into a cup with the yolk/water/lemon juice with an immersion blender constantly running and that absolutely did the trick, it came out beautifully. I also used about twice as much butter using this method. Was gonna suggest this, I always make it that way.
|
# ? Mar 29, 2021 18:32 |
|
I once made that recipe but misunderstood it, I started with the butter and slowly added the egg yolk. Did not work.
|
# ? Mar 29, 2021 18:33 |
|
I always just do hollandaise in a coffee cup in the microwave.
|
# ? Mar 30, 2021 02:40 |
|
I do hollandaise in a stainless steel bowl double boiler on top of the water my eggs will be / are being poached in. Turns out that whole butter and whole egg actually makes a decent emulsion.
|
# ? Mar 30, 2021 03:45 |
|
Joule has an "autostart timer" function, where you add the food in as soon as you pour the water bath, and when the temp is reached it starts the timer on its own. This is convenient, but is it actually safe? I've been doing this with frozen chicken.
|
# ? Mar 30, 2021 17:09 |
|
I don’t use it because it seems like it would mess with the texture of the food...but I guess if you can leave it in the water bath after it’s done, maybe the temperature increasing that way is no different. Frozen though, not sure—if you tell Joule it’s frozen and then it thaws a bit and cooks from there it might be different texture than you wanted?
|
# ? Mar 30, 2021 17:12 |
|
I feel like this would depend on how much mass of frozen stuff you have, how big your water bath is, and the logic circuitry they are using. Though, if you are just doing a couple chicken breasts separately (i.e. not frozen together into one solid mass) you should be fine.
|
# ? Mar 30, 2021 17:21 |
|
In my experience frozen food is thawed in about an hour in room temp circulating water in my Anova setup. I have a very hard time believing that cooking food from frozen, which would thaw and begin cooking much, much quicker than unheated room temp water, keeps food in the danger zone for any meaningful amount of added time.
|
# ? Mar 30, 2021 17:32 |
|
My concern is that the water is being heated during the thawing process, and if the water bath is large enough that could mean a substantial amount of time in the danger zone.
|
# ? Mar 30, 2021 17:55 |
|
KOTEX GOD OF BLOOD posted:My concern is that the water is being heated during the thawing process, and if the water bath is large enough that could mean a substantial amount of time in the danger zone. The moment you drop a frozen item into even pre-heated water, the temp plummets and the SV starts heating it back up.
|
# ? Mar 30, 2021 18:08 |
|
I should have specified: by far it is the size and shape of the meat mass that will determine how long any parts are in the danger zone. 3-4 separate vacuum sealed frozen chicken breasts clipped to different locations or floating around: no problemo those same 4 breasts frozen into a solid sphere-o-meat: might be a problemo
|
# ? Mar 30, 2021 18:58 |
|
KOTEX GOD OF BLOOD posted:My concern is that the water is being heated during the thawing process, and if the water bath is large enough that could mean a substantial amount of time in the danger zone. Baldwin gives tables for the time to get meat up to temperature from fridge temperature and from frozen, for various shapes and thicknesses of meat. For a 25mm/1" slab the difference is ~half an hour, for a cylinder it's ~15 minutes. That is, to within rounding error (and with a couple asterisks about the size and shape), the length of time it takes for the meat to get from freezer temperature to fridge temperature. The time spend in the danger zone will be roughly the same. Why? Those tables are to get the meat to within 1 F/0.5 C of the water temperature, and they're relatively independent of the water temperature. And why is that? Because the rate of change of the meat temperature is proportional to the temperature difference. So the curve ends up looking pretty much the same over large temperature ranges. Baldwin says that the tables are valid for the range between 110 F/ 45C and 175 F/80 C. What are you cooking your chicken parts to? Like somewhere between 140 and 160, depending on the part of the bird and your personal preferences on poultry texture. If you're putting a couple chicken breasts in your puddle machine and it's dropping from 140 to below 110 holy poo poo get a bigger water bath because you're doing it wrong. If you're not doing it wrong and you're using a remotely sane amount of water for the food you're trying to cook, not even an issue.
|
# ? Mar 30, 2021 22:17 |
|
I've been using an Anova Precision for a few years now, and loving it. I use an old Foodsaver vacuum sealer that my folks gave me since they weren't using it and it has been fine. My wife just offered to get me this: https://www.amazon.com/dp/B08GZH6Y36/ref=cm_sw_r_cp_apa_glc_fabc_8EN8R4754DKTRZ4WM0NK for my birthday, since some friends of ours have one, but I wanted to get some opinions before shelling out the money. I think it would be nice to not have to worry about excess moisture before sealing, and I could do some fun things with wet ingredients, but I'm not very sophisticated with techniques, so I'm probably overlooking something. What do y'all think?
|
# ? Apr 7, 2021 05:11 |
|
Imasalmon posted:I've been using an Anova Precision for a few years now, and loving it. I use an old Foodsaver vacuum sealer that my folks gave me since they weren't using it and it has been fine. My wife just offered to get me this: https://www.amazon.com/dp/B08GZH6Y36/ref=cm_sw_r_cp_apa_glc_fabc_8EN8R4754DKTRZ4WM0NK for my birthday, since some friends of ours have one, but I wanted to get some opinions before shelling out the money. I think it would be nice to not have to worry about excess moisture before sealing, and I could do some fun things with wet ingredients, but I'm not very sophisticated with techniques, so I'm probably overlooking something. I suppose the real question here is: what does she want you to cook that you can't with your current sealer?
|
# ? Apr 7, 2021 05:17 |
|
sous vide asparagus is p. great with a little lemon juice. think I'm gonna pick up some more what with it being $1 a pound right now.Zarin posted:I suppose the real question here is: what does she want you to cook that you can't with your current sealer? chamber vacuum sealers are just a lot nicer in general. they pull a much better vacuum, they make much better seals (I've had some problems with my foodsaver not getting a good enough seal and it letting go during prolonged high-temperature cooking - 180F for an hour or two is tough, although my new one with the sous vide mode seems to work better), you can pack liquids like soups, they are designed for higher duty cycles, etc etc. I've got no info on that one in particular, and it looks a little small (the downside to chamber vacuum sealers is that everything you're sealing has to fit inside the chamber - so you can't seal arbitrarily large things like steaks, fish filets, etc if they are too big for the chamber), but you can pick up chinese knockoffs of the bigger units for about $400 as well. You probably do want a model with an oil pump, you have to change the oil every now and then but they are heavier duty than the air-cooled ones.
|
# ? Apr 7, 2021 20:21 |
Plus with a chamber vac you can compress fruit which is rad as hell.
|
|
# ? Apr 8, 2021 05:48 |
|
|
# ? Apr 19, 2024 17:01 |
|
Paul MaudDib posted:sous vide asparagus is p. great with a little lemon juice. think I'm gonna pick up some more what with it being $1 a pound right now. I’ve been using my VacMaster VP120 for over a decade. It’s not an oil pump, just regular air or whatever. Works great. Plenty big and powerful enough. Of course now that I say that is the week it finally dies. At least I should probably put new teflon tape on the seal bar. It’s pretty old... Camber sealers are totally rad though. So many things you can do. Sous vide. Compress fruits. Remove bubbles from alginate solutions or blended eggs (for sous vide omelettes). I put a loaf of sourdough in there right after it came out of the (Anova precision) oven. Impossibly crackly skin with amazing soft interior.
|
# ? Apr 8, 2021 06:05 |