|
i was doing something like that but far simpler in that i was trying to route everything through a reverse proxy that would strip the https out of things since old poo poo like w98 don't support most of the new protocols lol @ web tv posting though that owns
|
# ? May 21, 2021 11:29 |
|
|
# ? Apr 23, 2024 07:50 |
|
Zamujasa posted:i was doing something like that but far simpler in that i was trying to route everything through a reverse proxy that would strip the https out of things since old poo poo like w98 don't support most of the new protocols WebOne already does that if you just want something working, it will also do image-recompression and a few other neat tricks you should also do codepage conversion for modern web stuff otherwise basically all non-ascii characters render as random noise, UTf-8 is not very well supported on legacy browsers i convert to windows-1252, which works well with iCab
|
# ? May 21, 2021 21:43 |
|
i'm doing it now with my new version I'm building. based on the accept-language of the browser (if one is provided), I encode the outputted HTML into its respected encoding (So now Japanese properly converts to Shift_JIS, which is how it renders here). But yeah, encodings on these old browser is a pain. i also added image compression and resizing as well (either site by site, the browser that's being used, or both. so if you're using an old Netscape that doesn't support PNGs, it'll convert it to gif or jpeg). youtube is also, mostly, working now. https://twitter.com/drasticactionSA/status/1395573432641851392 Drastic Actions fucked around with this message at 22:17 on May 21, 2021 |
# ? May 21, 2021 22:15 |
|
jesus christ
|
# ? May 22, 2021 08:09 |
|
Drastic Actions posted:i'm doing it now with my new version I'm building. thats sweet as gently caress, nice link to the tool too. that might make my attempt work better i have a vintage toshiba satellite that came with windows and 32 mb of ram. iupgraded it to have 128mb more and it has a wifi pcmcia card and somehow a driver that supports 80211g its funny how much smaller programs were back then
|
# ? May 22, 2021 08:35 |
|
I remember Word for Windows 6.0 weighing in at 22MB and what a mind blowing amount of space it required was
|
# ? May 22, 2021 11:19 |
|
64 bit means that programs are twice as big now! madness! bring back real mode IMO
|
# ? May 22, 2021 11:20 |
|
good god all a yall
|
# ? May 22, 2021 22:31 |
|
My logic analyzer arrived! I don’t have probes for it yet (they’re arriving this week) but it passes its built-in self test. it’s an HP 16700A analyzer with a 16557 135MHz sampling card. runs a locked-down HP-UX with some sampling and analysis software on top. can be remote controlled over the network if I can find the right software too. it’s already running the last version of the analysis software. I found the install media and threw on all the add-ons and CPU support packages. I don’t have any of the emulator modules but it’s got a JTAG port at least for anything I have with JTAG. https://twitter.com/LuigiThirty/status/1396159324527923204 https://twitter.com/LuigiThirty/status/1396161190280187911 Luigi Thirty fucked around with this message at 01:16 on May 23, 2021 |
# ? May 23, 2021 01:14 |
|
I made some cubes spin on a Raspberry Pi 4. https://twitter.com/s_ridenour/status/1396273615033618432 edit: posted this from my Raspberry Pi 4, too
|
# ? May 23, 2021 02:23 |
|
Drastic Actions posted:i'm doing it now with my new version I'm building. as our resident CDN employee that cowers at anything older than http2 i'm sharing this at work to horrify people. oh my god. you monster
|
# ? May 23, 2021 02:56 |
|
i might be loving around with a switch soon so whats the best way to run 11-ish meters of ethernet cable from 1 room to a room more or less directly above it without drilling holes in poo poo keep in mind there IS a staircase just outside both rooms
|
# ? May 23, 2021 03:12 |
|
If you're not drilling I assume it's at least semi-temporary, and I've definitely had cables running from floor-to-floor via a window for a few months at a time. The sunlight will eventually degrade the insulation, but if the cable falls apart and shorts out it won't damage anything upstream, it'll just stop working.
|
# ? May 23, 2021 03:25 |
|
Stack Machine posted:If you're not drilling I assume it's at least semi-temporary, and I've definitely had cables running from floor-to-floor via a window for a few months at a time. The sunlight will eventually degrade the insulation, but if the cable falls apart and shorts out it won't damage anything upstream, it'll just stop working. windows aren't really an option either honestly how bad of an idea is just sorta taping it to the ceiling my main issue is doorways though
|
# ? May 23, 2021 03:27 |
|
It'll probably eventually fall if you tape it to the ceiling. Could you run it around the edge of the room on the floor and under the corners of doorways?
|
# ? May 23, 2021 04:05 |
|
My coworker mentioned buying some of those Ethernet-over-AC adapters recently, apparently they're reasonably priced and work well these days. He's in Canada so I don't know if there's any inherent difference between NA and European wiring that might make that a problem
|
# ? May 23, 2021 04:40 |
|
power over ethernet would almost certainly work how long the cable will stay taped up depends on what kind of tape you use, but any tape that will support it indefinitely will probably be hell to get off the walls if you ever have to
|
# ? May 23, 2021 05:14 |
|
the main (heh) power difference is that north american AC is 110 volts at 60 hz, and europe is 220-240 volts at 50 hz. i dunno if that matters for ethernet-over-ac devices though
|
# ? May 23, 2021 05:17 |
|
your bits are gonna get all confused
|
# ? May 23, 2021 08:24 |
|
Stack Machine posted:It'll probably eventually fall if you tape it to the ceiling. Could you run it around the edge of the room on the floor and under the corners of doorways? good idea, i could try that
|
# ? May 23, 2021 08:27 |
|
for our apartment we have ethernet cables running along the edges of the floor, with two strategically placed rugs to cover where they cross over the hallway assuming you give yourself a decent amount of slack this seems to work well, if not exactly the most stealthy way. but we've had it like this for years
|
# ? May 23, 2021 09:33 |
|
yea i might have to tape it to the wall at one point but other than that it should work i think
|
# ? May 23, 2021 09:37 |
|
just use a flat cable and construction staple it to the brick or whatever
|
# ? May 23, 2021 10:16 |
|
eschaton posted:just use a flat cable and construction staple it to the brick or whatever ... if you can get flat ethernet cables this poo poo's going to be a lot easier
|
# ? May 23, 2021 11:48 |
|
lol nvm my stepdad said there's no way im running ethernet up to my bedroom
|
# ? May 23, 2021 12:14 |
|
after i bought my own place i strung around 200m of cat6 cable all over the place highly recommended
|
# ? May 23, 2021 12:18 |
|
r u ready to WALK posted:after i bought my own place i strung around 200m of cat6 cable all over the place that was the plan yeah though more like 20m
|
# ? May 23, 2021 12:30 |
|
hbag posted:lol nvm my stepdad said there's no way im running ethernet up to my bedroom move out
|
# ? May 23, 2021 13:13 |
|
do you have a coax connector for cable in your room and one near the router? MOCA adapters would work if so.
|
# ? May 23, 2021 13:18 |
|
hbag posted:i might be loving around with a switch soon so whats the best way to run 11-ish meters of ethernet cable from 1 room to a room more or less directly above it without drilling holes in poo poo
|
# ? May 23, 2021 13:54 |
|
spankmeister posted:move out lol evil_bunnY posted:nail cable brackets an option? that was the main reason he said no doesnt want to be hammering poo poo into walls
|
# ? May 23, 2021 13:58 |
|
Jonny 290 posted:as our resident CDN employee that cowers at anything older than http2 i'm sharing this at work to horrify people. oh my god. you monster it is funny to think that once you turn off SSL, the underlying protocols have been (afaik) basically unchanged for this long. I can still talk to modern web servers just fine on these old computers, as long as the content I send back is something it will understand. speaking of which, I've been playing around with video codecs to get baselines for how far I can push some of these computers with what they'll play. you just need to point to a video file (local on disk or on a URL the server can access, with parsers for YouTube to get the raw muxed files) with a query string of format specifications and it'll spit it out. this pc has a Pentium 133, with 32 MB ram and a 4 MB S3 ViRGE DX. it can go up to 240p on ASF and RM, but it'll use all the CPUs power to do it, leaving the machine nearly useless. going down to 96p gives some room for multitasking. https://cdn.discordapp.com/attachments/117839290796343297/846050975214993448/american_jesus.mp4 Drastic Actions fucked around with this message at 16:54 on May 23, 2021 |
# ? May 23, 2021 16:51 |
|
If your stepdad said no then it just means you haven't established dominance. Challenge him to a feat of strength and do whatever it takes to win. I know it sounds roundabout but that's the only way you'll ultimately solve the underpowered HDD issue.
|
# ? May 23, 2021 17:16 |
|
hbag posted:windows aren't really an option either run it through linux then real talk i used an old router and wrt (dd in my case since it was on already but openwrt is a good option) to create a wireless bridge that worked for a bunch of ethernet devices then used a switch on the other end to handle a bunch more when i wanted to avoid putting cables through a wall for a temporary office setup
|
# ? May 23, 2021 17:16 |
|
Delete Facebook, lawyer up, hit the gym. Yadda yadda yadda, your Plex server works. ez pz.
|
# ? May 23, 2021 17:16 |
|
shoeberto posted:If your stepdad said no then it just means you haven't established dominance. Challenge him to a feat of strength and do whatever it takes to win. I know it sounds roundabout but that's the only way you'll ultimately solve the underpowered HDD issue. once you lay the cable, piss all over it, that will mark it as yours
|
# ? May 23, 2021 17:21 |
|
Agile Vector posted:run it through linux then wouldnt a wireless bridge defeat the whole point of using ethernet or am i completely wrong about thinking that wireless is slower than hardwired poo poo
|
# ? May 23, 2021 17:24 |
|
It depends on the number of antennas in your device but 802.11ac can hit over 1 gbps, same as gigabit ethernet. Minimally you should get around 400 mbps. Why do you need transfers that fast anyway
|
# ? May 23, 2021 17:29 |
|
Sagebrush posted:Why do you need transfers that fast anyway autism
|
# ? May 23, 2021 17:30 |
|
|
# ? Apr 23, 2024 07:50 |
|
Endless Mike posted:do you have a coax connector for cable in your room and one near the router? MOCA adapters would work if so. I somehow did not realize these were a thing, thanks for this. Now I have dumb ideas.
|
# ? May 23, 2021 17:35 |