|
NoneMoreNegative posted:I'm really digging my UP! Mini, prints are a great quality (down to .20mm) - only thing that might put you off is its a very 'closed' system-in-a-box, even down to the controlling sowtware, not 'hacker friendly' at all as far as I can see. It looked absolutely rock solid, it's just that my time still isn't quite valuable enough to make it worth the cost of going ready-made. we had an american in the space talking about the Kossels his space had been building back home (Seattle, maybe? they have a bunch there) and maaan I'm liking the look of these delta designs a whole lot, that build volume is insane e: shiiit those detail prints. drat. can everyone else testing their 3d printers stop printing godddamn yodas for five seconds and look at those. Usagi-Sauce fucked around with this message at 01:16 on Jan 28, 2014 |
#
?
Jan 28, 2014 01:11
|
|
|
|
| # ? Jun 3, 2023 09:37 |
|
|
Usagi-Sauce posted:maaan I'm liking the look of these delta designs a whole lot, that build volume is insane Build volume, is it? https://www.kickstarter.com/projects/re3d/gigabot-3d-printing-this-is-huge 24inch cube? Fffffff I want one, even though it is several thousand $$$ and I have nowhere to put such a gargantuan contraption.
|
|
#
?
Jan 28, 2014 01:17
|
|
|
ol qwerty bastard posted:gonna move in here so i can stop clogging up the pics thread with my stop-motion video stuff owns
|
|
#
?
Jan 28, 2014 01:17
|
|
|
802.11weed posted:Thanks for that, doc block. now i just need to figure out what everything on it means that schematic is pin-accurate for a 74HC595, so if you just put the chips in and wire it up like shown it'll work. 802.11weed posted:Thanks for that, doc block. now i just need to figure out what everything on it means that schematic is pin-accurate for a 74HC595, so if you just put the chips in and wire it up like shown it'll work. ol qwerty bastard posted:gonna move in here so i can stop clogging up the pics thread with my stop-motion video stuff that's cool as hell. Doc Block fucked around with this message at 01:53 on Jan 28, 2014 |
|
#
?
Jan 28, 2014 01:50
|
|
|
ol qwerty bastard posted:gonna move in here so i can stop clogging up the pics thread with my stop-motion video stuff Nice!
|
|
#
?
Jan 28, 2014 02:01
|
|
|
DaTroof posted:Nice!
|
|
#
?
Jan 28, 2014 02:25
|
|
|
and here's curiosity going the other way i need a longer table, and also more red shirts
|
|
#
?
Jan 28, 2014 02:54
|
|
|
i like that the red shirts pick up as rust/dirt in your gifs much like the so-called red planet is looking from rovercams
|
|
#
?
Jan 28, 2014 02:58
|
|
|
syscall girl posted:i like that the red shirts pick up as rust/dirt in your gifs much like the so-called red planet is looking from rovercams i assumed he was correcting the colours to look that way
|
|
#
?
Jan 28, 2014 03:03
|
|
|
Usagi-Sauce posted:i assumed he was correcting the colours to look that way oooh, effort i've heard of that but it didn't occur to me because of the way some Quik & EZ gif software works
|
|
#
?
Jan 28, 2014 03:05
|
|
|
Usagi-Sauce posted:i assumed he was correcting the colours to look that way yeah, i hosed with the hue in photoshop
|
|
#
?
Jan 28, 2014 03:11
|
|
|
ol qwerty bastard posted:and here's curiosity going the other way love ur poo poo mate
|
|
#
?
Jan 28, 2014 04:01
|
|
|
ol qwerty bastard posted:and here's curiosity going the other way frickin awesome. xpost to the lego thread, it'll be a breath of fresh air next to constant mech-posting: http://forums.somethingawful.com/showthread.php?threadid=3328496
|
|
#
?
Jan 28, 2014 10:01
|
|
|
Socracheese posted:c_node? o_node? you win, they're ONodes now, remember to demand your cut when this poo poo makes me a literal hundredaire
|
|
#
?
Jan 28, 2014 23:56
|
|
|
jony ive aces posted:lol if u don't get your own bespoke chips fabbed this but unironically you can spin a few wafers on reasonably modern processes for surprisingly cheap these days
|
|
#
?
Jan 29, 2014 00:05
|
|
|
Bloody posted:this but unironically  enlighten me, please
|
|
#
?
Jan 29, 2014 00:09
|
|
|
i'm assuming he means "surprisingly cheap!" like "well, it used to cost you $100,000 a wafer, now it's only $10,000"
|
|
#
?
Jan 29, 2014 00:16
|
|
|
Doc Block posted:
well there's obviously MOSIS which is like 40k? per wafer? or something in that ballpark? CMP is http://cmp.imag.fr/products/ic/?p=prices then there's some german fab house that we quoted some multi-wafer runs from with confusingly low 5-digit numbers
|
|
#
?
Jan 29, 2014 00:17
|
|
|
Sagebrush posted:i'm assuming he means "surprisingly cheap!" like "well, it used to cost you $100,000 a wafer, now it's only $10,000" well yeah basically. a surprising number of people still think custom ASICs are like 250k+ when you can get a whole bunch for low 5-digits or very small runs for 4-digits, maybe even 3 if you're okay with crap processes and have loads of time to spare (but probably still 4) Bloody fucked around with this message at 00:41 on Jan 29, 2014 |
|
#
?
Jan 29, 2014 00:19
|
|
|
suppose i wanted a single custom chip one time. we're talking just a couple grand maybe? is that price following a moore's law pattern? will i soon be able to print out a custom chip for pocket dollars?
|
|
#
?
Jan 29, 2014 01:45
|
|
|
Mathhole posted:suppose i wanted a single custom chip one time. we're talking just a couple grand maybe? i dunno i havent been aware of asic costs long enough to have a grasp of their trends
|
|
#
?
Jan 29, 2014 03:14
|
|
|
 that's the tiny breadboard . i ground off some but it's not plated and zero success soldering. i would be content with some form of glue or something that conducted to connect to it and connect across them all too. i'm not against squishing alu foil in there tbh but i know that's terrible
|
|
#
?
Jan 30, 2014 09:17
|
|
|
aag tables
|
|
#
?
Jan 30, 2014 09:50
|
|
|
echinopsis posted:
what is going on here, what are you trying to accomplish
|
|
#
?
Jan 30, 2014 09:57
|
|
|
i am trying to make an working board thing to make it easy to make up arduino projects. i have bolted the arduino uno to the board and those little breadboards are going to each be a source of power (12v, 5v etc) its just a way of giving me breadboard access to power easily. it might be moronic but this board is my project. when its finished or nearing it ill show u guys so u can get an idea of what i am trying to achieve. mainly its becvause the usb cable to the arduino was so big and heavy i found it moved the board if i moved the laptop for example coz everything was just sitting on the table. i have gotten a wooden cutting board and am using that and evertything gets bolted/fixed to it and nothing will move 
|
|
#
?
Jan 30, 2014 10:02
|
|
|
uh, breadboards have two rails down each side specifically for this purpose, you know? can't you just plug the power from the arduino 5V and GND pins into the breadboard side rails and call it a day? if you really need to get power to the little breadboard blocks, just buy some headers  and solder to those and stick it in the board and accept that you'll lose one row. you would still have, like, 20 holes left, that's plenty for any reasonable project
|
|
#
?
Jan 30, 2014 10:23
|
|
|
well i don't want to draw current that i don't need to from the arduino and my small beard board doesn't have rails your idea is sensible i'm sure but i'm trying to be *unique* here and i have an idea in my head and i need to complete it i think
|
|
#
?
Jan 30, 2014 10:29
|
|
|
what's the power supply that you're going to be tying into the arduino? and regardless, it's a much better idea to like put some female banana jacks on the top of the thing you're building this on, hook those up to the 5v or whatever, then get a banana plug and solder it to the 5x male headers and use that "patch cord" when you need power to your mini breadboards. if it's a prototyping system it should be as modular as you can make it
|
|
#
?
Jan 30, 2014 10:32
|
|
|
a pc power supply and those beard boards wouldn't be directly connected, i have this 5 point plug that the power supply plugs into the board with i might have to go with your suggestion anyway simply to make it work
|
|
#
?
Jan 30, 2014 10:35
|
|
|
 this is kind of the idea. that power supply has a plug which will plug onto the board giving 12v,5v,3.3v,ground and the power-supply-on lead too (so i can switch the power supply on via the board, i will install a switch) and then ideally those little coloured bread boards will have respective voltages going to them, from the back. i intend to groove out the back of the board so a lot of this wiring and etc is under the board. that way, if i want 5v, i just use a patch cable from the 5v bread board to where i need it. same with other voltages. echinopsis fucked around with this message at 10:42 on Jan 30, 2014 |
|
#
?
Jan 30, 2014 10:39
|
|
|
im pretty baby here. im very unlikely to make real projects, i never have the patience nor actual project to make. just like me loving around in 3d rendering or ableton, i get simple retard joy from the fuckery. from hooking up an lcd matrix and making it say something. maybe one day it will be more, but curently my project is this board itself
|
|
#
?
Jan 30, 2014 10:44
|
|
|
dont electrocute yourself echopenis
|
|
#
?
Jan 30, 2014 10:51
|
|
|
for a second a thought you called me electropenis and that would be so grat
|
|
#
?
Jan 30, 2014 11:10
|
|
|
i called you echidna penis once but i don't think anyone noticed
|
|
#
?
Jan 30, 2014 11:42
|
|
|
death by arduino
|
|
#
?
Jan 30, 2014 11:50
|
|
|
echinopsis posted:for a second a thought you called me electropenis and that would be so grat i'll regret this forever now
|
|
#
?
Jan 30, 2014 11:52
|
|
|
Trig Discipline posted:i called you echidna penis once but i don't think anyone noticed yours is a good one though. thoughtful
|
|
#
?
Jan 30, 2014 11:56
|
|
|
echinopsis posted:i notice every time someone misspells my name. does no one respect cactus genera anymore? only today i notice you are not in fact called echopenis
|
|
#
?
Jan 30, 2014 12:17
|
|
|
coffeetable posted:only today i notice you are not in fact called echopenis yes its electropenis
|
|
#
?
Jan 30, 2014 12:31
|
|
|
|
| # ? Jun 3, 2023 09:37 |
|
|
sonarschlong
|
|
#
?
Jan 30, 2014 12:35
|
|
