- Rockker
- Nov 17, 2010
-
|
I started putting together an unraid box and I've got a old drive that showed a ton of errors like this during a preclear:
print_req_error: I/O error, dev sdf, sector 36152
Buffer I/O error on dev sdf, logical block 4519, async page read
so I started a badblocks and the terminal just started scrolling with the blocks that were reported bad
But smartctl shows the health status as OK ? Is it because the self test didn't finish or something? Currently trying a long test. I checked the drive on different cables (that I had known good drives already running on) with the same results to rule out a cabling issue
code:=== START OF INFORMATION SECTION ===
Vendor: HGST
Product: HUS726060AL5210
Revision: A519
Compliance: SPC-4
User Capacity: 6,001,175,126,016 bytes [6.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
LU is fully provisioned
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000cca24236fc9c
Serial number: xxxxxxxx
Device type: disk
Transport protocol: SAS (SPL-3)
Local Time is: Mon Jun 29 09:49:47 2020 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
Temperature Warning: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature: 31 C
Drive Trip Temperature: 85 C
Manufactured in week 18 of year 2015
Specified cycle count over device lifetime: 50000
Accumulated start-stop cycles: 15
Specified load-unload count over device lifetime: 600000
Accumulated load-unload cycles: 1396
Elements in grown defect list: 887
Vendor (Seagate Cache) information
Blocks sent to initiator = 96048286531584
Error counter log:
Errors Corrected by Total Correction Gigabytes Total
ECC rereads/ errors algorithm processed uncorrected
fast | delayed rewrites corrected invocations [10^9 bytes] errors
read: 0 18 0 18 203660 600.900 0
write: 0 717 0 717 71454 6002.081 252
verify: 0 0 0 0 56115 0.000 0
Non-medium error count: 1141
SMART Self-test log
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ]
Description number (hours)
# 1 Background short Failed in segment --> 6 1946 609656464 [0x3 0x5d 0x1]
# 2 Background short Failed in segment --> 6 1945 688655448 [0x3 0x5d 0x1]
# 3 Background short Failed in segment --> 6 1945 230788896 [0x3 0x5d 0x1]
Long (extended) Self-test duration: 49115 seconds [818.6 minutes]
|
#
¿
Jun 29, 2020 15:14
|
|
- Adbot
-
ADBOT LOVES YOU
|
|
#
¿
Apr 26, 2024 13:09
|
|