|
That's a great looking stand Hypnolobster. I'm at the point where I want to start building a brew stand and have looked at the Brewtus. What are the dimensions of yours? Is there anything you wish you would have done differently? added, not added? Do you still have the schematics? These questions area really for everyone who has built or owns a stand.
|
# ¿ Oct 11, 2011 20:38 |
|
|
# ¿ Apr 28, 2024 13:11 |
|
I'm currently building a brew stand and have the frame built. Now I would like to start getting the burners attached. The plan is for 3 burners, but I'm not exactly sure what I need to purchase in terms of regulators, etc. The plan is to use 3 of the 10in high pressure cast iron burners. I might be over thinking this, but if each burner can take 30psi do I need a regulator on the tank that will take 90psi? then 3 30psi regulators, 1 for each burner? Or do I just need 1 30psi regulator and ball valves... I'm starting to confuse myself. I would be forever grateful if someone would throw up a simple diagram for plumbing a 3 burner stand.
|
# ¿ Nov 29, 2011 20:21 |