|
|
#
?
Dec 19, 2020 01:06
|
|
|
|
| # ? Feb 28, 2021 22:19 |
|
|
*Bill Nye The Science Guy Theme Song* Fork! Fork! Fork! Fork! Fork! Fork! Fork! Fork!
|
|
#
?
Dec 19, 2020 01:18
|
|
|
mercenarynuker posted:Looks like a Corningware Home Select, based on that finish and the squared off-ish base. The ones made before 1998 had that prominent stamp on the back, later models had it it reversed (the letters were inset, not raised). Unfortunately the line was discontinued in 2009, as the market has been flooded by cheaper imitators and lower-grade steel from other countries. Your model looks more burnished than most, but that's not a surprise if this is a thrift-store cast-off. Something to be aware of, the top bit (the tines and the, uh, scoop?) had a bad habit of flattening out and then breaking over time, so the likelihood of finding replacements, let along a full set, will be difficult. You might be able to find some on eBay or something, going rate should probably be no more than a buck per utensil, but I'd be frankly surprised if they were even that high. Shipping will probably be more. One thing to keep an eye on is that these are, superficially, very similar to Target's Threshold Kayden style, so it may be worthwhile to showroom one of those at your local Target in lieu of scouring sites hoping for orphan matches 
|
|
#
?
Dec 19, 2020 01:21
|
|
|
goddamn
|
|
#
?
Dec 19, 2020 01:32
|
|
|
I appreciate you mercenarynuker
|
|
#
?
Dec 19, 2020 01:39
|
|
|
somethingawful is good, sometimes
|
|
#
?
Dec 19, 2020 01:58
|
|
|
Incredible
|
|
#
?
Dec 19, 2020 02:51
|
|
|
I am in loving awe.
|
|
#
?
Dec 19, 2020 03:11
|
|
|
pmchem posted:May as well put a fork in this one.
|
|
#
?
Dec 19, 2020 03:18
|
|
|
|
|
#
?
Dec 19, 2020 03:21
|
|
|
We need a silverware thread or something wtf
|
|
#
?
Dec 19, 2020 03:25
|
|
|
buttchugging adderall posted:I am in forking awe.
|
|
#
?
Dec 19, 2020 03:50
|
|
|
|
|
#
?
Dec 19, 2020 03:56
|
|
|
I never knew I wanted to learn literally everything about forks until now holy poo poo
|
|
#
?
Dec 19, 2020 04:13
|
|
|
Like I should know we have some people with super specific knowledge given I'm the car mod, but that's still loving impressive. 
|
|
#
?
Dec 19, 2020 04:22
|
|
|
mercenarynuker posted:Looks like a Corningware Home Select, based on that finish and the squared off-ish base. The ones made before 1998 had that prominent stamp on the back, later models had it it reversed (the letters were inset, not raised). Unfortunately the line was discontinued in 2009, as the market has been flooded by cheaper imitators and lower-grade steel from other countries. Your model looks more burnished than most, but that's not a surprise if this is a thrift-store cast-off. Something to be aware of, the top bit (the tines and the, uh, scoop?) had a bad habit of flattening out and then breaking over time, so the likelihood of finding replacements, let along a full set, will be difficult. You might be able to find some on eBay or something, going rate should probably be no more than a buck per utensil, but I'd be frankly surprised if they were even that high. Shipping will probably be more. One thing to keep an eye on is that these are, superficially, very similar to Target's Threshold Kayden style, so it may be worthwhile to showroom one of those at your local Target in lieu of scouring sites hoping for orphan matches fork
|
|
#
?
Dec 19, 2020 04:24
|
|
|
gabel
|
|
#
?
Dec 19, 2020 04:35
|
|
|
goddamn man
|
|
#
?
Dec 19, 2020 04:50
|
|
|
lisa...i would like to buy your fork
|
|
#
?
Dec 19, 2020 04:59
|
|
|
|
|
#
?
Dec 19, 2020 05:07
|
|
|
mercenarynuker posted:Looks like a Corningware Home Select, based on that finish and the squared off-ish base. The ones made before 1998 had that prominent stamp on the back, later models had it it reversed (the letters were inset, not raised). Unfortunately the line was discontinued in 2009, as the market has been flooded by cheaper imitators and lower-grade steel from other countries. Your model looks more burnished than most, but that's not a surprise if this is a thrift-store cast-off. Something to be aware of, the top bit (the tines and the, uh, scoop?) had a bad habit of flattening out and then breaking over time, so the likelihood of finding replacements, let along a full set, will be difficult. You might be able to find some on eBay or something, going rate should probably be no more than a buck per utensil, but I'd be frankly surprised if they were even that high. Shipping will probably be more. One thing to keep an eye on is that these are, superficially, very similar to Target's Threshold Kayden style, so it may be worthwhile to showroom one of those at your local Target in lieu of scouring sites hoping for orphan matches incredible
|
|
#
?
Dec 19, 2020 05:33
|
|
|
I'm here to be counted among the witnesses.
|
|
#
?
Dec 19, 2020 06:16
|
|
|
This loving forum sometime. Mercury, seriously, how the gently caress did you know all of that?
|
|
#
?
Dec 19, 2020 06:48
|
|
|
SalTheBard posted:This loving forum sometime. Mercury, seriously, how the gently caress did you know all of that? He found the legendary attuning fork
|
|
#
?
Dec 19, 2020 06:55
|
|
|
SalTheBard posted:This loving forum sometime. Mercury, seriously, how the gently caress did you know all of that? Perhaps he cooked and ate the Salmon of Knowledge?
|
|
#
?
Dec 19, 2020 07:06
|
|
|
CobwebMustardseed posted:Front of fork: These are the forks my parents have 
|
|
#
?
Dec 19, 2020 07:14
|
|
|
Rarity posted:These are the forks my parents have You have to elaborately heist the forks from them and sell them to OP.
|
|
#
?
Dec 19, 2020 07:17
|
|
|
gonna come clean here: i have a favorite fork too.
|
|
#
?
Dec 19, 2020 07:31
|
|
|
mercenarynuker posted:Looks like a Corningware Home Select, based on that finish and the squared off-ish base. The ones made before 1998 had that prominent stamp on the back, later models had it it reversed (the letters were inset, not raised). Unfortunately the line was discontinued in 2009, as the market has been flooded by cheaper imitators and lower-grade steel from other countries. Your model looks more burnished than most, but that's not a surprise if this is a thrift-store cast-off. Something to be aware of, the top bit (the tines and the, uh, scoop?) had a bad habit of flattening out and then breaking over time, so the likelihood of finding replacements, let along a full set, will be difficult. You might be able to find some on eBay or something, going rate should probably be no more than a buck per utensil, but I'd be frankly surprised if they were even that high. Shipping will probably be more. One thing to keep an eye on is that these are, superficially, very similar to Target's Threshold Kayden style, so it may be worthwhile to showroom one of those at your local Target in lieu of scouring sites hoping for orphan matches give dis guy a fork shaped plat icon
|
|
#
?
Dec 19, 2020 09:05
|
|
|
When I was a kid I had a favorite fork. Now all of my silverware is either from Ikea or the restaurant I used to work at. 
|
|
#
?
Dec 19, 2020 09:11
|
|
|
JOHN CENA posted:give dis guy a fork shaped plat icon
|
|
#
?
Dec 19, 2020 09:28
|
|
|
I feel like scales just fell away from my eyes and now I can see a whole world of fork knowledge heretofore unknown to me
|
|
#
?
Dec 19, 2020 09:42
|
|
|
|
|
#
?
Dec 19, 2020 11:16
|
|
|
goldmine.
|
|
#
?
Dec 19, 2020 11:27
|
|
|
JOHN CENA posted:give dis guy a fork shaped plat icon
|
|
#
?
Dec 19, 2020 11:33
|
|
|
JOHN CENA posted:give dis guy a fork shaped plat icon
|
|
#
?
Dec 19, 2020 14:51
|
|
|
|
|
#
?
Dec 19, 2020 14:52
|
|
|
JOHN CENA posted:give dis guy a fork shaped plat icon never has a forums poster been more deserving
|
|
#
?
Dec 19, 2020 17:16
|
|
|
mercenarynuker posted:Looks like a Corningware Home Select, based on that finish and the squared off-ish base. The ones made before 1998 had that prominent stamp on the back, later models had it it reversed (the letters were inset, not raised). Unfortunately the line was discontinued in 2009, as the market has been flooded by cheaper imitators and lower-grade steel from other countries. Your model looks more burnished than most, but that's not a surprise if this is a thrift-store cast-off. Something to be aware of, the top bit (the tines and the, uh, scoop?) had a bad habit of flattening out and then breaking over time, so the likelihood of finding replacements, let along a full set, will be difficult. You might be able to find some on eBay or something, going rate should probably be no more than a buck per utensil, but I'd be frankly surprised if they were even that high. Shipping will probably be more. One thing to keep an eye on is that these are, superficially, very similar to Target's Threshold Kayden style, so it may be worthwhile to showroom one of those at your local Target in lieu of scouring sites hoping for orphan matches I'm in awe
|
|
#
?
Dec 19, 2020 17:18
|
|
|
|
| # ? Feb 28, 2021 22:19 |
|
|
|
|
#
?
Dec 19, 2020 17:41
|
|
