|
Oh, are we having this conversation now? Cool. Please, tell us more about you exploits with tiny little girls.
|
# ? Nov 7, 2017 04:34 |
|
|
# ? Apr 28, 2024 14:20 |
|
Krakkles posted:Oh, are we having this conversation now? Cool. Please, tell us more about you exploits with tiny little girls. She's 27. She's just like a size 2 or something.
|
# ? Nov 7, 2017 05:05 |
|
yeah guys I totally crush mad pussy in the 'stang too *flexes*
|
# ? Nov 7, 2017 05:08 |
|
Can we just agree that every mustang owner has slayed enourmous amounts of tail and move on please?
|
# ? Nov 7, 2017 10:50 |
|
I haven't
|
# ? Nov 7, 2017 12:00 |
|
Adiabatic posted:move on please
|
# ? Nov 7, 2017 14:45 |
|
Adiabatic posted:What an rear end in a top hat
|
# ? Nov 7, 2017 15:28 |
|
I’m hearing a rattle on the highway in my S550 under the passenger floor. -Only at highway speeds -Revving/neutral/coasting doesn’t change it -Comes and goes as the wind blows across my car -Happens on smooth road -Kind of like a tin can sound? Does this exhaust have some kind of heat shielding that could be blowing around? It sounds 100% aerodynamic and not so much power plant, but I’m no expert.
|
# ? Nov 7, 2017 18:04 |
|
Sounds like heat shielding. Poke at it with a stick until you find the offending part.
|
# ? Nov 7, 2017 19:26 |
|
I guess nothing further has come of that whole "GT500 front wheel part that has a hole for a driveshaft" thing?
|
# ? Nov 7, 2017 21:45 |
|
People often make mountains out of molehills....
|
# ? Nov 8, 2017 00:45 |
|
/tear
|
# ? Nov 12, 2017 19:46 |
|
Meanwhile...
vote_no fucked around with this message at 21:22 on Nov 12, 2017 |
# ? Nov 12, 2017 19:58 |
|
Oh I've been there, and I'm thoroughly jealous. If this was a regular gt and not a mach 1 I'd probably just drive it.
|
# ? Nov 12, 2017 20:57 |
|
I keep a snow shovel in the trunk of my Bullitt..
|
# ? Nov 13, 2017 03:07 |
|
vote_no posted:Meanwhile... Mines just getting covered in 40 degree rain At least it’ll clean it a little. I stopped washing it this month because it’s been so crappy out.
|
# ? Nov 13, 2017 03:26 |
|
I think I've washed my car 3 times tgis summer. It rained once a week every week all summer long.
|
# ? Nov 13, 2017 03:30 |
|
I drove 800 miles up and back down Florida this last week Gonna drive all winter on summer tires too.
|
# ? Nov 13, 2017 03:36 |
|
Getting my snow tires installed tomorrow. Edit: Bring the snow I am ready. Remote start finally going to come in handy. Elephanthead fucked around with this message at 22:04 on Nov 14, 2017 |
# ? Nov 13, 2017 17:01 |
|
Mine went on Sunday. Enjoying the fact I can now break traction in 3rd in a straight line. edit: Here's a dirty butt shot to show the stance on the stock rims, I put 8mm spacers in so that they don't look super tucked and tiny. Decent improvement from something so minor. GabbiLB fucked around with this message at 22:10 on Nov 13, 2017 |
# ? Nov 13, 2017 20:49 |
|
Any early Fox body guys out there? Helping the old man find a rebuild kit for his carb (accelerator pump diaphragm seems shot), and we're just trying to confirm we got the right carb before ordering a kit, as we need to order from the US, much easier than finding anything locally. This look like the stock 2bbl carb for a 1979 Fox with a 5.0? And if it is, this seems to be the kit I need? https://www.summitracing.com/int/parts/smp-1551/overview/
|
# ? Nov 16, 2017 07:15 |
|
Looks like a Holley 2300 or similar (basically half a 4-barrel). Any Holley accelerator pump should work, and yeah that power valve should fit everything too. I'm less sure about the needle and seat, but they look right. I'm surprised you've got nothing locally, because pretty much any Holley should use those parts, so I'd expect them to be available everywhere. Disclaimer: I don't know Mustangs too well, so I'm far from an expert on this subject. I just know my 1960 F100 shares carburetor parts with my 2016 BG Speed Demon.
|
# ? Nov 16, 2017 08:01 |
|
OK, thanks a lot, that gives me more leads. Holley stuff I can find for sure, although it still means finding a specialist parts outfit, none of our chain auto stores usually stock anything like that. Also markup can be huge, for small things like this I can buy it in the US (from Amazon even) and ship it down to NZ and still be half the price local outfits are gunna charge me.
|
# ? Nov 17, 2017 05:26 |
|
BuckyDoneGun posted:OK, thanks a lot, that gives me more leads. Yeah those parts should fit a Holley 2300, 4150, 4160, probably also the single-barrels too. If it's just a torn diaphragm, you can probably save some money over buying a whole kit. Especially because you don't need to take anything else apart to change it. But if you're eating international shipping anyway, an extra few bucks for a full kit with gaskets might make more sense; you'll have spares for next time.
|
# ? Nov 17, 2017 05:30 |
|
I did some research, and it looks like it's actually a Motorcraft/Autolite 2150. Very similar to the Holley, and probably has some parts interchange, but not nearly as Lego as I was saying earlier. I'm not confident enough that they're the same to have you order some stuff across the globe, so I guess it's best to get a kit that says it's right. I think this is the appropriate one: https://www.summitracing.com/parts/smp-1430/ That sure does look like a Holley accelerator pump and power valve, though.
|
# ? Nov 17, 2017 05:46 |
|
So I had my Mustang shipped to Italy by the Army, and it's been a blast to drive here. The roads are narrow, and finding parking is often outrageously hard, but on the other hand, driving on the curvy roads is a sheer pleasure. I love this picture. It's like a caricature of Europe versus America. Taken downtown Vicenza, Italy.
|
# ? Nov 19, 2017 20:58 |
|
Vahakyla posted:So I had my Mustang shipped to Italy by the Army, and it's been a blast to drive here. The roads are narrow, and finding parking is often outrageously hard, but on the other hand, driving on the curvy roads is a sheer pleasure. I can hear the eagles crying across the pond. This is really kinda cool.
|
# ? Nov 20, 2017 20:48 |
|
More of the pony in Italy. Right next to my house, front of the local school my son goes to. It's pretty goofy to drive a Mustang and see a roadsign "Venezia 45 km"
|
# ? Nov 24, 2017 13:30 |
|
Please keep posting pics, I love the combination of Italy and new edge.
|
# ? Nov 24, 2017 21:16 |
|
Rolo posted:Mines just getting covered in 40 degree rain I went on work travel to Florida in late October, figured I'd put winter wheels on before I left because it'd be cold in late November when I got back and I wouldn't want to be changing wheels when it's freezing out. 50 degrees out today. Might have jumped the gun a little on those wheels.
|
# ? Nov 24, 2017 22:22 |
|
Do you have lights in your rear bumper underneath the mustang lettering? Also what do you have for fogs? It almost looks like one of those aftermarket accent strips, or its just the angle of the picture. I felt pretty cool driving my mustang around in Canada until I ended up seeing like 3 of them. I guess its a lot easier to import them there than it is Italy. edit: Nevermind. Always check thread history. Vahakyla posted:It's a Premium Convertible 5-speed manual V8.
|
# ? Nov 25, 2017 02:56 |
|
Probably one of the last times I'll have the car out this season. https://www.youtube.com/watch?v=DO2VbwP8N1M
|
# ? Nov 26, 2017 00:04 |
|
I just had to use my tiny scissor jack from my 03 to lift my moms Nissan Rogue after hers broke while putting on a spare. We may need to fix or repair daily, but at least they give us the tools to do it
|
# ? Nov 27, 2017 23:43 |
|
The '03 is gone; replaced by a '17 F150 with the little ecoboost. It's pretty hilarious that my truck is noticeably faster than my Mustang. The '67 is in my brother-in-law's resto shop being worked on when he has time. I anticipate its completion sometime near the heat death of the universe.
|
# ? Nov 28, 2017 01:20 |
|
frozenphil posted:The '03 is gone; replaced by a '17 F150 with the little ecoboost. It's pretty hilarious that my truck is noticeably faster than my Mustang.
|
# ? Nov 28, 2017 05:03 |
|
Lol I too swapped my mustang with a truck. Grabbed a 2015 F150 5.0 and lowered my payments. It is not fast
|
# ? Nov 28, 2017 14:56 |
|
Mustang Thread: Wherein we all drive F150s now.
|
# ? Nov 28, 2017 22:10 |
|
Digital_Jesus posted:Mustang Thread: Wherein we all drive F150s now that are faster than our old Mustangs Aluminum construction is a hell of a thing.
|
# ? Nov 29, 2017 15:44 |
|
BigPaddy posted:Aluminum construction is a hell of a thing. Hey now some of us have fast modern ones.
|
# ? Nov 30, 2017 11:53 |
|
|
# ? Apr 28, 2024 14:20 |
|
BigPaddy posted:Aluminum construction is a hell of a thing. A regular cab, short bed, two wheel drive F150 with the 3.5 ecoboost weighs 4050lbs and has 375 horsepower and 470 lb-ft. That's not far off a 2003 Cobra in an F150. What a time to be alive.
|
# ? Nov 30, 2017 12:11 |