|
The Sexual Shiite posted:Nothing’s broken, that pin-screw looks like it’ll screw right back in, but I’m not sure of the best way to get it screwed in. Is it actually a screw, and not a force-fit pin with a knurl? Wild. Ok, well, there's a couple things I think you could do: You could drill two pinholes in the head and screw it in using a pair of fine needlenose pliers or a c-clip plier (if you have one), or you could hotglue it to a dowel or an allen key, drive it in with that, and take the glue off once it's in. Isopropyl alcohol loosens hot glue and should be relatively friendly to toy plastics (unlike acetone).
|
# ? Apr 17, 2019 00:10 |
|
|
# ? Jun 5, 2024 09:34 |
|
Well hopefully you can fix it! That's too drat expensive to just have breaking due to fiddlin'. In other news, Target had a $25 off $100 coupon and I am a weak-willed man: Really only wanted Sixgun (badly) but also found some Botbots I didn't have yet... and Starscream and Soundwave... and then Prowl was there, too... e: It was pretty funny watching my wife try to carefully pry open the flap on the botbots... "What is W9?" "I think that's 6M" "Ok, do you need 6M?" e2: TheDK fucked around with this message at 02:48 on Apr 17, 2019 |
# ? Apr 17, 2019 02:36 |
|
Thankfully I'll probably have a job again soon, so buying Transformers stuff won't be too much of a strain on my finances if I space it out properly
|
# ? Apr 17, 2019 03:28 |
|
drrockso20 posted:Thankfully I'll probably have a job again soon, so buying Transformers stuff won't be too much of a strain on my finances if I space it out properly Sixgun is amazing. Great Headsculpt.
|
# ? Apr 17, 2019 04:12 |
|
Another one.
|
# ? Apr 17, 2019 07:35 |
|
The MSJ posted:Another one. MP10's last hurrah?
|
# ? Apr 17, 2019 07:36 |
|
The MSJ posted:Another one. MP10GB is real but a website stole someone's digibash and used it as a stock image, which is what you posted. It won't look quite like that.
|
# ? Apr 17, 2019 07:41 |
|
TheDK posted:In other news, Target had a $25 off $100 coupon and I am a weak-willed man:
|
# ? Apr 17, 2019 12:44 |
|
Double dose of top-tier YT TF content today for subscribers, Thew has his Skytread review up, and Chris McFeely has The Basics on The DJD, should be interesting.
|
# ? Apr 17, 2019 16:47 |
|
BizarroAzrael posted:Double dose of top-tier YT TF content today for subscribers, Thew has his Skytread review up, and Chris McFeely has The Basics on The DJD, should be interesting. I guess you mean on Patreon
|
# ? Apr 17, 2019 17:07 |
|
Burkion posted:I guess you mean on Patreon Yeah. Thew has a one day delay ahead of free release, McFeely does three.
|
# ? Apr 17, 2019 17:10 |
|
BBTS is really taking their time with MP BW Megatron.
|
# ? Apr 19, 2019 03:43 |
|
Keldroc posted:BBTS is really taking their time with MP BW Megatron. I know.
|
# ? Apr 19, 2019 04:00 |
|
Making sure they don't have broken dicks. I've been selling off some stuff on Ebay since I'm trying to declutter, and I got a nice message from someone who bought an MP Wheeljack thanking me for selling it and it will be his first MP figure.
|
# ? Apr 19, 2019 05:27 |
|
I’m so glad I’ve preordered this gorgeous boy.
|
# ? Apr 19, 2019 07:16 |
|
Lol I picked up some series 2 botbots that just showed up at the store and for one of them, the conditioner bottle, the plate thing disguising their face was like melted or glued on to their face so I had to force it off with some tweezers and it ended up ripping a portion of the face's print off with it, gonna probably contact hasbro about that and also see if I can't get a replacement. Also, the ham hock one, hamurai, was one I was initially indifferent about but I found out that the bone on his head actually comes out to reveal a sword and now I'm miffed that he gets a cool sword and game over doesn't Can't find a good pic of the toy with the sword though, and meanwhile game over's art has this sword and I'm just thinkin "drat that sucks, I want my stupid game controller transformer to have a circuit board sword"
|
# ? Apr 19, 2019 08:00 |
|
I'm kind of sad today so I'm trying to occupy my brain. Who knew Prime was a member of the GLC?
|
# ? Apr 19, 2019 14:51 |
|
Talking of Botbots, I’ve seen the single pack Series 2 ones in Target here in FL. I couldn’t see any ID marks on the back this time. :/
|
# ? Apr 19, 2019 15:25 |
|
The_Doctor posted:Talking of Botbots, I’ve seen the single pack Series 2 ones in Target here in FL. I couldn’t see any ID marks on the back this time. :/ Yeah there’s an online guide for them like series one but in Australia at least there’s NO serial numbers so I’m like uhhh Unless you get a fresh pack you’re stuffed.
|
# ? Apr 19, 2019 16:22 |
|
Ok, after closer examination, it is definitely a screw, not a knurl on masterpiece megatron. It’ll screw back in, just gotta get something to hold to it. Instead of glue, I think I’m going to try doing it with a new stock pencil eraser.
|
# ? Apr 19, 2019 16:33 |
|
This was fun to do. I have the Megatron preordered and now I think I'll order the Starscream as well.
|
# ? Apr 19, 2019 16:33 |
|
Rhyno posted:This was fun to do. I have the Megatron preordered and now I think I'll order the Starscream as well. Gundam are a natural extension of my TF love and a great timesink if that kind of kit interests you. Since you seem to love big chonks, I’d recommend an MG Zaku 2.0 (any of that mold) or the RG Sazabi.
|
# ? Apr 19, 2019 16:39 |
|
I did some Gundam kits yeeeaaaars ago and enjoyed them. We'll see if the itch remains after the next TF kit.
|
# ? Apr 19, 2019 16:44 |
|
Looks good, I must remember to order some with my next Gunpla order. A reminder to check out the Brave series with its shared DNA as well. For anyone to whom it means anything, I'm doing a customised GNX influenced by Tarn.
|
# ? Apr 19, 2019 16:49 |
|
I just built the Super Mini-Pla Shogun Megazord, which was very fun.
|
# ? Apr 19, 2019 17:05 |
|
Rhyno posted:I'm kind of sad today so I'm trying to occupy my brain. Actually I'm pretty sure there was an aborted IDW/DC crossover event where Optimus actually was supposed to be the Green Lantern of Cybertron. There was artwork made for it I think.
|
# ? Apr 19, 2019 18:40 |
|
Steve Vader posted:Actually I'm pretty sure there was an aborted IDW/DC crossover event where Optimus actually was supposed to be the Green Lantern of Cybertron. There was artwork made for it I think.
|
# ? Apr 19, 2019 18:53 |
|
Now I'm sad.
|
# ? Apr 19, 2019 19:15 |
|
The_Doctor posted:Talking of Botbots, I’ve seen the single pack Series 2 ones in Target here in FL. I couldn’t see any ID marks on the back this time. :/ Asphyxious posted:Yeah there’s an online guide for them like series one but in Australia at least there’s NO serial numbers so I’m like uhhh I dunno if maybe it's just different in Australia or Florida but here in PA they had numbers, but they weren't weirdly embossed or engraved by the hasbro logo, they were very neatly printed on the back almost right underneath the hook they use to hang them on shelf pegs
|
# ? Apr 19, 2019 20:18 |
|
FirstAidKite posted:I dunno if maybe it's just different in Australia or Florida but here in PA they had numbers, but they weren't weirdly embossed or engraved by the hasbro logo, they were very neatly printed on the back almost right underneath the hook they use to hang them on shelf pegs Ah, I was looking in the wrong place for the code it seems. I'll go back and have a look later.
|
# ? Apr 19, 2019 20:28 |
|
Is there a recommended pin removal tool? My Double Evil has a backwards panel that's pinned in place.
|
# ? Apr 19, 2019 21:36 |
|
Speaking of pins. Does it seem like Siege as a line has a lot of spots that feel conspicuously like they should have been pinned and may be had originally been planned to? The Starscream chest is an obvious one but I noticed a couple others that seemed like weird choices. On Chromia the blue plastic piece on the front of her pelvis is sorta loosely on there. It can be moved but it serves no purpose for posability or transformation. It feels sorta like a piece that would have been pinned or otherwise fixed in place. Ironhide's leg panels kinda give me that feeling too. Cost cutting measure? Robot toy nerd paranoia? Edit: Oh, I guess I need to try this to fix Ironhide. https://www.playwithphotography.com/2019/03/15/fixing-transformers-siege-ironhides-pop-off-panels/ Anyone else give it a go? DisposableHero fucked around with this message at 22:42 on Apr 19, 2019 |
# ? Apr 19, 2019 22:40 |
|
Rhyno posted:Is there a recommended pin removal tool? My Double Evil has a backwards panel that's pinned in place. https://www.homedepot.com/p/TEKTON-3-32-in-Roll-Pin-Punch-66063/205820422?MERCH=REC-_-PIPHorizontal2_rr-_-206515512-_-205820422-_-N
|
# ? Apr 20, 2019 03:29 |
|
I tried using my tiny gauge punch but this fucker is stuck fast. Edit: Ocular Max Ravage preorders up at PSX, $71 shipped. I got my double OT check so I;m just gonna pull the trigger on the the four so I don't have to scramble in the future. Rhyno fucked around with this message at 08:27 on Apr 20, 2019 |
# ? Apr 20, 2019 05:30 |
|
FirstAidKite posted:I dunno if maybe it's just different in Australia or Florida but here in PA they had numbers, but they weren't weirdly embossed or engraved by the hasbro logo, they were very neatly printed on the back almost right underneath the hook they use to hang them on shelf pegs Oh poo poo this is actually the case! Nice one! For some reason some still didn’t have numbers but that might be printing errors. Number 23 had no number at all, but this was VERY helpful, thank you!
|
# ? Apr 20, 2019 08:41 |
|
Rhyno posted:I tried using my tiny gauge punch but this fucker is stuck fast.
|
# ? Apr 20, 2019 22:44 |
|
Rhyno posted:I tried using my tiny gauge punch but this fucker is stuck fast. Funny enough, I think the birds don't scale well and stuck with the ones that came with MP13, the Rumble/Ravage/Frenzy are so perfect though.
|
# ? Apr 21, 2019 03:11 |
|
Some Hasbro Taiwan marketing vids: https://www.youtube.com/watch?v=Ga4n0KOT-dk https://www.youtube.com/watch?v=hsjehTukj-Q
|
# ? Apr 21, 2019 06:12 |
|
sba posted:Funny enough, I think the birds don't scale well and stuck with the ones that came with MP13, the Rumble/Ravage/Frenzy are so perfect though. Yeah the birds are way too big. Nice figures of the characters but they look ridiculous with MP-13.
|
# ? Apr 21, 2019 07:30 |
|
|
# ? Jun 5, 2024 09:34 |
|
So my detolf is still shaking a bit, and my TFs slowly slide toward to front. I can't seem to do much about a bit of shake, so any suggestions on how to hold them in place, in a non-permanent way? E.g. are there any little transparent rubber pads I could use or something? They always slide in the one direction, so even if it's just something I can put in front of their feet I think that would do the job.
|
# ? Apr 22, 2019 12:00 |