|
WorldsStongestNerd posted:Yeah goddamn. Is this a serious post? Artisinal pigs only need sunlight, don't you know? E: gently caress me what a bad snipe. Have swedish OSHA as compensation. https://www.svt.se/nyheter/lokalt/norrbotten/nordkalkolyckan-i-klockslag Potrzebie fucked around with this message at 17:22 on Dec 29, 2019 |
# ? Dec 29, 2019 17:17 |
|
|
# ? Apr 27, 2024 19:03 |
|
Potrzebie posted:Artisinal pigs only need sunlight, don't you know? When putting out a lime oven with water, make sure you stand in an area facing the opening that has no emergency showers
|
# ? Dec 29, 2019 19:35 |
|
CommieGIR posted:Unfortunately, we need to get far away from methane release of any sort. The whole point is that you're going to capture the methane and burn it instead of releasing it into the environment.
|
# ? Dec 29, 2019 21:53 |
|
Clean getaway, not did they stick the landing? The Russian judge won't be kind.
|
# ? Dec 29, 2019 23:37 |
|
Jabor posted:The whole point is that you're going to capture the methane and burn it instead of releasing it into the environment. We're kind of turning the page on how much we can do with mitigation and how much we need to literally upend the supply chain for cradle to grave management of pollutants including cutting back on farmed meat. And to get on one of my favorite soapboxes that in a lottery winning world I'd probably shop around grad schools: there's some reevaluation of recycling supply chains needed to control for emissions over raw material saving. We aren't going to see peak much of anything before the ecosystems as we know them collapse. Like paper products probably deserve to be hermetically sealed in the ground instead of recycled to add price pressures to paper goods while sequestering carbon.
|
# ? Dec 30, 2019 00:33 |
|
|
# ? Dec 30, 2019 00:35 |
https://i.imgur.com/SAd0vPp.gifv
|
|
# ? Dec 30, 2019 00:42 |
|
big thanks to CSPAM for thisGATOS Y VATOS posted:*crashes through wall* DID SOMEBODY SAY DEMON CORE?!?!
|
# ? Dec 30, 2019 00:44 |
|
So does this play "Mary Had a Little Lamb" or something?
|
# ? Dec 30, 2019 00:48 |
|
shame on an IGA posted:big thanks to CSPAM for this Just noticed closed captions work in English.
|
# ? Dec 30, 2019 01:09 |
|
Yeah, it squealed real loud for a while, I think they were just breaking in. After that it had some kind of grinding noise, my brother said a rock must have gotten kicked up in there. Anyway, the pedal is real soft now I need you to go in there and adjust my brake pedal back so it's stiffer again. What do you mean new brakes?! I just had them done, you drat ripoff artist, I'm going to report you to corporate and the bbb and the ftc!!!
|
# ? Dec 30, 2019 01:10 |
|
shame on an IGA posted:big thanks to CSPAM for this https://www.youtube.com/watch?v=uNZnfbl_Z7M https://www.youtube.com/watch?v=Od_RTVirPCo Edit: https://www.youtube.com/watch?v=Eyl3WQCttQ8 Cable Guy fucked around with this message at 04:08 on Dec 30, 2019 |
# ? Dec 30, 2019 04:04 |
|
Ganbare demoncore-kun e: oh god there's more than the initial more a kitten fucked around with this message at 04:09 on Dec 30, 2019 |
# ? Dec 30, 2019 04:07 |
|
I love the demon core, the history, etc. Wish there were stickers or something of demon core-kun.
|
# ? Dec 30, 2019 04:16 |
|
Queen Combat posted:
Good news. There are. (Don't have the link but they're goon made) You may want to check the dangerous chemistry thread.
|
# ? Dec 30, 2019 05:14 |
|
I mean of demon core-kun from those videos, whoops (the image is a link to the shirts/stickers I made of the "I love science" ones).
|
# ? Dec 30, 2019 05:21 |
|
Queen Combat posted:I mean of demon core-kun from those videos, whoops (the image is a link to the shirts/stickers I made of the "I love science" ones). https://www.youtube.com/watch?v=vOnbng4UlwE&t=1255s
|
# ? Dec 30, 2019 06:01 |
|
somebody forgot to chock the wheels?
|
# ? Dec 30, 2019 07:50 |
|
Brute Squad posted:somebody forgot to chock the wheels?
|
# ? Dec 30, 2019 07:58 |
New video from our favourite bridgecam: https://www.youtube.com/watch?v=jdwleG_xFwI
|
|
# ? Dec 30, 2019 08:32 |
|
https://i.imgur.com/V0kTmjt.mp4
|
# ? Dec 30, 2019 12:03 |
|
^ that's why before you start cutting you plan out your escape route.
|
# ? Dec 30, 2019 12:49 |
|
Aaand the decade ends with a bang in Finland as a crane boom falls on construction side, road and barracks. https://www.is.fi/kotimaa/art-2000006357730.html Amazingly no casualties.
|
# ? Dec 30, 2019 13:02 |
|
Got one from my work. I'm in Afghanistan overseeing generator overhaul contractors through some local national safety guys. Just after Christmas one of our contractors needed to move a generator across their shop yard. They did this by renting a lovely undersized crane, planning nothing, documenting nothing, providing no secure footing under the crane, and then physically dragging the generator sideways across the yard with the crane using I think the hoist point on the engine block in the generator housing. Even dragging the generator sideways they still had enough force on the crane to cause to to twist enough that the outside outriggers were unloading and the outside tires started twisting off the ground. I sent the contractor and asked them to please never do that again and I got an apology/non-apology that included the following items. Crane operator not wearing a hard hat while leaning out of the cab with the door open and the boom up: "The crane operator doesn't need a hard hat because there was no overhead threat since the crane was so badly underrated that it couldn't actually lift the load overhead." In regards to the report that our safety guys sent. "Yes the crane was dangerously unstable, but why didn't your safety guys stop us? Isn't that his job? Also, he quoted the wrong safety regulation telling us that cranes must be operated on stable footing. We think you need to train them better." (I did ask my guy to never do take pictures like this again or at least take them from across the street or anywhere but close to this poo poo) We have a firm fixed price contract stating that the contractor SHALL comply with all included safety regulations with a crisp contractor signature right at the top and price negotiations took several months. "if we make our Afghan subcontractors conform to the these safety requirements it will raise the cost of the contract!" -Zydeco- fucked around with this message at 14:02 on Dec 30, 2019 |
# ? Dec 30, 2019 14:00 |
|
A local one from this weekend: Crane topples onto house Tree removal didn't go as planned. Jump to :55 in the video and you can see it happen.
|
# ? Dec 30, 2019 14:11 |
|
AFewBricksShy posted:A local one from this weekend: Should have got the liftbiggerstuff instead.
|
# ? Dec 30, 2019 16:51 |
|
Pickled Tink posted:New video from our favourite bridgecam: It's almost musical
|
# ? Dec 30, 2019 16:52 |
|
Cojawfee posted:It's almost musical It reminds me of the video where a guy throws a dead fish onto an electric guitar and it plays the opening riff of Smells Like Teen Spirit. Blue Footed Booby fucked around with this message at 18:01 on Dec 30, 2019 |
# ? Dec 30, 2019 17:48 |
|
-Zydeco- posted:I sent the contractor and asked them to please never do that again and I got an apology/non-apology that included the following items. That's an impressive amount of brass neck "it's your fault for not stopping us"
|
# ? Dec 30, 2019 18:02 |
|
Chill Russians filming a gas station explosion: https://www.youtube.com/watch?v=DhPgUSsLfAg Not so chill Russians filming the very same: https://www.youtube.com/watch?v=JXYigGts0IA
|
# ? Dec 30, 2019 18:12 |
|
Blue Footed Booby posted:It reminds me of the video where a guy throws a dead fish onto an electric guitar and it plays the opening riff of Smells Like Teen Spirit. Would you possibly have a link to this?
|
# ? Dec 30, 2019 18:29 |
|
SelenicMartian posted:Chill Russians filming a gas station explosion: https://www.youtube.com/watch?v=EzHq8zsrOps
|
# ? Dec 30, 2019 18:37 |
|
https://i.imgur.com/im51fL4.mp4 A wind turbine went haywire here in Denmark yesterday, and they stopped it by firing rockets with ropes attached at it which then got tangled up in the machinery and slowed it down (full vid in the link) https://www.dr.dk/nyheder/indland/se-videoen-loebsk-vindmoelle-paa-mors-stoppet-med-noedraketter-og-reb#!/
|
# ? Dec 30, 2019 18:41 |
|
HelloIAmYourHeart posted:Would you possibly have a link to this? I tried, but I just can't find it. There are bands called Fish and Dead Fish, the former of which did a cover of Smells Like Teen Spirit. My google fu is insufficient.
|
# ? Dec 30, 2019 18:43 |
|
Winklebottom posted:https://i.imgur.com/im51fL4.mp4 If you are really skilled and patient, you can use your grappler to attach 3 cows to it and it'll still spin. Loved JC3
|
# ? Dec 30, 2019 18:49 |
|
Winklebottom posted:https://i.imgur.com/im51fL4.mp4 This is utterly wild lol
|
# ? Dec 30, 2019 19:14 |
|
175 kW, it was just a baby windmill. I don't think that would've worked on the 10-12MW behemoths they've been building nowadays. Also here's the alternate ending https://www.youtube.com/watch?v=CqEccgR0q-o
|
# ? Dec 30, 2019 19:20 |
|
Runaway wind turbines are fascinating. https://www.youtube.com/watch?v=sbCs7ZQDKoM
|
# ? Dec 30, 2019 19:21 |
|
|
# ? Dec 30, 2019 19:45 |
|
|
# ? Apr 27, 2024 19:03 |
|
It's funny how over time of seeing wildly unsafe things how even though this would absolutely 100% not be up to OSHA spec I'm like honestly it looks fine. Those barrels are strong, it's securely attached, he's not standing on the thing he's demolishing (!), the mounting has good control over height and orientation (he's not flapping around at the end of a cable, for example). There's even an extra hoop up higher on his chest, so his center of gravity should be below the railing. Honestly this looks more "handmade but actually pretty safe" more than the thread-standard "how did the person even live long enough to get a picture taken".
|
# ? Dec 30, 2019 20:02 |