|
I think I used to have a model Mercedes like that when I was a kid, not quite as detailed but still pretty fancy Sound on for this https://i.imgur.com/5jgmTTL.mp4
|
# ? Oct 4, 2022 19:25 |
|
|
# ? Apr 28, 2024 09:52 |
|
mobby_6kl posted:I think I used to have a model Mercedes like that when I was a kid, not quite as detailed but still pretty fancy
|
# ? Oct 4, 2022 22:32 |
GramCracker posted:Not sure if this goes here or not (I can move it if need be), our JDM Collection is now going live on BAT Those definitely belong here. NSXs are always super cool and as a teen I daydreamed of things like the integra type r and gti-r but despite being tantalisingly close they were always just out of reach.
|
|
# ? Oct 4, 2022 23:50 |
|
How fast do these guys go, adjusted for scale?
|
# ? Oct 5, 2022 02:56 |
|
You're not hearing the motors, that's what tiny 1/8 scale sonic booms sound like.
|
# ? Oct 5, 2022 03:25 |
|
GramCracker posted:Not sure if this goes here or not (I can move it if need be), our JDM Collection is now going live on BAT Unpopular opinion: wrong thread because I can't afford them (and I am angsty about people with more money than me speculating on cool cars that will never get driven). Cool cars tho
|
# ? Oct 5, 2022 06:28 |
|
We can assist with financing if needed.... Some Carrera GT porn for everyone's viewing pleasure: https://www.youtube.com/watch?v=h8GVKYPItkc
|
# ? Oct 5, 2022 16:25 |
|
MadScientistWorking posted:I feel bad for the other person because it looks like they slammed their car right into the curb. Well it's just like the real thing
|
# ? Oct 5, 2022 20:18 |
|
That's a decent little diecast. I have a 1/18 '70 Olds 442 W-30 from Lane Exact Detail (which I believe is Acme, now) that has opening doors, hood, and trunk, spare tire and jack, working steering and suspension, spinning driveshaft, correct underhood stickers, battery cables, and fuel, coolant, and brake line plumbing. It's pretty nice. I got it on eBay when I found it for like $75 instead of the normal $120+ they were at the time. $200+ now for the vintage ones. Newer castings labelled Acme are still over $100. Looks like "Danbury Mint" models are also actually made by Acme now, too. edit: it's my one "expensive" diecast, because I have a '70 Cutlass, albeit not a 442, much less a W-31. The rest of my stuff is Ertl and Muscle Machines, etc. edit again: GramCracker posted:We can assist with financing if needed.... Oof. That thing sounds great. Darchangel fucked around with this message at 22:50 on Oct 5, 2022 |
# ? Oct 5, 2022 22:10 |
|
I know this will tickle someone here: It's up for auction! https://modsandmiles.com/auction-details/?vuid=2009-Porsche-Cayenne-VNQ4L Current bid is $6200, reserve not met, though.
|
# ? Oct 6, 2022 23:15 |
|
Pretty good, considering this was on the side of the road for $4800 a few months ago
|
# ? Oct 7, 2022 00:42 |
|
https://twitter.com/popsyosh34/status/1577988929705447424?t=S68LK2yl-NeW5l95hl8jqA&s=19
|
# ? Oct 7, 2022 07:54 |
|
Olympic Mathlete posted:Fiat 500 with a Kawasaki ZX1400R Engine I would rather drive this than the new Z06
|
# ? Oct 7, 2022 07:58 |
|
Guinness posted:I would rather drive this than the new Z06 Objectively correct opinion
|
# ? Oct 7, 2022 12:16 |
|
Guinness posted:I would rather drive this than the new Z06 It is more fun to drive a slow car fast than a fast car slow, but its more fun than either to drive an insane car as best you can while screaming.
|
# ? Oct 7, 2022 17:57 |
|
Olympic Mathlete posted:https://twitter.com/popsyosh34/status/1577988929705447424?t=S68LK2yl-NeW5l95hl8jqA&s=19 look at all that room. needs a turbo
|
# ? Oct 7, 2022 19:36 |
|
What is under the center console of the new Corvette, if it's a mid engine rwd car In a FR configuration that space would understandably be used for the transmission/driveline tunnel, just seems like a massive waste of space to me; interior sucks Better than a GNX at least
|
# ? Oct 7, 2022 20:03 |
|
Hadlock posted:What is under the center console of the new Corvette, if it's a mid engine rwd car CPAP, O2 tank, fold up walker, etc.
|
# ? Oct 7, 2022 20:08 |
|
Guinness posted:I would rather drive this than the new Z06 If anyone is saying otherwise they need their head checking tbh.
|
# ? Oct 7, 2022 20:40 |
|
Hadlock posted:What is under the center console of the new Corvette, if it's a mid engine rwd car $5 says that's where the batteries go for the hybrid version, similar to how they did in the Volt. I also believe the gas models have two trunks because the front one will get used or at least encroached on by the front axle motor.
|
# ? Oct 7, 2022 22:14 |
|
AW11 MR2s put the fuel tank and misc cooling plumbing through the center tunnel. Less likely to get crushed by an untrained tech that way.
|
# ? Oct 7, 2022 22:39 |
|
The C8 has dual saddle style fuel tanks between the door and rear wheels, so I'm betting it's just coolant pipes for now, but yeah agree that's where batteries will go. The "trans tunnel" is also a major part of the structure. You can eliminate it, but would need bigger stronger sills which are harder to climb in and out of for old Boomers with dickey knees. Also normal people.
|
# ? Oct 7, 2022 23:01 |
|
cursedshitbox posted:AW11 MR2s put the fuel tank and misc cooling plumbing through the center tunnel. Less likely to get crushed by an untrained tech that way. Fiero's put the fuel tank there, and put the coolant pipes under the rocker panels where they were VERY likely to be crushed by an unfamiliar tech!
|
# ? Oct 8, 2022 00:16 |
|
First look at Adam Driver as Enzo in Michael Mann's Ferrari flick.
|
# ? Oct 8, 2022 00:36 |
|
BuckyDoneGun posted:First look at Adam Driver as Enzo in Michael Mann's Ferrari flick. Adam Driver looks like if you loaded up an Andy Samberg preset and just dimed a few sliders for Ears and Nose.
|
# ? Oct 8, 2022 01:21 |
|
Hadlock posted:What is under the center console of the new Corvette, if it's a mid engine rwd car Coolant pipes, aircon lines, pas pipes if it's still got an engine driven pump, theres actually quite a lot to pack up in there
|
# ? Oct 8, 2022 09:39 |
|
BuckyDoneGun posted:First look at Adam Driver as Enzo in Michael Mann's Ferrari flick. Michael Mann is making a Ferrari movie!?
|
# ? Oct 8, 2022 11:52 |
|
mobby_6kl posted:Michael Mann is making a Ferrari movie!? Based on the Brock Yates book. https://www.youtube.com/watch?v=-aMCzRj3Syg
|
# ? Oct 8, 2022 13:06 |
|
This year's Autozam harvest has been bountiful https://twitter.com/iteclab2013/status/1578910485931782145?t=uhDNTzpBFfMtJ1MFoJaRlQ&s=19 https://twitter.com/pg6sa101173/status/1579047141359910912?t=ZWHvdiLqYW0QFnnXXPVnJA&s=19 Olympic Mathlete fucked around with this message at 13:53 on Oct 9, 2022 |
# ? Oct 9, 2022 13:36 |
|
Today I learned that the LT6 in the upcoming Corvette Z06 is not an LS-based engine, and not only has DOHC, but a flat-plane crank. Somehow I had not previously learned that. https://www.holley.com/blog/post/everything_you_ever_wanted_to_know_about_gm_s_new_670_horsepower_lt6_flat-plane_crank_v8/ I guess GM feels it's finally wrung everything it can out of an overhead valve engine? edit: 670 HP @ 8400 RPM/450 lb. ft. @ 6300. Naturally aspirated. edit again: out of 5.5L! Darchangel fucked around with this message at 19:29 on Oct 12, 2022 |
# ? Oct 12, 2022 19:26 |
|
I think it's less "GM has done everything they can do with pushrods" and more "moving the Corvette upmarket while also leaving room for an even more powerful ZR1 model" requires a high-powered naturally aspirated build.
|
# ? Oct 12, 2022 20:30 |
|
OHC isn't a total departure for them, either. The OG LT5 was OHC as well. Don't think they had help from Lotus and Mercury Marine on this new lump, though.
|
# ? Oct 12, 2022 20:49 |
|
IOwnCalculus posted:I think it's less "GM has done everything they can do with pushrods" and more "moving the Corvette upmarket while also leaving room for an even more powerful ZR1 model" requires a high-powered naturally aspirated build. The Zora and ZR1 are expected to have a twin-turbo version called the LT7.
|
# ? Oct 12, 2022 22:16 |
|
Darchangel posted:Today I learned that the LT6 in the upcoming Corvette Z06 is not an LS-based engine, and not only has DOHC, but a flat-plane crank. Somehow I had not previously learned that. Sick
|
# ? Oct 13, 2022 09:11 |
|
Can we get a 330hp I4 version of that?
|
# ? Oct 13, 2022 09:55 |
|
Other direction, 1000hp V12 please and thank you.
|
# ? Oct 13, 2022 15:59 |
|
83hp single lets go
|
# ? Oct 13, 2022 17:08 |
|
Rigged Death Trap posted:83hp single lets go KTM is getting close to that with the 690 singles, I think?
|
# ? Oct 13, 2022 17:11 |
|
You can get 100hp out of a CR500 with a little work.
|
# ? Oct 13, 2022 17:16 |
|
|
# ? Apr 28, 2024 09:52 |
|
Mazda unofficially also lets you get adequate amounts of power out of a single rotor (654cc). https://www.youtube.com/watch?v=fWmro8_pplo Edit: Over 100hp. https://www.youtube.com/watch?v=kNophRdXYNQ McTinkerson fucked around with this message at 17:30 on Oct 13, 2022 |
# ? Oct 13, 2022 17:23 |