|
Get a voodoo crate motor imo. GabbiLB fucked around with this message at 23:28 on Oct 8, 2016 |
# ? Oct 8, 2016 23:26 |
|
|
# ? Apr 26, 2024 10:44 |
|
Rolo posted:No? Close enough.
|
# ? Oct 8, 2016 23:27 |
|
ilkhan posted:X-plan isn't the best deal around (you can usually negotiate a slightly better deal), but it was great for getting rid of the haggling BS when I bought my 'Stang. Walked in, built the car on B&P in their computer, hit print, handed over the x-plan PIN, handed over a deposit, got a receipt, and walked out. I was still in the financing office for an hour, but that was just signing poo poo and telling the dude "no" a lot. Hence my skepticism to his claims. I don't care how good your x-plan dealer is, trying to get something in this limited of production is fraught with bullshit and slimy dealers.
|
# ? Oct 9, 2016 00:42 |
|
There's a dealer by me that marks up STs, but has sold two GT350s and an RS for MSRP. I don't get it.
|
# ? Oct 9, 2016 01:20 |
|
Doing the final cleanings on the wheels and testing the new trickle charger before putting her away for the season. and just for you guys....
|
# ? Oct 9, 2016 02:45 |
|
kalvick posted:Doing the final cleanings on the wheels and testing the new trickle charger before putting her away for the season.
|
# ? Oct 9, 2016 03:00 |
|
When I put it away last year on 10-10-2015 I had 23,934.4. Since then I have put 320.4 miles on it. If you average it out over 16 years, I put 1515.92 miles on it each year. so its not like I don't drive it
|
# ? Oct 9, 2016 04:13 |
|
kalvick posted:Throttle spacers I wasn't disagreeing dude I've never bought, nor felt the urge, to install a throttle spacer. I'd just never considered that it would alter the tension on the throttle cable, and that is a more feasible explanation for any butt-dyno results than the airflow BS. You should see the logic hoops people jump through to explain how "better grounding" improves the DBW throttle body on the Mazdaspeed3.
|
# ? Oct 9, 2016 05:58 |
|
IOwnCalculus posted:I wasn't disagreeing dude I've never bought, nor felt the urge, to install a throttle spacer. I'd just never considered that it would alter the tension on the throttle cable, and that is a more feasible explanation for any butt-dyno results than the airflow BS. But haven't folks put better grounding kits on import cars, dynoed them, and then seen a difference?
|
# ? Oct 9, 2016 21:29 |
|
Mr-Spain posted:That's Allen Parkway, which is crazy crowned and and very curved. Yeah, I'd never really thought about road crowning, that could make a massive difference.
|
# ? Oct 9, 2016 21:41 |
|
Raluek posted:Wait, hang on, what do you drive? I don't recognize you, although I don't recognize a lot of people since that namechange thread. But a Mustang making more power than a GT350 definitely needs to be posted about! 2012. Mostly stock (little stuff but nothing really performance related since filters and resonator deletes don't really do anything for these AFAIK). Only factory options are the SVT Performance Package and stripe delete. Sooner or later I'll put a 2.9L Whipple on it or something. The fact that the factory powertrain warranty expired 5 months ago ups the likelihood of this happening soon by a large amount.
|
# ? Oct 9, 2016 21:48 |
|
scrubs season six posted:2012. Mostly stock (little stuff but nothing really performance related since filters and resonator deletes don't really do anything for these AFAIK). Only factory options are the SVT Performance Package and stripe delete.
|
# ? Oct 10, 2016 07:49 |
|
Krakkles posted:So, not more power than the GT350. The '12 GT500 makes 550/510, doesn't it? Which is more than the GT350's 526/429. Not like they're really comparable, since one's a heavy-ish torque monster for the street whereas the other is a light high-revving track car.
|
# ? Oct 10, 2016 09:08 |
|
Raluek posted:The '12 GT500 makes 550/510, doesn't it? Which is more than the GT350's 526/429. Not like they're really comparable, since one's a heavy-ish torque monster for the street whereas the other is a light high-revving track car. Are you sure the GT350 is light?
|
# ? Oct 10, 2016 18:26 |
|
Raluek posted:The '12 GT500 makes 550/510, doesn't it? Which is more than the GT350's 526/429. Not like they're really comparable, since one's a heavy-ish torque monster for the street whereas the other is a light high-revving track car.
|
# ? Oct 10, 2016 19:17 |
|
Coredump posted:Are you sure the GT350 is light? That's... quite surprising. Both sourced from C&D: 2011 GT500: 3751 pounds 2016 GT350R: 3710 pounds 2016 GT350 with track pack: 3790 pounds The GT350 might have a bit less weight on the nose, though... C&D claims 55.7% on the GT500, Motor Trend says 54% on the GT350. Probably speaks a lot to how much stiffening the car up overall adds weight.
|
# ? Oct 10, 2016 19:35 |
|
IOwnCalculus posted:That's... quite surprising. Both sourced from C&D: A track car should not weigh more than a street brawler. color me surprised!
|
# ? Oct 10, 2016 19:58 |
|
kalvick posted:A track car should not weigh more than a street brawler. color me surprised!
|
# ? Oct 10, 2016 20:06 |
|
ilkhan posted:The S550 platform is just plain heavy. Not as heavy as the Challenger or Camaro (last gen) are, but still pretty heavy. Like most, I have no idea where the weight is going. The car is quiet and stiff, but it must be extraordinarily dense as well. Ford stuff is pretty heavy at the moment. The Fusion Sport is also north of 4k lbs.
|
# ? Oct 10, 2016 20:26 |
|
Imagine, just imagine... same power, suspension, body, etc of the GT350.... but carbon fiber. Can you imagine how insanely awesome the vehicle would feel and drive with 500 - 700 lbs taken off?
|
# ? Oct 10, 2016 20:49 |
|
Coredump posted:Imagine, just imagine... same power, suspension, body, etc of the GT350.... but carbon fiber. Can you imagine how insanely awesome the vehicle would feel and drive with 500 - 700 lbs taken off? I mean, at that point you're basically slapping a horse badge (and a pedestrian bloodlust) on this:
|
# ? Oct 10, 2016 20:53 |
|
Coredump posted:Imagine, just imagine... same power, suspension, body, etc of the GT350.... but carbon fiber. Can you imagine how insanely awesome the vehicle would feel and drive with 500 - 700 lbs taken off? More likely is a switch to aluminum, since they're already making the #1 vehicle in the US out of the stuff.
|
# ? Oct 10, 2016 21:00 |
|
I always have dreams converting everything inside my car from plastic to carbon fiber. Carbondriven.com makes a lot of the stuff, but i want next level stuff. I mean, big pieces like the entire dash, doors, and center console. also I dont know how good thier stuff is.
|
# ? Oct 10, 2016 21:12 |
|
Cocoa Crispies posted:More likely is a switch to aluminum, since they're already making the #1 vehicle in the US out of the stuff.
|
# ? Oct 10, 2016 21:42 |
|
kalvick posted:I always have dreams converting everything inside my car from plastic to carbon fiber. Carbondriven.com makes a lot of the stuff, but i want next level stuff. I mean, big pieces like the entire dash, doors, and center console. I just want to switch the chrome inserts around vents, gauges, shifter, etc. to something that's not reflective. And maybe a little visor over the vent where I usually clip my phone.
|
# ? Oct 10, 2016 22:45 |
|
Coredump posted:Are you sure the GT350 is light? Yeah I'm actually pretty surprised to learn that this isn't the case. Huh.
|
# ? Oct 11, 2016 00:01 |
|
ilkhan posted:Indeed, it wouldn't surprise me at all if the 2018 refresh moves the Mustang to aluminum body. I wonder how much more it would cost them. They buy so much of the stuff already I'm sure they're getting a decent bulk rate. Half the body is already aluminum. I think it's more the subframe bits that could stand to shed some weight. The rear cradle is ridiculously heavy.
|
# ? Oct 11, 2016 01:15 |
|
Is the subframe heavy to accommodate convertibles?
|
# ? Oct 11, 2016 16:48 |
|
Elephanthead posted:Is the subframe heavy to accommodate convertibles? The subframe on convertibles is there to stop the car flexing. its a hollow tube for lightness sake. yea you could remove them for weight savings but you will lose significant performance. so that is a weight that should be left alone unless you use exotic materials for keeping the car stiff.
|
# ? Oct 11, 2016 17:03 |
|
I saw a yellow new edge mustang GT driving in to work today. It had the rear bumper "MUSTANG" filled in with orange lettering. I couldn't look at it and see anything other than "MUSTARD." That is all.
|
# ? Oct 11, 2016 19:18 |
|
Sounds bad, Todd.
|
# ? Oct 11, 2016 19:20 |
|
http://jalopnik.com/why-ford-mustang-sales-should-stay-down-in-the-united-s-1787669490?rev=1476211491299 Mustang sales are going down, fortunately the nightmare may soon be over and the thirst for pedestrian blood can finally be quenched!
|
# ? Oct 11, 2016 20:23 |
|
The blood god that has been terrorizing Flat Rock may have finally been appeased.
|
# ? Oct 11, 2016 20:33 |
|
Blood God has been appeased! Or car sales in general are falling after a record breaking year and GM is selling Camaro with a wheelbarrow full of cash on the hood.
|
# ? Oct 11, 2016 21:18 |
|
Someone help me find a 69-70 Sportsroof Mustang in blue in good shape so I can get it for my pops. Edit: under 25 grand. Coredump fucked around with this message at 21:39 on Oct 11, 2016 |
# ? Oct 11, 2016 21:36 |
|
http://www.autoblog.com/2016/10/11/ford-mustang-performance-power-upgrade-15235/ Interesting, for $29k you can get a 4 cyl mustang ecoboost non-premium performance pack that has 390lb ft of torque.. and is 150lbs lighter over the front axle than a V8 GT with almost the same torque. However the last gen GT is the same weight as current gen 4 cyl turbo what a weird world we live in.
|
# ? Oct 12, 2016 01:38 |
|
But you can get a V8 for more money
|
# ? Oct 12, 2016 01:43 |
|
Watched a 95 Cobra with a cat back put down 231rwhp earlier. drat I forgot how good those cars sound. It was in for that before a cam and intake swap
|
# ? Oct 12, 2016 01:48 |
|
|
# ? Oct 12, 2016 02:27 |
|
|
# ? Apr 26, 2024 10:44 |
|
https://www.motormag.com.au/news/1609/ford-mustang-allan-moffat-edition-revealed
|
# ? Oct 12, 2016 02:42 |