|
I love my harbor freight rivnut tool. I’m sure the Astro is better, I might get if I ever break mine. It seems like mandrels are the expensive part.
|
# ? Jan 15, 2022 05:50 |
|
|
# ? May 28, 2024 15:02 |
|
I don't know about those two but I can tell you the WETOLS one on Amazon was good years ago when a friend bought one and was utter poo poo by the time I bought mine last year. Like, it didn't last 5 rivets before going to poo poo.
|
# ? Jan 15, 2022 05:57 |
|
I bought this one in the beginning of November and it's surprisingly not complete poo poo: https://www.amazon.com/gp/product/B07T8YZY23/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Came with a ton of mandrels (in well-marked plastic cases!) and bunch of pretty making GBS threads looking rivnuts. The instructions are hilarious.
|
# ? Jan 15, 2022 14:44 |
|
Motronic posted:Sexangular wesleywillis fucked around with this message at 15:26 on Jan 15, 2022 |
# ? Jan 15, 2022 15:22 |
|
I have a big Sherex rivnut tool for setting 1/2" rivnuts. It came with mandrels for smaller rivnuts, too. But if you apply full force on a #10-32 rivnut, it will effortlessly snap the mandrel or strip the rivnut. It's obvious in retrospect, but there is no mechanical stop, and you can't just set the smaller ones with a solid, hard squeeze, or you will break stuff. It's also easy to break mandrels if you apply sideways bending force to the mandrel when operating the levers. If you are using a large rivnut tool to set smaller rivnuts, you need to use a gentle touch.
|
# ? Jan 15, 2022 18:32 |
|
Nah man you gotta go vintage. I have no idea what I’ll use it for but I figured it was a useful tool to have so I threw it on the pile of stuff to bring up from my dad’s workshop.
|
# ? Jan 15, 2022 18:44 |
|
So the Ryobi Lynx system looks to not be very versatile or economical. I was originally quite interested but it's just so drat expensive for small components. Even the rolling toolbox is just too pricey, may as well go Milwaukee for the money.
|
# ? Jan 15, 2022 20:47 |
|
*Does a search for Ryobi Link* So, it's Lego?
|
# ? Jan 15, 2022 21:13 |
|
The tool box is. The wall system is a bit weirder. I'm just sticking with pegboard and the Husky boxes.
|
# ? Jan 15, 2022 21:19 |
|
devmd01 posted:Nah man you gotta go vintage. I have no idea what I’ll use it for but I figured it was a useful tool to have so I threw it on the pile of stuff to bring up from my dad’s workshop. These are also useful, but only do pop rivets, not rivnuts.
|
# ? Jan 15, 2022 22:29 |
|
Rhyno posted:The tool box is. The wall system is a bit weirder. I'm just sticking with pegboard and the Husky boxes. I'm always wary of manufacturers doing their own proprietary systems like that. Like, peg board has basically standard spacing at this point.
|
# ? Jan 15, 2022 22:56 |
|
The only thing I would switch to is slatwall with metal inserts. I had a sheet of that in the wall years ago and it was the best poo poo ever. But I have so much pegboard stuff there's no reason to change.
|
# ? Jan 15, 2022 23:08 |
|
I mean, I've never owned a house nor lived somewhere long enough for making permanent changes like hanging peg board to make sense, so I am unqualified to really have an opinion on those systems. I just like drawers vs hanging on the wall, but maybe that's just a product of my circumstances.
|
# ? Jan 16, 2022 00:05 |
|
Uthor posted:I mean, I've never owned a house nor lived somewhere long enough for making permanent changes like hanging peg board to make sense, so I am unqualified to really have an opinion on those systems. I just like drawers vs hanging on the wall, but maybe that's just a product of my circumstances. I like both. The small stuff goes in the tool box and the big stuff (and yard stuff) goes in the peg board.
|
# ? Jan 16, 2022 01:31 |
|
kastein posted:These are also useful, but only do pop rivets, not rivnuts. Well now I have some reading to do because I assumed they were the same thing with a different name!
|
# ? Jan 16, 2022 13:53 |
|
devmd01 posted:Well now I have some reading to do because I assumed they were the same thing with a different name! Cliffsnotes: they both attach the same way but a rivet is basically just a nail with a head on both sides, a rivnut has a threaded hollow part down the middle so you can bolt things to it.
|
# ? Jan 16, 2022 20:04 |
|
And you can get big rivnuts. My van's skid plates are held on with 1/2" rivnuts.
|
# ? Jan 16, 2022 21:47 |
|
devmd01 posted:Well now I have some reading to do because I assumed they were the same thing with a different name! They're really pretty cool tools. In rust prone areas they can be loving infuriating as rust will build up on the threads and the rivnut will spin in the hole until you die of old age instead of coming unscrewed, but otherwise they're very nice. I try to remember to put a little tack weld on one side (if possible) or a notch in one side of the hole they're pressed into so that they won't spin as easily.
|
# ? Jan 16, 2022 22:01 |
|
Also, the cheap rivnuts are way more prone to this. Better ones have ribs on the outside. But for those to work you need to be careful not to over drill the holes they are going into.
|
# ? Jan 16, 2022 22:04 |
|
The gearwrench 120xp flex ratchet set I ordered from tool discounter forever ago showed up yesterday. The double stacked 60 tooth pawls feel very weirdly smooth, and the stiffness of the non locking flex head detents is right on. Not too much to the point that it sucks to mash the head of the ratchet into a dirty hole and adjust it mid swing and not so little that it just flops around. The 3/8 ratchet is the perfect length, the stubby is a nice bonus, the 1/4 was wonderful for doing glow plugs, and I can't wait to break some poo poo with the 1/2 flex head that's basically a fancy breaker bar.
|
# ? Jan 17, 2022 02:38 |
|
I bought a few Tekton 90T ratchets a few months ago and noticed last week that one was dead: The thing in the middle should be one solid piece rather than two. I filled out the warranty form on their website, attached that picture, and with no further questioning was sent a full rebuild kit that arrived this week: I’m a little disappointed it broke but there’s good odds I may have used it on the other end of something with the impact wrench, so I’m still pleased with the ratchets.
|
# ? Jan 17, 2022 07:13 |
|
I love digging through the tool bins at my local thrift store. Most of the time it is all garbage but sometimes there are good finds! Proto ratchet and nutrounder, Craftsman wrench and a german made ball-peen hammer. All for $15! Perfect for my limited budget.
|
# ? Jan 22, 2022 18:17 |
|
PBCrunch posted:Does anyone have any experience with rivet nut tools? They look awesome and very handy. Is there a big difference between a $50 Harbor Freight unit and a $75 Astro Pneumatic? kinda late but i would suggest getting one that is compatible with plus nuts (pre bulbed rivet nuts) as well. i prefer these to regular rivet nuts in many cases. you need a longer mandrel to set plus nuts, so the harbor freight tool and most astros will not work. i have the astro 1450, which does everything, and it works really well
|
# ? Jan 22, 2022 19:01 |
|
runaway pancake posted:kinda late but i would suggest getting one that is compatible with plus nuts (pre bulbed rivet nuts) as well. i prefer these to regular rivet nuts in many cases. I just bought that! Only used it once but it seems excellent and I love that the blown plastic case includes a little extra cubby for stuff like your rivnuts.
|
# ? Jan 23, 2022 04:08 |
|
Sherex DLHT is a solid tool for big rivnuts (esp 3/8" and over). It's a quality tool that performs well, which is good because the fucker costs $250.
|
# ? Jan 23, 2022 06:06 |
|
Bought a Mini-Ductor II off a friend of mine. Can't wait to see what i can do with it. I've got a small oxy torch setup that i use a lot but the thought that this is safer/easier/quicker is appealing.
|
# ? Jan 24, 2022 19:55 |
|
Tell me what you think of it. Kind of wondering how practical it is with "maneuverability" in some quarters, but I'm sure it's way safer than the hot wrench.
|
# ? Jan 24, 2022 22:58 |
|
slidebite posted:Tell me what you think of it. Kind of wondering how practical it is with "maneuverability" in some quarters, but I'm sure it's way safer than the hot wrench. You can bend the wires however you like so long as they don’t touch/short, so you can make it work in some pretty close quarters. It’s just too bad even the AliExpress knockoffs are outside of impulse buy territory.
|
# ? Jan 25, 2022 01:34 |
|
Frank Dillinger posted:You can bend the wires however you like so long as they don’t touch/short, so you can make it work in some pretty close quarters. It’s just too bad even the AliExpress knockoffs are outside of impulse buy territory. If i didn't get this as a good used deal i would have never ponied up the $ as my torch set only cost me $350 and has more utility. Got this for $200 used, retails for about $600.
|
# ? Jan 25, 2022 15:33 |
|
I was working with a professional install team today doing graphics for the super bowl, it blew my mind... they were all using M12 red teams and they loving loved them. I commented something like "i cant believe you guys are using 12v for this" one of the guys tossed me his compact impact - holy.. I was blown away, then he tossed me the drill - smooth as silk. I'm.... really considering the compact 12v drill and impact - I feel dirty like I cheated on my girl Makita... but man... Torquey, compact, smooth as silk, really really easy to manipulate.. I realllllly feel like these little guys would benefit my shop.
|
# ? Feb 4, 2022 08:57 |
|
LobsterboyX posted:I was working with a professional install team today doing graphics for the super bowl, it blew my mind... they were all using M12 red teams and they loving loved them. I commented something like "i cant believe you guys are using 12v for this" one of the guys tossed me his compact impact - holy.. I was blown away, then he tossed me the drill - smooth as silk. I'm.... really considering the compact 12v drill and impact - I feel dirty like I cheated on my girl Makita... but man... Torquey, compact, smooth as silk, really really easy to manipulate.. I realllllly feel like these little guys would benefit my shop. I continue to love my M12 Fuel Surge Impact Driver. https://www.homedepot.com/p/Milwauk...cB&gclsrc=aw.ds Never wanted for power, it's been my go-to tool for 2 years and has done everything from stupid repetitive assembly to drywall installation to electrical. Small, powerful easy to control, it's great.
|
# ? Feb 4, 2022 12:35 |
|
I can believe it. My 18v red drill and impact driver are both totally overkill for my regular needs. The impact in particular is absurdly overpowered to the point of being tricky to use sometimes.
|
# ? Feb 4, 2022 12:46 |
|
Have you used the Makita subcompacts? https://www.homedepot.com/p/Makita-18-Volt-LXT-Lithium-Ion-Sub-Compact-Brushless-Cordless-Impact-Driver-Tool-Only-XDT18ZB/316360448 I haven't really needed more around the house.
|
# ? Feb 4, 2022 12:57 |
|
Yeah if you’re already in the makita ecosystem, the brushless LXT mini impact is a big improvement over the older ones. If I had to do it over again I’d probably go team red though…
|
# ? Feb 4, 2022 13:20 |
|
12v really does have oodles of power for 99.9 of anything. I have a Bosch and I love its physical size and torque. But this for me too: Crunchy Black posted:If I had to do it over again I’d probably go team red though…
|
# ? Feb 4, 2022 15:33 |
|
My noco genius 1 has apparently stopped charging my bike (The tracker has a voltage graph, the daily spike is gone and the voltage has been falling for a few days). I went and checked on it, the status led is slowly pulsing red, which supposedly means charging & below 75%. I reset it, maybe it will charge again, but seeing as I still have warranty on it from Amazon I figured I'd complain to them and they are sending me a replacement. Considering the car charger I bought a long time ago was DOA noco really isn't doing too well in my book. Back then I was mighty confused because their UX wasn't too intuitive and I thought I was just not triggering it right.
|
# ? Feb 4, 2022 16:12 |
|
meatpimp posted:I continue to love my M12 Fuel Surge Impact Driver. https://www.homedepot.com/p/Milwauk...cB&gclsrc=aw.ds plus the surge tool is significantly quieter than a traditional impact when it's hammering
|
# ? Feb 4, 2022 16:18 |
|
meatpimp posted:I continue to love my M12 Fuel Surge Impact Driver. https://www.homedepot.com/p/Milwauk...cB&gclsrc=aw.ds Thats the one they were using, mean little fucker. Uthor posted:Have you used the Makita subcompacts? My go-to impact for screwing is the old white/black makita compact - I think what I really liked about the Milwaukee is the form factor of the pistol grip. Last year I bought the M12 ratchet set - I love the drat thing, I think I've charged it once or twice. so now I KINDA am in that eco system.
|
# ? Feb 4, 2022 20:16 |
|
All my carpenting stuff is 90% M18. I have loved the full size 1/2" M18 brushless impact for a long time. I tried to like the older M18 3/8" impact but it just didn't quite do it for me. I recently got the M12 stubby 3/8" impact and the right angle die grinder and holy poo poo do those things rule. The only thing I don't like about the M12 platform is that the battery form factor doesn't handle drops quite as well.
|
# ? Feb 5, 2022 04:39 |
|
|
# ? May 28, 2024 15:02 |
|
Yerok posted:I recently got the M12 stubby 3/8" impact and the right angle die grinder and holy poo poo do those things rule. My buddy has either the 3/8 or 1/2 stubby impact, I forget which, and I can confirm that thing does rule. I've got a DeWalt 12v compact impact that I got with three batteries for $100 on a sale at Lowes and the M12 is without a doubt better, just not better enough for me to buy into another ecosystem, I'd rather save up to get higher power options. I already got the Kobalt right angle impact which, while huge in length, is amazing for tight quarters and will bust off mechanic-installed (read: overtorqued) mag-chloride gummed up lug nuts without a hitch. I still might buy into the M18 ecosystem eventually, though. They're not always the best but I've almost never seen them be bad when Project Farm or whoever tests them.
|
# ? Feb 5, 2022 21:16 |