|
You can just weigh down the rear seat or use a jack under the headers with it on the centerstand and get the front wheel off the ground. Jamming some 2x4s under the headers can help too. Bike will look awesome when it's done, the black and gold wheels looks good already.
|
# ? Mar 30, 2013 19:58 |
|
|
# ? May 23, 2024 16:50 |
Sock Weasel posted:Switched out the gas tank and fairing for black ones, also cleaned the shocks because they were nasty. All I need to do now is sand and spray the crash bars and the mudguard... but that involves removing the front wheel and I don't own a stand. Your garage appears to be an 18th century cremation furnace. Also, spending 20 bucks on a rattlecan of paint for the exhaust would improve the look of the bike immensely, seeing as everything else is already shiny.
|
|
# ? Mar 30, 2013 21:37 |
|
Rustoleum's aluminum 2200*F paint is pretty durable in my experience, and it looks really good.
|
# ? Mar 30, 2013 22:21 |
|
Rev. Dr. Moses P. Lester posted:Painted the frame! Sorry, no more welds Dat bulge! What the crap is this?
|
# ? Mar 31, 2013 02:34 |
|
Actually got some wear all the way to the edge of my tire for the first time ever on any of my bikes, even if there's still chicken strip. Today was really the first time I've ever had the combination of really curvy roads and warm weather. After a few hours on twisty roads today I'm significantly more confident in the turns than I've ever been before. It's a good feeling. Also probably the most fun I've ever had on a bike today. Definitely had some butt clenchers in turns that became extremely tight very quickly. Lightly scraped a footpeg for the first time too in such a turn. hayden. fucked around with this message at 04:07 on Mar 31, 2013 |
# ? Mar 31, 2013 04:00 |
|
Scrape pegs, take names.
|
# ? Mar 31, 2013 04:54 |
|
Geirskogul posted:Rustoleum's aluminum 2200*F paint is pretty durable in my experience, and it looks really good. I'm assuming we're talking about the "chrome colored" paint? I'm curious how that looks.
|
# ? Apr 1, 2013 15:57 |
|
ADINSX posted:I'm assuming we're talking about the "chrome colored" paint? I'm curious how that looks. I'm talking about this stuff. here are pics of it on the head and exhaust of my fiancee's CB650. nsaP posted:Scrape pegs, take names. Check the pegs, dawg. Queen_Combat fucked around with this message at 16:06 on Apr 1, 2013 |
# ? Apr 1, 2013 16:01 |
|
Yesterday technically. Installed an OEM sissy bar. To be honest... I didn't even mean to buy it. I have ebay searches saved for certain things and vmax sissy bar/rack is one of them. It e-mailed me in the morning, and at 6am with my morning cup of coffee I thought it was a swell idea and bought it. No bullshit, I don't recall doing it. Mod monkey snuck into my morning fog and forced me to buy it. My fully conscious self has been considering just putting it right back up on e-bay, but it will work for a sissy bar pack and my time/money is now all about getting me to North Carolina and back in May so... on it went. Anyway, post install my wife decorated our bikes with Easter stuff and we spent the day on our machines. His: Hers:
|
# ? Apr 1, 2013 16:18 |
|
^ Beautiful.Slavvy posted:Your garage appears to be an 18th century cremation furnace. Also, spending 20 bucks on a rattlecan of paint for the exhaust would improve the look of the bike immensely, seeing as everything else is already shiny. Thanks for the tip, Z3n! Will give it a shot this weekend.
|
# ? Apr 1, 2013 16:19 |
|
I put new NGK 9EIX spark plugs in the Ulysses, the PO had plugs that were a heat range too hot in it. The off-the-book timing check procedure I tried didn't work out. It was going to be a bigger project than just jacking the bike, so I removed the pipe and jacked the bike. Timing was close, no real worries there. Took it for a ride, still get the ping when I load it up at part-throttle around 3000 rpm. If I snap to WOT at that RPM or ride it about 500 higher, the ping stops. Not certain whether I should add more fuel there or if I should smooth the ignition advance map. Going to start by marking my throttle so I know where to make adjustments in the map. e: oh yeah I also eliminated my exhaust leak in the Jardine elbow pipe connection by jamming it full of aluminum foil before I tightened the pipe clamp. Didn't fix the decel popping, which means I might need to add some fuel to the zero-throttle overrun region. clutchpuck fucked around with this message at 18:59 on Apr 1, 2013 |
# ? Apr 1, 2013 18:45 |
|
clutchpuck posted:I put new NGK 9EIX spark plugs in the Ulysses, the PO had plugs that were a heat range too hot in it. Could be your intake rubbers are leaking which is leaning it out, they often leak on these bikes; though I don't know if it could manifest itself as such a lean condition that you get pinging and decel popping.
|
# ? Apr 1, 2013 19:38 |
|
I had my friend ride mine while I rode his for a bit - he said he got the same pinging when he had the race maps installed but it went away when he installed his EBR ECM, so I am thinking the maps are the issue. Especially with how it goes away when I snap it wide open. I actually just did some playing with ECMSpy, and learned that the closed loop learn region is modifiable, which is good because this is what I think is happening: the closed loop region's upper TPS boundary is a little too high. So when I open it part-way, it's not quite out of the closed loop region, and it's targeting 14.7 as I load it up. Once I snap to WOT or the RPM rises a few hundred, the ECM switches to open loop/map mode and starts giving it a richer "running through the gears" AFR. I think I can move the closed loop region's max TPS values down a bit and fatten up the transition zone between cruise and running through gears.
|
# ? Apr 1, 2013 19:54 |
|
Started reassembling after powdercoating and painting. Mark looks jaded and unimpressed like a 19th century Russian peasant here, but really he spent the 15 minutes before and after that pic going over all the ways the sidecar came out totally loving badass. No new welds
|
# ? Apr 1, 2013 23:54 |
|
I'm so confused, what's going on with the engine block on the
|
# ? Apr 1, 2013 23:57 |
|
Race regulated belly pan to catch crankcase leaks.
|
# ? Apr 2, 2013 01:01 |
|
Ah, makes sense
|
# ? Apr 2, 2013 01:17 |
|
That harbor freight trailer wheel is pretty sweet. Good weight savings on that bad boy.
|
# ? Apr 2, 2013 02:08 |
|
Neighbor chick is about 19 years old and bought a brand new baby Ninja last year (all of 500KMs on it now). Someone told her it was bad to leave gas in it over winter so she parked it with virtually nothing in it and no other prep Heard her trying to rev the bag off it in her driveway to get it to idle but to no avail so I went over to give her a bit of a hand. Bought some fuel cleaner put it in and took her on a ride for a while which luckily cleared it up after about 20 minutes of riding.
|
# ? Apr 2, 2013 02:21 |
slidebite posted:Neighbor chick is about 19 years old... No comment.
|
|
# ? Apr 2, 2013 02:40 |
|
The correct speedsensor magnet thingy shipped for my SV650 today. This will be my first bike job without a garage . P.S.: I want a Duke 390 so bad I can taste it!
|
# ? Apr 2, 2013 03:21 |
XYLOPAGUS posted:The correct speedsensor magnet thingy shipped for my SV650 today. This will be my first bike job without a garage . Did yours break too? Noone mentioned anything when I posted pics of my one. Did it just sort of fall apart when you took the wheel off or what?
|
|
# ? Apr 2, 2013 03:27 |
|
My new, heavy-duty cam chain got here today. It is wrapped in a piece of paper that kindly informs me, in English and Japanese, that the cam chain should not be eaten.
|
# ? Apr 2, 2013 04:39 |
|
Slavvy posted:No comment. Hey! I'm sure I don't need to tell anyone here that there is no 19 year old Columbian hottie anywhere that could resist a smooth overweight 40 year old Canadian that is trying to be helpful. Pepper spray would probably do it.
|
# ? Apr 2, 2013 04:56 |
|
Saturday: a beautifully sunny 10°C, picked it from storage and did a short haul back to my parents' place. Started taking apart the fairing to replace the spare bolt I had, but realized a bit too late that I still didn't have the rubber bushing that it screws into. Damnit. Put it back together. Rode out that night to meet some friends. Monday: 2°C and expecting snow, put it in my parents' neighbours' garage to pick up later. Today it's -1, and the rest of the week isn't looking brilliant.
|
# ? Apr 2, 2013 12:14 |
|
I stripped down my frame of every fastener and bracket to ready it for powder coating. Does anyone have any recommendation on Oregon powder coating operations? I'm looking for someone that will take off the old paint and do all the masking / prep for me.
|
# ? Apr 3, 2013 06:59 |
|
I "de-winterized" it by taking it for a real ride instead of just commuting and staying around town in the cold weather. 280 miles round trip and a nice day hike.
|
# ? Apr 3, 2013 08:06 |
|
Sagebrush posted:My new, heavy-duty cam chain got here today. It is wrapped in a piece of paper that kindly informs me, in English and Japanese, that the cam chain should not be eaten. this made my day. who makes the cam chain? Honda OEM replacement?
|
# ? Apr 3, 2013 15:35 |
|
I busted or dropped a cam chain in the VFR this morning. It's been rattling, I took it to my mechanic and he said not to worry about it. This morning I'm riding in and about an 1/8th of a mile from work when the bike makes a chunk noise and lurches. I clutched in and it died. I was in traffic and about to start climbing a hill with a semi behind me. I made a decision and popped the clutch to get it started, I was turning an indicated 6k rpms on what sounded like 2 cylinders and praying I wasn't destroying the engine. The mechanic just picked it up and is pretty much astonished that this happened. The bike only has 22~k miles on it. I can't seem to catch a fuckin break.
|
# ? Apr 3, 2013 17:37 |
|
The quest for better fueling with my butt-dyno continues. Yesterday, I backed up the race maps from my ECM and applied the maps from a guy in Indiana who runs a XB12R with a K&N and Jardine - like my Ulysses. With two exceptions, these maps are better than the race map. I get good cruise and good engine braking. I didn't manage to get it to ping on me, even after I let it bake without moving for a few minutes. The exceptions: - It wants to die at idle. I think it's too lean and when it cycles off closed-loop, it just dies. - There's a big hole in power around 4500RPM at WOT. Trying to decide whether I should start with the race map and try and tune out the ping, or start with the Jardine map and try to work out the two problem spots. I'd just bring it to a tuner, but the bike isn't currently set up for proper wideband (or narrowband for that matter) tuning. You can only read the rear cyl near the port or a combination of both down-wind from the header collector, so there's simply a lot of guesswork to be done. I'd have to pull the header off and have a pair of wideband bungs put in to do it right. Maybe the preprogrammed Jardine-specific ECM from EBR isn't such a bad $300.
|
# ? Apr 3, 2013 17:41 |
|
Ponies ate my Bagel posted:I busted or dropped a cam chain in the VFR this morning. It's been rattling, I took it to my mechanic and he said not to worry about it. This morning I'm riding in and about an 1/8th of a mile from work when the bike makes a chunk noise and lurches. I clutched in and it died. I was in traffic and about to start climbing a hill with a semi behind me. I made a decision and popped the clutch to get it started, I was turning an indicated 6k rpms on what sounded like 2 cylinders and praying I wasn't destroying the engine. you bought the wrong vfr. how bad did it sound when riding? if you popped a cam chain then it's very possible that pistons were introduced to valves
|
# ? Apr 3, 2013 17:54 |
|
GnarlyCharlie4u posted:cam chain? There's been a slight rattle during decel for the last 1500 miles. It was only present around 3500-4500 rpm's. When I first heard it I just rode it over and my mechanic took a quick spin on it. He identified it as the cam chain and said it wasn't uncommon for them to make some noise. I went to VFRWorld and when I asked about it was told it wasn't abnormal. I started riding with earplugs again recently (needed to learn how the bike sounded after I first got it) and with plugs in it wasn't audible at all. I'm dreading looking for a new engine. Edit: after whatever happened, happened I didn't hear anything that sounded like valves and pistons going at it. I was wearing plugs though and mostly just wanted to survive the incident.
|
# ? Apr 3, 2013 18:06 |
|
Sagebrush posted:My new, heavy-duty cam chain got here today. It is wrapped in a piece of paper that kindly informs me, in English and Japanese, that the cam chain should not be eaten.
|
# ? Apr 3, 2013 18:10 |
|
GnarlyCharlie4u posted:this made my day. Tsubaki. The box says CAMELLIA on it. It's the same one that KA performance sells for their slipper tensioner, but I found one for 20 dollars less ($30) and I'm using it with a regular tensioner. It is definitely much heavier-duty than the stock chain...the plates are much larger and beefier and the chain is physically heavier. (The exterior dimensions are the same obviously). Not sure if the additional weight will alter how freely the engine revs, but given what just happened to PAMB's VFR I'm happy to have the additional strength...
|
# ? Apr 3, 2013 18:16 |
|
clutchpuck posted:The quest for better fueling with my butt-dyno continues. Can this be worked into the thread title somehow?
|
# ? Apr 3, 2013 18:20 |
|
clutchpuck posted:I'd just bring it to a tuner, but the bike isn't currently set up for proper wideband (or narrowband for that matter) tuning.
|
# ? Apr 3, 2013 18:20 |
|
clutchpuck posted:my butt-dyno BlackMK4 posted:exhaust gas analyzer tee hee
|
# ? Apr 3, 2013 18:38 |
|
Sagebrush posted:Tsubaki. The box says CAMELLIA on it. It's the same one that KA performance sells for their slipper tensioner, but I found one for 20 dollars less ($30) and I'm using it with a regular tensioner. It is definitely much heavier-duty than the stock chain...the plates are much larger and beefier and the chain is physically heavier. (The exterior dimensions are the same obviously). Not sure if the additional weight will alter how freely the engine revs, but given what just happened to PAMB's VFR I'm happy to have the additional strength... Tsubaki is a high end Japanese chain manufacturer, one of the few that still makes their bread and butter stuff in Japan and not going to China. I sell tons of their industrial chain and only have good things to say about it. They are also a big OE supplier too.
|
# ? Apr 3, 2013 18:44 |
|
BlackMK4 posted:A tuner will have an exhaust gas analyzer, you don't need an o2 sensor at all. It won't measure individual cylinders, thus the guesswork.
|
# ? Apr 3, 2013 18:57 |
|
|
# ? May 23, 2024 16:50 |
|
Did a valve clearance job yesterday after work. They were really tight, almost to the point of having no gap. Hopefully this will eliminate the cylinder gas poofing back through the air filter on decel that I get every so often. If it doesn't, I may just bite the bullet and pull the entire valve cover assembly off. I also learned that "Off," "On," and "Reserve" are relative terms to my fuel petcock, and that the spring might just need replacement for being too tired and squishy. I sincerely hope the Honda sport models are designed for better valve access than the cruiser models are. Intake valves? Fairly easy, minimum of finger contortion and funky access angles. Exhuast valves? Let's stick them both an inch away from the frame and run coolant pipes right where your fingers and tools need to go, that sounds like a great idea!
|
# ? Apr 3, 2013 19:13 |