|
I was about to ask the same question about the cable management for the TV, especially with regards to power. Building code in my area specs that I can't just run a standard power cable through the wall, but I need to terminate a proper power run behind the TV and then run a short cable to the TV itself.
|
# ? Jan 10, 2013 19:45 |
|
|
# ? May 4, 2024 15:24 |
|
Martytoof posted:I was about to ask the same question about the cable management for the TV, especially with regards to power. Building code in my area specs that I can't just run a standard power cable through the wall, but I need to terminate a proper power run behind the TV and then run a short cable to the TV itself. I'm familiar with that code and did not properly wire it... Though I very well could have if I wanted. edit: Since I own my home no one can really get on me about it. I find the risk of fire acceptable. The cable runs clean through the wall so there's not really a chance of a live wire being exposed. I'm sure Holmes on Homes would freak out though. benisntfunny fucked around with this message at 05:30 on Jan 11, 2013 |
# ? Jan 10, 2013 20:28 |
|
Martytoof posted:I was about to ask the same question about the cable management for the TV, especially with regards to power. Building code in my area specs that I can't just run a standard power cable through the wall, but I need to terminate a proper power run behind the TV and then run a short cable to the TV itself. You want something like this In wall power They are really easy to install, and the romex wire in the wall isn't hot till you plug the regular power cables into them.
|
# ? Jan 11, 2013 15:56 |
|
benisntfunny posted:I'm familiar with that code and did not properly wire it... Though I very well could have if I wanted. Oh yeah I didn't mean to be accusatory or anything, I was just wondering how you handled it. For what it's worth I would probably have DIY'd that the same way myself. Maybe I would have added some sort of conduit, I'm not sure. It depends on how much drywall work I wanted to do after the fact That in-wall power thing looks pretty badass, though sixty dollars is the point where I probably invest some time in just running a line properly if I can.
|
# ? Jan 11, 2013 17:47 |
|
Martytoof posted:Oh yeah I didn't mean to be accusatory or anything, I was just wondering how you handled it. Oh okay . I know some people get really up in arms about not doing things to code. I look at code as a general guideline. If I had done my whole house lovely like that there might be a problem but running a single cord through the wall that terminates outside the wall on both places isn't going to be a big deal. Does anyone have any ideas for how I can hide these dumb wires? Even if I tie them all up and such they're still going to be there. Cable management is definitely the biggest reason I don't like my desk. I've seen some cable management trays at IKEA but they look like they will only fit IKEA desks. I almost think I'd have to weld/hack something together for mine .
|
# ? Jan 11, 2013 17:52 |
|
benisntfunny posted:Oh okay . I know some people get really up in arms about not doing things to code. I look at code as a general guideline. If I had done my whole house lovely like that there might be a problem but running a single cord through the wall that terminates outside the wall on both places isn't going to be a big deal. It is a very big deal. If your house ever burns down for any reason, even completely unrelated, and they find that power cord, your insurance is going to instantly deny the claim and the courts will back them up. Monoprice has a solution, it is safer, it meets code and is less than $50 for the whole rig. http://www.monoprice.com/products/product.asp?c_id=105&cp_id=10425&cs_id=1042513&p_id=4652&seq=1&format=2 E: Niss beat me to it. But you get the idea.
|
# ? Jan 11, 2013 18:29 |
|
Jonny 290 posted:It is a very big deal. If your house ever burns down for any reason, even completely unrelated, and they find that power cord, your insurance is going to instantly deny the claim and the courts will back them up. That is not true. Source: I've worked for an insurance company for eight years and hear about stuff like this all the time. What they would try to do is link the fire to the cord but if it's clear what started the fire they would not "instantly deny the claim".
|
# ? Jan 11, 2013 18:59 |
|
Jonny 290 posted:It is a very big deal. If your house ever burns down for any reason, even completely unrelated, and they find that power cord, your insurance is going to instantly deny the claim and the courts will back them up. I always forget about Monoprice, funny cause that is the exact product from them I used when I did my Plasma install. It worked great and I highly recommend it.
|
# ? Jan 11, 2013 19:58 |
|
Jufari posted:I love setups like this, but I never understood the practical use for more than 3 or 4 monitors. Maybe I'm looking for an excuse to do something similar myself? Well if you write code, edit video's or photos more monitors are better, but it is something to scale into. At 3 i was like I could really use a 4th monitor and now with the 6 I am commonly finding myself filling 5 of them and the 6th just runs system monitors on it for no reason. Bottom line if you use your computer as a tool you will eventually optimize its utility as a tool based on the resources available. This is how i generally have been using those 6 monitors since setting them up. [System Monitor][Test VM 1 ][ Test VM 2 ] [Browser W/ API][VS/eclipse][TS3/Debugger] If you are looking to get some really nice monitor mounts to do something like this, here is the company that made my mount. http://www.atdec.com/
|
# ? Jan 11, 2013 20:04 |
|
Crossposting from the GBS thread This is how not to wire peripherals.
|
# ? Jan 17, 2013 00:22 |
|
Dominoes posted:Crossposting from the GBS thread
|
# ? Jan 17, 2013 03:39 |
|
Misogynist posted:Also where not to put a receiver Oh man, how much did those monitors set you back? Nice setup!
|
# ? Jan 17, 2013 04:46 |
|
Oh hey, I found a 6 monitor stand for $100 that's getting really good reviews on Amazon. Not sure if I want to try building a 6 monitor 27" setup for anything besides running daytrading software or other realtime market analysis systems or something from home because that's just way too drat goony for even myself.
|
# ? Jan 17, 2013 05:05 |
|
necrobobsledder posted:Oh hey, I found a 6 monitor stand for $100 that's getting really good reviews on Amazon. Not sure if I want to try building a 6 monitor 27" setup for anything besides running daytrading software or other realtime market analysis systems or something from home because that's just way too drat goony for even myself. You probably couldn't anyways. When looking at stands always look at specs. 27" monitors are large and much heavier than say a 21 inch, so not all mounts will be able to really accommodate them. Just at a glance a 27" would probably be way to wide and heavy for it.
|
# ? Jan 17, 2013 06:14 |
|
Juriko posted:You probably couldn't anyways. When looking at stands always look at specs. 27" monitors are large and much heavier than say a 21 inch, so not all mounts will be able to really accommodate them. Just at a glance a 27" would probably be way to wide and heavy for it. It says it holds monitors up to 13 lbs, and the dell 27" says it's 12.5 lbs without the stand. Dimensions are going to be a problem, because the page says it's designed for 19" monitors.
|
# ? Jan 17, 2013 06:24 |
|
Wicaeed posted:Oh man, how much did those monitors set you back?
|
# ? Jan 17, 2013 12:45 |
|
benisntfunny posted:Does anyone have any ideas for how I can hide these dumb wires? Even if I tie them all up and such they're still going to be there. Cable management is definitely the biggest reason I don't like my desk. I've seen some cable management trays at IKEA but they look like they will only fit IKEA desks. I almost think I'd have to weld/hack something together for mine . I don't know where you can buy them but they make baskets that are like 2" deep, 2" wide and run at different lengths. You could relocate your gaggle of wires up to that, mounted at the back of your desk, running the length of the desk. Having them up just below the surface of the desk hides them pretty well, makes them easily accessible (after you untangle them), and you don't really have to do any work to set it up besides laying them back and forth to extend them out across the basket. I'll see if I can find an example, but it really is the lazy man's cable management. Here is a good example: http://lifehacker.com/179911/hack-attack-the-cordless-workspace-sort-of?tag=softwareworkspaces Even with the opaque desk, it should be far enough back that it'll look cleaner then on the floor. Especially if you find a smaller basket then whats in the link. That guy zip ties everything, but it works well if you just lay them in there. iceslice fucked around with this message at 16:56 on Jan 17, 2013 |
# ? Jan 17, 2013 16:52 |
|
Misogynist posted:Also where not to put a receiver
|
# ? Jan 17, 2013 18:09 |
|
Dominoes posted:Why? Where do you suggest moving it? If it where me I might try that tower holder that Ikea made for Jerker desk and mount the receiver vertically on the side of the desk. Or get a better monitor hutch and put it below the monitors. Or attach it to the underside of the desk, just leave enough of a gap between the top of receiver and the bottom of the desk to let it vent.
|
# ? Jan 17, 2013 18:14 |
|
iceslice posted:I don't know where you can buy them but they make baskets that are like 2" deep, 2" wide and run at different lengths. You could relocate your gaggle of wires up to that, mounted at the back of your desk, running the length of the desk. Having them up just below the surface of the desk hides them pretty well, makes them easily accessible (after you untangle them), and you don't really have to do any work to set it up besides laying them back and forth to extend them out across the basket. I'll see if I can find an example, but it really is the lazy man's cable management. They make them at IKEA....
|
# ? Jan 18, 2013 15:30 |
|
iceslice posted:I don't know where you can buy them but they make baskets that are like 2" deep, 2" wide and run at different lengths. You could relocate your gaggle of wires up to that, mounted at the back of your desk, running the length of the desk. Having them up just below the surface of the desk hides them pretty well, makes them easily accessible (after you untangle them), and you don't really have to do any work to set it up besides laying them back and forth to extend them out across the basket. I'll see if I can find an example, but it really is the lazy man's cable management. Please don't use plastic zip ties. Get some velcro cable ties. I'm all for cable management but you have to have the self-discipline to not rip all that poo poo apart when you're replacing one cable or something out of the bundle. When you get lazy with it, it goes downhill quick.
|
# ? Jan 18, 2013 15:34 |
|
Bob Morales posted:Please don't use plastic zip ties. Get some velcro cable ties. Better/cheaper than Velcro ties if you need a lot: Velcro rolls at Walmart or wherever, right next to the ties. Usually get 3-6 feet, just cut to length.
|
# ? Jan 18, 2013 16:06 |
|
Dominoes posted:Why? Where do you suggest moving it? If that receiver is the same width as rack mountable audio equipment you could get mount brackets for it and attach it to an IKEA Lack table. That is an idea of what it could look like, they are nice for use in cleaning up an office and providing more functional space will storing some hardware. Also here is the monitor mount that I got. Its a little pricey but totally worth it, and I can confirm that you can fit 6 24 inc monitors with room to spare you probably could fit 6 25 inch monitors if the beveling is massive. http://www.amazon.com/Atdec-SD-FS-H-Spacedec-Freestanding-Monitor/dp/tech-data/B006B5BXH2/ref=de_a_smtd Largo Usagi fucked around with this message at 16:17 on Jan 18, 2013 |
# ? Jan 18, 2013 16:14 |
|
Tedronai66 posted:Better/cheaper than Velcro ties if you need a lot: Velcro rolls at Walmart or wherever, right next to the ties. Usually get 3-6 feet, just cut to length.
|
# ? Jan 18, 2013 17:54 |
|
Josh Lyman posted:How do you attach the velcro to the table? More useful answer: sticky tape or screwed in, piercing one part of the velcro. I've had desk lamps and monitor mounts that clamped to my previous glass desk and put stuff in there as well.
|
# ? Jan 18, 2013 18:18 |
|
Josh Lyman posted:How do you attach the velcro to the table? I have a glass desk in the middle of my room so my cable situation is hard to hide. http://www.velcro.com/Products/Adhesive-Backed.aspx something along those lines.
|
# ? Jan 18, 2013 18:34 |
|
Tedronai66 posted:http://www.velcro.com/Products/Adhesive-Backed.aspx something along those lines. edited for clarity Josh Lyman fucked around with this message at 20:38 on Jan 18, 2013 |
# ? Jan 18, 2013 19:59 |
|
Josh Lyman posted:My understanding is that all adhesive backed velcro has adhesive on the hook and the loop strips, and that's clearly not what we want. Why would you ever put adhesive on the velcro bits?
|
# ? Jan 18, 2013 20:02 |
|
Josh Lyman posted:My understanding is that all adhesive backed velcro has adhesive on the hook and the loop strips, and that's clearly not what we want. This would defeat the purpose of velcro, why would you think that
|
# ? Jan 18, 2013 20:32 |
rscott posted:This would defeat the purpose of velcro, why would you think that You are not reading what he is saying correctly. He is saying both the hook and the loop strips have adhesive on the back, not one or the other. The idea is you take two items, stick one of the two pieces of velcro on each of them, and then can use the permanently glued on velcro to temporarily stick the items together. This is not ideal for cable management purposes.
|
|
# ? Jan 18, 2013 21:01 |
|
Someone should manufacture cables with velcro casing, easy peasy cable management.
|
# ? Jan 18, 2013 21:42 |
|
He probably meant something like this: http://www.amazon.com/Velcro-Reusable-Self-Gripping-Inches-90924/dp/B000F5K82A/ref=sr_1_2?ie=UTF8&qid=1358556712 Where you don't have to cut the plastic ties and can just remove a wire then retie. Surprised people use plastic ties anymore when these have been around forever.
|
# ? Jan 19, 2013 01:53 |
|
Stick the adhesive backed Velcro to your desk. Use the non-adhesive Velcro roll cut to length and stick it to the Velcro on your desk. Voila. Edit: I also use cable staples on a cable that I know I'm not going to move ever, then Velcro the other cables to that anchor one. It's a little more sturdy. durk onion fucked around with this message at 08:17 on Jan 19, 2013 |
# ? Jan 19, 2013 08:13 |
|
What's the recommended model of desk-clamping monitor stand for supporting two 23" monitors? I know it's come up in here before.
|
# ? Jan 20, 2013 18:50 |
|
Either of these will work: http://www.newegg.com/Product/Product.aspx?Item=N82E16824995006 http://www.newegg.com/Product/Product.aspx?Item=N82E16824994005 There are some fancier ones if you want more degrees of freedom, like being able to rotate each monitor, or spill one soda across both of them. Edit: whoops, one of those may not actually clamp to the desk. Looks like it might just balance precariously.
|
# ? Jan 21, 2013 03:34 |
|
Mierdaan posted:What's the recommended model of desk-clamping monitor stand for supporting two 23" monitors? I know it's come up in here before. I have an Ergotron Dual LX waiting in the closet for as soon as my custom desk arrives and is finished by the local shop. It's nice, even just sitting in the box.
|
# ? Jan 21, 2013 18:04 |
|
I couldn't justify the $$$ for an Ergotron, so I ended up getting this thing. I'll report back with my experience, but it (and the one for <=24" monitors) has really good reviews and is a helluva lot cheaper.
|
# ? Jan 21, 2013 22:22 |
|
Mierdaan posted:I couldn't justify the $$$ for an Ergotron, so I ended up getting this thing. I'll report back with my experience, but it (and the one for <=24" monitors) has really good reviews and is a helluva lot cheaper. I will be very interested to see the trip report. I have a 27 and 24" monitor right now that aren't quite high enough (though I could use books I suppose)
|
# ? Jan 21, 2013 22:44 |
|
Tedronai66 posted:I will be very interested to see the trip report. I have a 27 and 24" monitor right now that aren't quite high enough (though I could use books I suppose) http://www.amazon.com/gp/product/B0052AWGLE/ref=oh_details_o00_s00_i00 I got this one about a year ago and it looks pretty similar to that one. It is very sturdy/heavy duty and works great. I have a 27" on one arm and a 24" on the other. I was surprised at how heavy duty it was, I really do love it. e: Recommended it to a friend as well and he was happy with the purchase too. Thom P. Tiers fucked around with this message at 23:27 on Jan 21, 2013 |
# ? Jan 21, 2013 23:10 |
|
|
# ? May 4, 2024 15:24 |
|
I have a couple 19" monitors on one of these, had have been extremely happy with it. Granted, I don't ever move my monitors, so if you want to be able to move them around a bunch it's probably not the best mount. http://www.monoprice.com/products/product.asp?c_id=109&cp_id=10828&cs_id=1082808&p_id=5560&seq=1&format=2
|
# ? Jan 21, 2013 23:43 |