|
In my experience, the solution is to wear them for approximately 1 (one) mile and they won’t be white anymore.
|
![]() |
|
![]()
|
# ? Jun 10, 2024 21:43 |
|
Strife posted:I have a white Rev'It jacket. It's a mesh jacket for summer riding, and buying one in black seemed counter intuitive, so I decided to go with like a white and black aesthetic for my gear. I got a white RF-1400 for Christmas, and needed some gloves, so I found a pair of white Rev'It gloves that actually fit my hands. And since they're the same manufacturer, I assumed they're basically meant to go together. This is just due to the different fabric types. I have a different brand of white mesh jacket also with two pairs of different white/black gloves and the white leather of the gloves are more of a true white than the mesh.
|
![]() |
|
Do not listen to these apologists. That is definitely the worst thing to happen to anybody ever. My Dainese jacket/gloves had the same problem. Luckily the gloves were absolute rubbish, and I sold them to some poor unstylish sap.
|
![]() |
Geekboy posted:In my experience, the solution is to wear them for approximately 1 (one) mile and they won’t be white anymore. How do you manage to keep them clean for so long??
|
|
![]() |
|
Half of my gear has white plastic bits that are now yellow. Only matters if you’re stopped :brap:
|
![]() |
|
Slavvy posted:How do you manage to keep them clean for so long?? It was raining.
|
![]() |
|
White gear is absolutely lovely when the sun is beating down on you. I have a white Rev'it mesh jacket too and it allows me to ride around at 35 degree weather for multiple hours without dieing - as long as i don't stop. But just accept the fact that white fabric will never remain white for very long. White leathers can be cleaned fairly well, but even those will eventually end up with grime that won't come off. Rev'it stupidly doesn't have matching white mesh trousers for their white/fluo yellow/black jackets, so i just got some Dane that's vaguely beige. Idgaf, it just has to let air through and be safe. For being pretty i already have that whole matching Dainese set. LimaBiker fucked around with this message at 09:02 on Jul 7, 2023 |
![]() |
|
LimaBiker posted:Rev'it stupidly doesn't have matching white mesh trousers for their white/fluo yellow/black jackets, so i just got some Dane that's vaguely beige. Idgaf, it just has to let air through and be safe. For being pretty i already have that whole matching Dainese set. https://www.revitsport.com/en/motorcycle-pants-airwave-3-silver ![]()
|
![]() |
|
Chris Knight posted:Airwave 3 comes in "silver" which is light enough imo. I'm pretty happy with mine so far I have the same set, super pleased with them as well.
|
![]() |
|
Hey dudes, after trying on a bunch of stuff at my local cycle gear, I bought a Dainese airframe D1 in a size 40 US/50 euro. Any idea what back protector size I should buy? None of the dianese stuff at the shop seemed to fit snugly into the protector pocket and I didnt like the amount of play in it. Im thinking this one in G2? - https://www.revzilla.com/motorcycle/dainese-pro-armor-g-back-protector?sku_id=1149405 Any other suggestions?
|
![]() |
|
PaintVagrant posted:Hey dudes, after trying on a bunch of stuff at my local cycle gear, I bought a Dainese airframe D1 in a size 40 US/50 euro. Any idea what back protector size I should buy? None of the dianese stuff at the shop seemed to fit snugly into the protector pocket and I didnt like the amount of play in it. I can't remember exactly which one I have but looking at their website yes get a Dainese G2 size. Mine fit pretty well in the pocket.
|
![]() |
|
I have exactly that in my Dainese HF 3 size 40 US/50 Euro.
|
![]() |
|
knox_harrington posted:I can't remember exactly which one I have but looking at their website yes get a Dainese G2 size. Mine fit pretty well in the pocket. Toe Rag posted:I have exactly that in my Dainese HF 3 size 40 US/50 Euro. Much obliged.
|
![]() |
|
I bought an Alpinestars Tech-Air 10 airbag system and the loving thing doesn't work at all, straight out of the box. I can fleetingly get it to connect to the app, showing 0% charge despite being on the charger overnight. Annoyingly I bought it from Germany as it's like half the price there, always a huge pain to return stuff internationally. I'm going to contact A* directly instead of the vendor. loving thing.
|
![]() |
|
Replacing some old d3o armor in my summer gear, d3o with manufacture dates around 2015. Testing a little stuff. Bering Protect Flex Alpha level 2 back protector. ![]() The old one had a gotten a aging crack. ![]() The limb protectors are are revit seesmart level 1 (the blue ones) + a sas-tec tripleflex level 1. ![]()
|
![]() |
|
Someone drew a penis on your kneepad.
|
![]() |
|
The blue pads look like the Dainese proshape armor that I got with a pair of their jeans, seems like the same concept. They are ridiculously thin and light, to the point I hope never to field test them, but I did buy the hip armor set as well since it only came with knee armor. I was trying to find some reviews or stress tests other than hitting myself in the knee while wearing them (results weren't super encouraging but I'd rather have them than nothing ![]() ![]()
|
![]() |
|
Yeah Alpinestars has some as well, but don’t look quite as thin. I tried on a jacket with them, and I could barely even feel them. I want to try swapping out the armor that came with my suit, but last time I looked at them it seemed like the shape was slightly different so it might not work very well. They don’t make a hip version, though, so I wonder what conclusions you can draw from that.
|
![]() |
|
I have those Dainese ones in some jeans, fortunately I haven't crash tested them but yeah they are very thin. I guess the Italians don't want to look like they have child bearing hips.
|
![]() |
|
I use those thin pads in my Kevlar jeans because proper knee armor is just too much for me to wear all day around the city, so it’s the thins or nothing. They don’t look like they’d do much but it sure helps when I’m kneeling down fixing some strap or adjusting the idle or whatever. Even as useless as they probably are I’m glad to have them day to day.
|
![]() |
|
Regardless of how they look or feel, all that matters is what the pads are rated for; the Dainese Pro-shape hip and back appear to both be CE level 1, while their Pro-armor line is mostly level 2.
|
![]() |
|
Yap, this is silly testing for limited use gear Vs old failing protectors. Get level 2++ The only thing of that will get extended hour/year use is the back protector that I ended up swapping into my main badlands touring suit. Due to the local climate and predisposition to rain showers every day in the late summer my mesh/air gear is sadly limited use.
Supradog fucked around with this message at 09:10 on Jul 12, 2023 |
![]() |
|
Early on in my riding career (so like three years ago) I was told by more experienced people that it was safer to wear a separate back protector under the jacket rather than relying on a pad that will fit in the jacket pocket since you can use a longer pad that covers more spine that way, so that's what I've been doing. The argument makes a certain amount of sense to me and my pad goes from the seat to the helmet base (they actually touch if I look upward which I only do when I see interesting birds or aircraft and I I really shouldn't be looking at those when riding anyways) so fitting a longer pad would be impossible, but it's not hassle free and I've forgotten to wear it at all more than once. A few days ago I zipped my mesh jacket/pants together along the waist for the first time ever as an experiment, and I had to tuck the back pad into the pants to make it work. It felt very nice and snug when sitting in the saddle but not so nice when standing up. 3/5 will try again maybe.
|
![]() |
|
Which back protector do you have?
|
![]() |
|
Invalido posted:Early on in my riding career (so like three years ago) I was told by more experienced people that it was safer to wear a separate back protector under the jacket rather than relying on a pad that will fit in the jacket pocket since you can use a longer pad that covers more spine that way, so that's what I've been doing. The argument makes a certain amount of sense to me and my pad goes from the seat to the helmet base (they actually touch if I look upward which I only do when I see interesting birds or aircraft and I I really shouldn't be looking at those when riding anyways) so fitting a longer pad would be impossible, but it's not hassle free and I've forgotten to wear it at all more than once. Yes that is in general what you should do when zipping jacket to pants. If you look at 2-piece suits the built-in back protector is longer than one in a standalone jacket.
|
![]() |
|
moxieman posted:Which back protector do you have? Held Nagato
|
![]() |
|
I got an AGV K6 on the most recent clearance for $350. I really like it, its very light and fits well.
|
![]() |
|
Picked up an RPHA 70 ST for $250 on clearance that arrives today. I like my Arai, but after putting in a Cardo I get some pressure on my left ear, even though I've messed with the speaker positioning a bunch and am not bothered on the right side. If this RPHA fits my big dumb XXL head, I'll move the speakers over to that and use it for my long distance rides. It'll be nice to have an internal sunshade as well, even though my choice of Honeywell/Uvex impact-rated sunglasses with anti-fog work well.
|
![]() |
|
![]() ![]() whoopsie. Well we had a good run there, 6 years isn't too shabby for gloves that get used about 9 months per year, but it's definitely time to go looking for a new pair. Any recommendations for the lightest, most ventilated gloves possible (it's 33°C outside right now at 9am, will be 39°C at midday ![]() Or I could just try going for the latest version of those (Sand 4), but there's no one that has them available to try on in the vicinity, while I have an Alpinestars dealer nearby, also a Dainese one but I never managed to find a Dainese glove comfortable enough for my hands, while their pants and jackets are great for me. TorakFade fucked around with this message at 08:15 on Jul 21, 2023 |
![]() |
|
TorakFade posted:Any recommendations for the lightest, most ventilated gloves possible (it's 33°C outside right now at 9am, will be 39°C at midday https://www.alpinestars.com/products/smx-1-air-v2-gloves The backs of these are mostly mesh where they're not armour, they're super breathable and what I wear when it's hot.
|
![]() |
|
knox_harrington posted:https://www.alpinestars.com/products/smx-1-air-v2-gloves If you want something like this but with a bit more leather, I have the SPX Air Carbon gloves.
|
![]() |
|
knox_harrington posted:https://www.alpinestars.com/products/smx-1-air-v2-gloves +1 these are excellent hot weather gloves and the Velcro on them hasn't gone to poo poo unlike my much more expensive held gauntlets
|
![]() |
|
TorakFade posted:
Please please don’t wait this long to replace gloves again. Is that scaphoid slider rubbery or hard plastic?
|
![]() |
|
Russian Bear posted:Please please don’t wait this long to replace gloves again. Rubbery. Probably the worst thing about those gloves, seen as it won't really slide... I guess it's more thought to handle falls on dirt than asphalt being adventure gloves. Anyway, at the A* shop they didn't have the Air gloves, and the Air Carbon was too heavy and bulky for my taste, ended up getting Alpinestars Halo gloves - again a more dirt/adventure-oriented glove, probably it's not the safest (even though I ride a 300cc scooter, not a Hayabusa...) but there was nothing as light and comfortable for my hands by a wide margin in the shop. they're nicely perforated (not as much as others but hands don't get immediately sweaty wearing them in the shop) and there's plenty of stretchy textile panels, and they're certified so should be fine for basic safety hopefully. I promise I won't wait until these are destroyed before getting a new pair ![]()
|
![]() |
|
I had a Nelson Rigg tail bag I got for free. I was going to use it tomorrow, but apparently someone stole it from the garage where I park. It was OK, but I want to buy a different replacement. I was looking at a Kriega Drypack, not sure exactly which size. I want something that attaches without any special hardware. Any others to consider?
|
![]() |
|
TorakFade posted:
It's been 46 degrees every day for weeks and I know it's bad advice, but sometimes I ride around town without a jacket. Just too much. Last year I tried an undershirt with water channels all through it that you would put in the freezer. It was good for about 15 minutes.
|
![]() |
|
Yeah it sucks to commute home in the afternoon anytime it's above 90 here in the Portland area. I've got a fairly light jacket but I still feel rivers of sweat running down my back at stop lights.
|
![]() |
|
Mr. Wiggles posted:It's been 46 degrees every day for weeks and I know it's bad advice, but sometimes I ride around town without a jacket. Just too much. I guess you could always wear something like this if you're not worried about looking like a giant nerd. ![]() That'll at least give you some impact protection.
|
![]() |
|
I've got an evaporative vest, Hyperkewl, that holds a bunch of water that you wears underneath a jacket and with a little airflow that thing really cools you down.
|
![]() |
|
![]()
|
# ? Jun 10, 2024 21:43 |
|
I've got a perforated leather jacket from Dainese and it works for me other than being cooked a little at lights. But I don't mind the heat that much so it's whatever 🤷🏼♂️
|
![]() |